By default, if a TOE TLS socket stops receiving data for more than 5
seconds, revert the connection back to plain TOE mode. This provides
a fallback if the userland SSL library does not support KTLS. In
addition, for client TLS 1.3 sockets using connect(), the TOE socket
blocks before the handshake has completed since the socket option is
only invoked for the final handshake.
The timeout defaults to 5 seconds, but can be changed at boot via the
hw.cxgbe.toe.tls_rx_timeout tunable or for an individual interface via
the dev.<nexus>.toe.tls_rx_timeout sysctl.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27470
This includes mbufs waiting for data from sendfile() I/O requests, or
mbufs awaiting encryption for KTLS.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27469
If TOE TLS is requested for an unsupported cipher suite or TLS
version, disable TLS processing and fall back to plain TOE. In
addition, if an error occurs when saving the decryption keys in the
card's memory, disable TLS processing and fall back to plain TOE.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27468
If a TOE TLS socket ends up using an unsupported TLS version or
ciphersuite, it must be downgraded to a "plain" TOE socket with TLS
encryption/decryption performed on the host. The previous
implementation of this fallback was incomplete and resulted in hung
connections.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27467
* uninitialised variable use
* Using AXGBE_SET_ADV() where it was intended; using AXGBE_ADV()
seems wrong and also causes a compiler warning.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D26839
DTS node can have this property which configure the burst length
for both TX and RX if it's the same.
This unbreak if_dwc on Allwinner A20 and possibly other boards that
uses this prop.
Reported by: qroxana <qroxana@mail.ru>
It is common for freelists to be starving when a netmap application
stops. Mailbox commands to free queues can hang in such a situation.
Avoid that by not freeing the queues when netmap is switched off.
Instead, use an alternate method to stop the queues without releasing
the context ids. If netmap is enabled again later then the same queue
is reinitialized for use. Move alloc_nm_rxq and txq to t4_netmap.c
while here.
MFC after: 1 week
Sponsored by: Chelsio Communications
Allow fdt devices to be used as debug ports for gdb(4).
A debug console can be specified with the "freebsd,debug-path" property
in the device tree's /chosen node, or using the environment variable
hw.fdt.dbgport.
The device should be specified by its name in the device tree, for
example hw.fdt.dbgport="serial2".
PR: 251053
Submitted by: Dmitry Salychev <dsl@mcusim.org>
Submitted by: stevek (original patch, D5986)
Reviewed by: andrew, mhorne
Differential Revision: https://reviews.freebsd.org/D27422
r367917 fixed the backpressure on the netmap rxq being stopped but that
doesn't help if some other netmap rxq is starved (because it is stopping
too although the driver doesn't know this yet) and blocks the pipeline.
An alternate fix that works in all cases will be checked in instead.
Sponsored by: Chelsio Communications
A failure in iflib_device_register() can result in
em_free_pci_resources() being called after receive queues have already
been freed. In particular, a failure to allocate IRQ resources will goto
fail_queues, where IFDI_QUEUES_FREE() will be called via
iflib_tx_structures_free(), preceding the call to IFDI_DETACH().
Cope with this by checking adapter->rx_queues before dereferencing it.
A similar check is present in ixgbe(4) and ixl(4).
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27260
- in nvme_qpair_process_completions() do dma sync before completion buffer
is used.
- in nvme_qpair_submit_tracker(), don't do explicit wmb() also for arm
and arm64. Bus_dmamap_sync() on these architectures is sufficient to ensure
that all CPU stores are visible to external (including DMA) observers.
- Allocate completion buffer as BUS_DMA_COHERENT. On not-DMA coherent systems,
buffers continuously owned (and accessed) by DMA must be allocated with this
flag. Note that BUS_DMA_COHERENT flag is no-op on DMA coherent systems
(or coherent buses in mixed systems).
MFC after: 4 weeks
Reviewed by: mav, imp
Differential Revision: https://reviews.freebsd.org/D27446
Some USB WLAN devices have "on-board" storage showing up as umass
and making the root mount wait for a very long time.
The WLAN drivers know how to deal with that an issue an eject
command later when attaching themselves.
Introduce a quirk to not probe these devices as umass and avoid
hangs and confusion altogether.
Reviewed by: hselasky, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27434
Otherwise qat_detach() may attempt to deregister an unrelated crypto
driver if an error occurs in qat_attach() before crypto_get_driverid()
is called, since 0 is a valid driver ID.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
If firmware_get() fails to find a loaded firmware image, it searches for
candidate KLDs to load. It will search for a KLD containing a module
with the same name as the requested image, and failing that, will load a
KLD with the same basename as the requested image.
The module name given by fw_stub.awk is simply "<mangled KLD name>_fw".
QAT firmware modules contain two images, neither of which match either
of the names used during lookup, so automatic loading of firmware images
after mountroot does not work. Work around this by using the same
string for the first image name and for the KLD basename.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Implement vt_vbefb to support Vesa Bios Extensions (VBE) framebuffer with VT.
vt_vbefb is built based on vt_efifb and is assuming similar data for
initialization, use MODINFOMD_VBE_FB to identify the structure vbe_fb
in kernel metadata.
struct vbe_fb, is populated by boot loader, and is passed to kernel via
metadata payload.
Differential Revision: https://reviews.freebsd.org/D27373
These swapping functions violate BUSDMA contract - we cannot write
to armed (by bus_dmamap_sync(PRE_..)) buffers. Remove them at least
from little endian machines until a better solution will be developed.
Reviewed by: imp
MFC after: 3 weeks
We read the bus end value from the _CRS method. On some systems we need
to further limit it based on the MCFG table.
Support this by setting a default value, then update it if needed in the
_CRS table, and finally reduce it if it is past the end of the MCFG tabel.
This will allow for both systems that use either method to encode this
value.
This partially reverts r347929, removing the error printf.
Reviewed by: philip
Tested by: philip, Andrey Fesenko <f0andrey_gmail.com>
MFC after: 2 weeks
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27274
With 4KB page size the 2MB is the maximum we can address with one page PRP.
Going further would require chaining, that would add some more complexity.
On the other side, to reduce memory consumption, allocate the PRP memory
respecting maximum transfer size reported in the controller identify data.
Many of NVMe devices support much smaller values, starting from 128KB.
To do that we have to change the initialization sequence to pull the data
earlier, before setting up the I/O queue pairs. The admin queue pair is
still allocated for full MIN(maxphys, 2MB) size, but it is not a big deal,
since there is only one such queue with only 16 trackers.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
- Remove code duplication by adding two new functions to execute prepared
queue entry via either mbox or request queue and wait for result.
- Since the new function executing via request queue sleeps any way, make
it sleep also in case of overflows or handle shortages. It should make it
more reliable and less affecting other less flexible request queue users.
- Turn isp_target_put_entry() into not target-specific isp_send_entry().
- Make handling of responses with control handles more universal.
- Move RQSTYPE_RPT_ID_ACQ handling into new function.
- Inline isp_handle_other_response(), becoming trivial after above.
- Clean the list of IOCBs from pre-24xx ones.
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
It was broken by design and unused for years due to conflicts between
different threads, fighting for the same set of mailbox registers, not
designed for multiple requests at a time. So either request has to be
synchronous and spin under the lock, or it should be sent asynchronously
through the queues as Mailbox Command IOCB or some other way.
This removes any OS specifics from the wait code, so it can be inlined.
