o Provide a new VOP_GETPAGES_ASYNC(), which works like VOP_GETPAGES(), but
doesn't sleep. It returns immediately, and will execute the I/O done handler
function that must be supplied as argument.
o Provide VOP_GETPAGES_ASYNC() for the FFS, which uses vnode_pager.
o Extend pagertab to support pgo_getpages_async method, and implement this
method for vnode_pager.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
man(1) now first test the manpage to run with mandoc to make sure it can be
rendered.
In case groff cannot be found (because base has been built WITHOUT_GROFF) it
recommands to install groff from the packages
bsnmpd's snmp_hostres module:
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:204:20: error: absolute value function 'abs' given an argument of type 'const long' but has parameter of type 'int' which may cause truncation of value [-Werror,-Wabsolute-value]
str[9] = (u_char)(abs(tm->tm_gmtoff) / 3600);
^
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:204:20: note: use function 'labs' instead
str[9] = (u_char)(abs(tm->tm_gmtoff) / 3600);
^~~
labs
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:205:22: error: absolute value function 'abs' given an argument of type 'const long' but has parameter of type 'int' which may cause truncation of value [-Werror,-Wabsolute-value]
str[10] = (u_char)((abs(tm->tm_gmtoff) % 3600) / 60);
^
usr.sbin/bsnmpd/modules/snmp_hostres/hostres_snmp.c:205:22: note: use function 'labs' instead
str[10] = (u_char)((abs(tm->tm_gmtoff) % 3600) / 60);
^~~
labs
Since tm::tm_gmtoff is a long, use labs(3) instead.
MFC after: 3 days
usr.sbin/rtadvd:
usr.sbin/rtadvd/rtadvd.c:1291:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
abs(preferred_time - pfx->pfx_pltimeexpire) > rai->rai_clockskew) {
^
usr.sbin/rtadvd/rtadvd.c:1291:7: note: remove the call to 'abs' since unsigned values cannot be negative
abs(preferred_time - pfx->pfx_pltimeexpire) > rai->rai_clockskew) {
^~~
usr.sbin/rtadvd/rtadvd.c:1324:7: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
abs(valid_time - pfx->pfx_vltimeexpire) > rai->rai_clockskew) {
^
usr.sbin/rtadvd/rtadvd.c:1324:7: note: remove the call to 'abs' since unsigned values cannot be negative
abs(valid_time - pfx->pfx_vltimeexpire) > rai->rai_clockskew) {
^~~
2 errors generated.
These warnings occur because both preferred_time and pfx_pltimeexpire
are uint32_t's, so the subtraction expression is also unsigned, and
calling abs() is a no-op.
However, the intention was to look at the absolute difference between
the two unsigned quantities. Introduce a small static function to
clarify what we're doing, and call that instead.
Reviewed by: hrs
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1197
SAF1761 OTG driver. Currently the driver logic is very simple and
double buffering the USB transactions is not done. Also you need to
use an external USB high speed USB HUB for reliable FULL speed
outgoing ISOCHRONOUS traffic, because the internal one chokes on
so-called split transfers above 188 bytes.
Otherwise, clang can effectively remove the first iteration of the for
loops where this macro is invoked, and as a result, "cmp r0, #99" fails
to assemble.
Obtained from: joerg at netbsd
MFC after: 3 days
establishing connection.
This is a workaround for Chelsio TOE driver, that does not update socket
buffer size in hardware after connection established, and unless that is
done beforehand, kernel code will stuck, attempting to send/receive full
PDU at once.
MFC after: 1 week
usr.bin/locate:
usr.bin/locate/locate/util.c:249:29: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
MAXPATHLEN, abs(i) < abs(htonl(i)) ? i : htonl(i));
^
usr.bin/locate/locate/util.c:249:29: note: remove the call to 'abs' since unsigned values cannot be negative
MAXPATHLEN, abs(i) < abs(htonl(i)) ? i : htonl(i));
^~~
usr.bin/locate/locate/util.c:274:32: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
MAXPATHLEN, abs(word) < abs(htonl(word)) ? word :
^
usr.bin/locate/locate/util.c:274:32: note: remove the call to 'abs' since unsigned values cannot be negative
MAXPATHLEN, abs(word) < abs(htonl(word)) ? word :
^~~
The problem is that ntohl() always returns an unsigned quantity. In
this case, it's expected to be cast back to a signed integer, but to
stop complaints about abs() we just store it into an integer, and don't
call ntohl() again.
Reviewed by: ngie
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1196
usr.bin/cpio on amd64 (or any arch with 64-bit time_t):
contrib/libarchive/cpio/cpio.c:1143:6: error: absolute value function 'abs' given an argument of type 'long' but has parameter of type 'int' which may cause truncation of value [-Werror,-Wabsolute-value]
if (abs(mtime - now) > (365/2)*86400)
^
contrib/libarchive/cpio/cpio.c:1143:6: note: use function 'labs' instead
if (abs(mtime - now) > (365/2)*86400)
^~~
labs
1 error generated.
This is because time_t is a long on amd64. To avoid the warning, just
copy the equivalent test from a few lines before, which is used in the
Windows case, and which is type safe.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1198
I've missed that iscsi_outstanding_remove() frees the second pointer,
so it should no longer be used. And in fact we don't really need to.
MFC after: 2 weeks
During heavy reads data copying in icl_pdu_get_data() may consume large
percent of CPU time. Moving it out of the lock significantly reduces
lock hold time and respectively lock congestion on read operations.
MFC after: 2 weeks
the first cacheline if the buffer start address is not on a cacheline
boundary. Normally a buffer which is not cacheline-aligned is bounced,
but a special rule applies for mbufs, which are always misaligned due to
the header. We know the cpu will not write to the header while dma is in
progress (so we've been told anyway), but it may have written to the
header shortly before starting a read, so we need to flush that write out
to memory before invalidating the whole buffer.
In collaboration with Mical Meloun and Svata Kraus.
mandoc(1) does not provide an equivalent of the GNU groff's soelim(1) as an
external binary. It does provide the funcitonnality but internally.
Lots if manpages in ports uses ".so" directives to include the content of
another manpage, which works properly if the manpages are not compressed.
With compressed manpages it will fail. So we need to preprocess those manpages
with soelim(1) before compressing them.
soeliminate(1) add the minimum functionnality from soelim(1) required for that
task, in order to still be able to prepare properly those manpages in case we
ship the base system only with mandoc as a manpage renderer.
soeliminate(1) accept all the arguments from soelim(1) for compatibility but
only '-I dir' is really functionnal.
Name it soeliminate and not soelim, so groff from base or ports can still call
soelim(1) for its internal use and avoid potential incompatibilities
MFC after: 1 month
