This patch modifies the zfs_ioc_snapshot_list_next() ioctl to enable it
to take input parameters that alter the way looping through the list of
snapshots is performed. The idea here is to restrict functions that
throw away some of the snapshots returned by the ioctl to a range of
snapshots that these functions actually use. This improves efficiency
and execution speed for some rollback and send operations.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#8077zfsonlinux/zfs@4c0883fb4a
MFC after: 2 weeks
Some dts are including dtsi that also contain a /dts-v1/ tag at the
top. GNU DTC doesn't seems to have a problem with that so fix our
dtc to behave the same.
Reviewed by: kevans
MFC after: 1 week
Drop portions that are unlit or redundant with llvm-libunwind: builtin.c,
unwind.h, and unwind_arm_ehabi_stub.c.
This code should now work with -fPIE binaries, should we choose to build any
that way.
When backtrace() array is full, signal an error so the underlying
Itanium-style C++ exception handling library (llvm-libunwind) knows to stop
tracing instead of continuing. (It should stop on its own when it finishes
unwinding, so this is mostly an extra seatbelt against an infinite loop bug
in the unwinder.)
The fill_elf_hwcap() function expects to find only cpu nodes under the
/cpus entry of the device tree. Newer versions of QEMU insert a cpu-map
node which describes the CPU topology, breaking this function. To fix
this, simply skip any non-cpu entries.
Reviewed by: markj, kp, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22151
If neither FULL_BUF_TRACKING nor BUF_TRACKING are defined, then the body of
buf_track() becomes empty. Mark the arguments with "__unused" so the
compiler doesn't complain about unused arguments in that case.
Reported by: Bruce Leverett (Panasas)
Reviewed by: cem (on IRC)
MFC after: 1 month
Sponsored by: Panasas
[ARM] VFPv2 only supports 16 D registers.
r361845 changed the way we handle "D16" vs. "D32" targets; there used
to be a negative "d16" which removed instructions from the
instruction set, and now there's a "d32" feature which adds
instructions to the instruction set. This is good, but there was an
oversight in the implementation: the behavior of VFPv2 was changed.
In particular, the "vfp2" feature was changed to imply "d32". This is
wrong: VFPv2 only supports 16 D registers.
In practice, this means if you specify -mfpu=vfpv2, the compiler will
generate illegal instructions.
This patch gets rid of "vfp2d16" and "vfp2d16sp", and fixes "vfp2"
and "vfp2sp" so they don't imply "d32".
Differential Revision: https://reviews.llvm.org/D67375
Pull in r372187 from upstream clang trunk (by Eli Friedman):
[ARM] Update clang for removal of vfp2d16 and vfp2d16sp
Matching fix for https://reviews.llvm.org/D67375 (r372186).
Differential Revision: https://reviews.llvm.org/D67467
This should fix clang generating invalid opcodes for floating point
operations on armv6.
Requested by: mmel
MFC after: 3 days
Use a separate make variable to specify the linker script so that it is
only applied at link time and not during intermediate generation of .fwo
files.
This ensures that the .text padding inserted by the amd64 linker script
is applied to the stub module load handlers embedded in firmware
modules.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22125
This saves 320 bytes of the precious stack space.
The only negative aspect of the change I can think of is that the
struct thread increased by 320 bytes obviously, and that 320 bytes are
not swapped out anymore. I believe the freed stack space is much more
important than that. Also, current struct thread size is 1392 bytes
on amd64, so UMA will allocate two thread structures per (4KB) slab,
which leaves a space for pcb without increasing zone memory use.
Reviewed by: alc, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D22138
The RK805 regs array was being allocated before it's required size was
known, causing the driver to use memory it didn't own. That memory
was subsequently allocated and used elsewhere causing later fatal data
aborts in rk805_map().
Whilst I'm here, add a sanity check to catch unsupported PMICs (this
shouldn't ever get hit because the probe should have failed).
Reviewed by: manu
MFC after: 1 week
Sponsored by: Google
In theory the eventhandler invoke should be in the same VNET as
the the current interface. We however cannot guarantee that for
all cases in the future.
So before checking if the fragmentation handling for this VNET
is active, switch the VNET to the VNET of the interface to always
get the one we want.
Reviewed by: hselasky
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22153
This is a driver for the USB3 PHY present in the RK3399.
While the phy support DP (Display Port) the driver doesn't has we have
no driver to test this with for now.
All the lane and pll configuration is just magic values from rockchip.
While the manual have some info on those registers it's really hard to
understand how to calculate those values (if there is a way).
MFC after: 1 month
The change to conform to RFC 8200 for overlapping fragments now frees
the entire reassembly queue if the overlapping fragments are not an
exact match.
As a result we do see one less packet in the timeout statistics from
expiry. No other statistics change as the event is not counted.
It can be argued that we should improve the statistics counters in
that case.
This test case update should have been committed alongside the original
commit.
Pointyhat to: bz
MFC after: 3 weeks
X-MFC with: r354046
Sponsored by: Netflix
When allocating the IPv6 fragement packet queue entry we do checks
against counters and if we pass we increment one of the counters
to claim the spot. Right after that we have two cases (malloc and MAC)
which can both fail in which case we free the entry but never released
our claim on the counter. In theory this can lead to not accepting new
fragments after a long time, especially if it would be MAC "refusing"
them.
Rather than immediately subtracting the value in the error case, only
increment it after these two cases so we can no longer leak it.
MFC after: 3 weeks
Sponsored by: Netflix
Previously the code used sbttous() before microseconds comparison in one
place, sbttons() and nanoseconds in another, division by SBT_1US and
microseconds in yet another.
Now the code consistently uses multiplication by SBT_1US to convert
microseconds to sbintime_t before comparing them with periods between
calls to sbinuptime(). This is fast, this is precise enough (below
0.03%) and the periods defined by the protocol cannot overflow.
Reviewed by: imp (D22108)
MFC after: 2 weeks
The lock is used only for start / stop signaling.
It is used only for 'flags' field and the related condition variable.
This change is a follow-up to r354067, it was suggested by Warner in
D22107.
Suggested by: imp
MFC after: 1 week
This is similar to what is done around other calls that lead to
own_command_wait() that can sleep.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22107
Some controllers cannot preset future output value while the pin is in
input mode. This adds a fallback for those controllers. The new code
assumes that a controller reports an error in that case.
For example, all hardware supported by nctgpio behaves in that way.
This is a temporary measure. In the future we will use
GPIO_PIN_PRESET_LOW / GPIO_PIN_PRESET_HIGH to preset the output either
in hardware, if supported, or in software (e.g., in
gpiobus_pin_setflags).
While here, I extracted common functionality of gpioiic_set{sda,scl} and
gpioiic_get{sda,scl} to gpioiic_setpin and gpioiic_getpin respectively.
MFC after: 2 weeks
The MIPS bug was introduced by upstream commit 7403cb630, which failed
to account for the additional indirection introduced and also dropped
one of the checks; change it to the standard "NULL-or-empty" check as
used elsewhere in BFD, which is also what upstream now has.
Submitted by: James Clarke <jrtc27@jrtc27.com>
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21911
Clang trunk recently gained this new warning, and complains about the
sizeof(trim->data) / sizeof(struct nvme_dsm_range) expression, since
the left hand side's element type (char) does not match the right hand
side's type. The byte buffer is unnecessary so we can remove it to clean
up the code and fix the warning at the same time.
No functional change.
Submitted by: James Clarke <jrtc27@jrtc27.com>
Reviewed by: imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21912
When we receive the packet with the first fragmented part (fragoff=0)
we remember the length of the unfragmentable part and the next header
(and should probably also remember ECN) as meta-data on the reassembly
queue.
Someone replying this packet so far could change these 2 (3) values.
While changing the next header seems more severe, for a full size
fragmented UDP packet, for example, adding an extension header to the
unfragmentable part would go unnoticed (as the framented part would be
considered an exact duplicate) but make reassembly fail.
So do not allow updating the meta-data after we have seen the first
fragmented part anymore.
The frag6_20 test case is added which failed before triggering an
ICMPv6 "param prob" due to the check for each queued fragment for
a max-size violation if a fragoff=0 packet was received.
MFC after: 3 weeks
Sponsored by: Netflix
stat() of one of the remaining names of the file does not show an
updated ctime (inode modification time) until several seconds after
the unlink() completes. The problem only occurs when the filesystem
is running with soft updates enabled. When running with soft updates,
the ctime is not updated until the soft updates background process
has settled all the needed I/O operations.
This commit causes the ctime to be updated immediately during the
unlink(). A side effect of this change is that the ctime is updated
again when soft updates has finished its processing because that
is the time that is correct from the perspective of programs that
look at the disk (like dump). This change does not cause any extra
I/O to be done, it just ensures that stat() updates the ctime before
handing it back.
PR: 241373
Reported by: Alan Somers
Tested by: Alan Somers
MFC after: 3 days
Sponsored by: Netflix
While the comment was updated in r350746, the code was not.
RFC8200 says that unless fragment overlaps are exact (same fragment
twice) not only the current fragment but the entire reassembly queue
for this packet must be silently discarded, which we now do if
fragment offset and fragment length do not match.
Obtained from: jtl
MFC after: 3 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16850
When done with tests check that both the per-VNET and the global-fragmented-
packets-in-system counters are zero to make sure we do not leak counters or
queue entries.
This implies that for all test cases we either have to check for the ICMPv6
packet sent in case of TLL=0 expiry (if it is sent) or sleep at least long
enough for the TTL to expire for all packets (e.g., fragments where we do not
have the off=0 packet).
This also means that statistics are now updated to include all the expired
packets.
There are cases when we do not check for counters to be zero and this is
when testing VNET teardown to behave properly and not panic, when we are
intentionally leaving fragments in the system.
MFC after: 3 weeks
Sponsored by: Netflix
Add ficl words for isvirtualized
and move ficl inb and outb words to ficl/x86/sysdep.c
so can be shared by i386 and amd64
Reviewed by: imp bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22069
Similar to the system global counter also export the per-VNET counter
"frag6_nfragpackets" detailing the current number of fragment packets
in this VNET's reassembly queues.
The read-only counter is helpful for in-VNET statistical monitoring and
for test-cases.
MFC after: 3 weeks
Sponsored by: Netflix
In case the first fragmented part (off=0) arrives we check for the
maximum packet size for each fragmented part we already queued with the
addition of the unfragmentable part from the first one.
For one we do not have to enter the loop at all if this is the first
fragmented part to arrive, and we can skip the check.
Should we encounter an error case we send an ICMPv6 message for any
fragment exceeding the maximum length limit. While dequeueing the
original packet and freeing it, statistics were not updated and leaked
both the reassembly queue count for the fragment and the global
fragment count. Found by code inspection and confirmed by tightening
test cases checking more statistical and system counters.
While here properly wrap a line.
MFC after: 3 weeks
Sponsored by: Netflix
