hints work on per-channel basis as documented, rather than chip-wide. Also,
when configured via hints, return BUS_PROBE_NOWILDCARD on successful hints
match, so that the hints don't bogusly match other types of i2c chips.
This patch has the driver for 10Gigabit Ethernet controller in AMD
SoC. This driver is written compatible to the Iflib framework. The
existing driver is for the old version of hardware. The submitted
driver here is for the recent versions of the hardware where the Ethernet
controller is PCI-E based.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25793
Push the root seed version to userspace through the VDSO page, if
the RANDOM_FENESTRASX algorithm is enabled. Otherwise, there is no
functional change. The mechanism can be disabled with
debug.fxrng_vdso_enable=0.
arc4random(3) obtains a pointer to the root seed version published by
the kernel in the shared page at allocation time. Like arc4random(9),
it maintains its own per-process copy of the seed version corresponding
to the root seed version at the time it last rekeyed. On read requests,
the process seed version is compared with the version published in the
shared page; if they do not match, arc4random(3) reseeds from the
kernel before providing generated output.
This change does not implement the FenestrasX concept of PCPU userspace
generators seeded from a per-process base generator. That change is
left for future discussion/work.
Reviewed by: kib (previous version)
Approved by: csprng (me -- only touching FXRNG here)
Differential Revision: https://reviews.freebsd.org/D22839
There is no functional change for the existing Fortuna random(4)
implementation, which remains the default in GENERIC.
In the FenestrasX model, when the root CSPRNG is reseeded from pools due to
an (infrequent) timer, child CSPRNGs can cheaply detect this condition and
reseed. To do so, they just need to track an additional 64-bit value in the
associated state, and compare it against the root seed version (generation)
on random reads.
This revision integrates arc4random(9) into that model without substantially
changing the design or implementation of arc4random(9). The motivation is
that arc4random(9) is immediately reseeded when the backing random(4)
implementation has additional entropy. This is arguably most important
during boot, when fenestrasX is reseeding at 1, 3, 9, 27, etc., second
intervals. Today, arc4random(9) has a hardcoded 300 second reseed window.
Without this mechanism, if arc4random(9) gets weak entropy during initial
seed (and arc4random(9) is used early in boot, so this is quite possible),
it may continue to emit poorly seeded output for 5 minutes. The FenestrasX
push-reseed scheme corrects consumers, like arc4random(9), as soon as
possible.
Reviewed by: markm
Approved by: csprng (markm)
Differential Revision: https://reviews.freebsd.org/D22838
Fortuna remains the default; no functional change to GENERIC.
Big picture:
- Scalable entropy generation with per-CPU, buffered local generators.
- "Push" system for reseeding child generators when root PRNG is
reseeded. (Design can be extended to arc4random(9) and userspace
generators.)
- Similar entropy pooling system to Fortuna, but starts with a single
pool to quickly bootstrap as much entropy as possible early on.
- Reseeding from pooled entropy based on time schedule. The time
interval starts small and grows exponentially until reaching a cap.
Again, the goal is to have the RNG state depend on as much entropy as
possible quickly, but still periodically incorporate new entropy for
the same reasons as Fortuna.
Notable design choices in this implementation that differ from those
specified in the whitepaper:
- Blake2B instead of SHA-2 512 for entropy pooling
- Chacha20 instead of AES-CTR DRBG
- Initial seeding. We support more platforms and not all of them use
loader(8). So we have to grab the initial entropy sources in kernel
mode instead, as much as possible. Fortuna didn't have any mechanism
for this aside from the special case of loader-provided previous-boot
entropy, so most of these sources remain TODO after this commit.
Reviewed by: markm
Approved by: csprng (markm)
Differential Revision: https://reviews.freebsd.org/D22837
r365732 was the first attempt to get an accurate count but it was
writing to some read-only registers to clear them and that obviously
didn't work. Instead, note the counter's value when it is supposed to
be cleared and subtract it from future readings.
dev.<port>.stats.rx_fcs_error should not be serviced from the MPS
register for T6.
The stats.* sysctls should all use T5_PORT_REG for T5 and above. This
must have been missed in the initial T5 support years ago. Fix it while
here.
MFC after: 3 days
Sponsored by: Chelsio Communications
Allow the DSCP codepoint also to be configurable
for the traffic in the direction from the initiator
to the target, such that writes and any requests
are also treated in the appropriate QoS class.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26714
APM BIOS was relevant only to early laptops (approximately P166 or
P200 and slower). These have not been relevant for a long time, and
this code has been untested for a long time (as far as I can
tell). The APM compat code in ACPI and the apm(8) command is not being
retired. Both of these items are still in use (apm(8) is more
scriptable than the replacement acpiconf, for the most part). This has
been commented out of i386 GENERIC since 2002. This code is not
relevant to any other port.
Discussed on: arch@
These kind of drops come for free in the sense that they do not use the
filter TCAM or any other resource that wouldn't normally be used during
rx. Frames dropped by the hardware get counted in the MAC's rx stats
but are not delivered to the driver.
hw.cxgbe.attack_filter
Set to 1 to enable the "attack filter". Default is 0. The attack
filter will drop an incoming frame if any of these conditions is true:
src ip/ip6 == dst ip/ip6; tcp and src/dst ip is not unicast; src/dst ip
is loopback (127.x.y.z); src ip6 is not unicast; src/dst ip6 is loopback
(::1/128) or unspecified (::/128); tcp and src/dst ip6 is mcast
(ff00::/8).
hw.cxgbe.drop_ip_fragments
Set to 1 to drop all incoming IP fragments. Default is 0. Note that
this drops valid frames.
hw.cxgbe.drop_pkts_with_l2_errors
Set to 1 to drop incoming frames with Layer 2 length or checksum errors.
Default is 1.
hw.cxgbe.drop_pkts_with_l3_errors
Set to 1 to drop incoming frames with IP version, length, or checksum
errors. Default is 0.
hw.cxgbe.drop_pkts_with_l4_errors
Set to 1 to drop incoming frames with Layer 4 length, checksum, or other
errors. Default is 0.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Cleanup all host resources, SYSCTLs, MSIX vectors and memory used
by the host and only leave the device allocated memory behind, if any,
because it may still be in use, when the PCI remove function is called.
Else future probe calls may fail due to SYSCTLs already existing.
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The kernel globals for kenv are confined to 2 files that need them and
a few that likely shouldn't (but as written the code does). Move them
from sys/systm.h to sys/kenv.h. This removed a XXX from systm.h and
cleans it up a little bit...
Both cxgbe(4) and mlx5(4) wrapped the existing send tag header with
their own identical headers that stored the type that the
type-specific tag structures inherited from, so in practice it seems
drivers need this in the tag anyway. This permits removing these
extra header indirections (struct cxgbe_snd_tag and struct
mlx5e_snd_tag).
In addition, this permits driver-independent code to query the type of
a tag, e.g. to know what type of tag is being queried via
if_snd_query.
Reviewed by: gallatin, hselasky, np, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26689
This is described in RealTek's driver as a "RTL8168 Series add-on card."
PR: 250037
Submitted by: Hiroshi HASEGAWA <hhase1973@gmail.com>
MFC after: 1 week
Driver for pwm-backlight compatible device.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26252
This is a simple subsystem that allow drivers to register as a backlight.
Each backlight creates a device node under /dev/backlight/backlightX and
an alias based on the name provided.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26250
These tunables can only be set to a valid cluster size (2K, 4K, 9K, or
16K) as documented in the man page. Anything else could lead to a
panic on interface up.
Reported by: mav@
MFC after: 1 week
Sponsored by: Chelsio Communications
Some DSDT entries have multiple interrupts for one device.
Add support for it.
This fixes ahci on NXP LS2160 and genet on RPi4
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25145
ccr(4) uses software to handle GCM and CCM requests not supported by
the crypto engine (e.g. with only AAD and no payload). This change
adds a fallback for a few more requests such as those with more SGL
entries than can fit in a work request (this can happen for GCM when
decrypting a TLS record split across 15 or more packets).
Reported by: Chelsio QA
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26582
Rather than placing the epoch around the entire receive loop which
might call into rtwn_rx_frame() and USB and sleep, split the loop
into two[1] and leave us with one unlock/lock cycle as well.
PR: 249925
Reported by: thj, (rkoberman gmail.com)
Tested by: thj
Suggested by: adrian [1]
Reviewed by: adrian
MFC after: 3 days
Sponsored by: The FreeBSD Foundation (initially, paniced my iwl lab host)
Differential Revision: https://reviews.freebsd.org/D26554
This is mostly needed for a common arm64/amd64 iommu code.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26587
This function isn't ACPI dependent and we may use it on FDT systems
as well.
o Don't repeat the function declaration, include iommu.h instead.
Reviewed by: andrew, kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26584
Bind the netmap tx queues to a special '0xff' scheduling class which
makes the firmware skip some processing related to rate limiting on the
outgoing traffic. Future firmwares will do this automatically.
MFC after: 1 week
Sponsored by: Chelsio Communications
- Only active netmap receive queues should be in the RSS lookup table.
- The RSS table should be restored for NIC operation when the last
active netmap queue is switched off, not the first one.
- Support repeated netmap ON/OFF on a subset of the queues. This works
whether the the queues being enabled and disabled are the only ones
active or not. Some kring indexes have to be reset in the driver for
the second case.
MFC after: 1 week
Sponsored by: Chelsio Communications
In some cases, the syscon driver may be used by consumer requiring better
control about locking (ie. it may be used as registe file provider for clock
driver which needs locked access to multiple registers).
Add fine locking protocol methods together with bunch of helper functions
in syscon driver and implement this functionality in syscon_generic driver.
MFC after: 4 weeks
Syscon can also have child nodes that share a registration file with it.
To do this correctly, follow these steps:
- subclass syscon from simplebus and expose it if the node is also
"simple-bus" compatible.
- block simplebus probe for this compatible string, so it's priority
(bus pass) doesn't colide with syscon driver.
While I'm in, also block "syscon", "simple-mfd" for the same reason.
MFC after: 4 weeks
We have (two versions) of MS() and SM() macros which we use throughout
the wireless code. Change all but three places (ath_hal, rtwn, and rsu)
to the newly provided _IEEE80211_MASKSHIFT() and _IEEE80211_SHIFTMASK()
macros. Also change one internal case using both _S and _M instead of
just _S away from _M (one of the reasons rtwn and rsu were not changed).
This was done semi-mechanically. No functional changes intended.
Requested by: gnn (D26091)
Reviewed by: adrian (pre line wrap)
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Differential Revision: https://reviews.freebsd.org/D26539
