type of a software- or hardware-generated hash held in the
mbuf.m_pkthdr.flowid field, and provide accessor macros to easily
clear, set, receive, and test for hash values. Some of these
constants correspond to RSS hash types, but we don't want to limit
ourselves to that, as a number of other hashing techniques are in
use on hardware supported by FreeBSD.
Mark the M_FLOWID flag as deprecated; I hope to remove this before
9.0, changing drivers and the stack over to using the new
M_HASHTYPEBITS, most likely to use M_HASHTYPE_OPAQUE as we don't yet
want to nail down the KPI for RSS key/bucket management for device
drivers.
MFC after: 3 days
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
Ignoring the parameter with the unknown options is unlikely to be what was
intended.
Example:
find -n .
Note that things like
find -n
already caused an exit, equivalent to "find" by itself.
hash install, etc. For now, these are arguments are unused, but as we add
RSS support, we will want to use hashes extracted from mbufs, rather than
manually calculated hashes of header fields, due to the expensive of the
software version of Toeplitz (and similar hashes).
Add notes that it would be nice to be able to pass mbufs into lookup
routines in pf(4), optimising firewall lookup in the same way, but the
code structure there doesn't facilitate that currently.
(In principle there is no reason this couldn't be MFCed -- the change
extends rather than modifies the KBI. However, it won't be useful without
other previous possibly less MFCable changes.)
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
for lookup. I missed its call to in_pcbbind() when preparing previous
patches, which would lead to a lock assertion failure (although problem
not an actual race condition due to global pcbinfo locks providing
required synchronisation -- in this particular case only). This change
adds the missing locking of the pcbhash lock.
(Existing comments in the ipdivert code question the need for using the
global hash to manage the namespace, as really it's a simple port
namespace and not an address/port namespace. Also, although in_pcbbind
is used to manage reservations, the hash tables aren't used for lookup.
It might be a good idea to make them use hashed lookup, or to use a
different reservation scheme.)
Reviewed by: bz
Reported by: Kristof Provost <kristof at sigsegv.be>
Sponsored by: Juniper Networks
checks for collision/non-collision properties in binding them. This
test would have identified a bug recently reported on current@
involding my disaggregation of the pcbinfo lock.
It would be nice if this test also exercised packet diversion and
injection, but that is for another day.
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
sending. What happens otherwise is that the sender splits all the
traffic into 32k chunks, while the receiver is waiting for the whole
packet. Then for a certain packet sizes, particularly 66607 bytes in
my case, the communication stucks to secondary is expecting to
read one chunk of 66607 bytes, while primary is sending two chunks
of 32768 bytes and third chunk of 1071. Probably due to TCP windowing
and buffering the final chunk gets stuck somewhere, so neither server
not client can make any progress.
This patch also protect from short reads, as according to the manual
page there are some cases when MSG_WAITALL can give less data than
expected.
MFC after: 3 days
Intel 4965 devices for example have HT40 on 2GHz completely disabled
but it is still supported for 5GHz. To handle that in sta mode we
need to check if we can "upgrade" to a HT40 channel after the
association, if that is not possible but we are still announcing
support to the remote side we are left with a very flabby connection.
Reviewed by: adrian
too. In that case don't fiddle with the seqno as drivers are supposed
to handle that.
Currently only the powersave feature does sent QoS-null-data frames
before and after a background scan which must be handled correctly. Due
to this being quite rare we don't fiddle around with starting of aggr
sessions.
1) do not print out an empty "search ", things do not like it.
2) the search list is not comma separated.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
probe requests at 1Mbps while being associated on a 5GHz channel. Sending
those at 6Mbps does work, so use that instead during a background scan.
This workaround allows us to re-enable background scan support for the
4965 adapters.
Also, just enabling one antenna on 5GHz results in better reception of
beacons:
test 00:26:5a:c6:14:1a 40 54M -71:-95 200 E WME HTCAP ATH
vs
test 00:26:5a:c6:14:1a 40 54M -92:-95 200 E WME HTCAP ATH
Due to roam:rssi thresholds set to 7 by default it might have been
impossible to associate to that network. While here use
IEEE80211_IS_CHAN_5GHZ() to determine the band.
- Add a retry loop for the i2c sensor reading.
- Check on busy status of the chip and on invalid values.
- Fix a typo in a comment.
- Replace the constant 2732 with the ZERO_C_TO_K macro.
Approved by: nwhitehorn (mentor)
signalled when the attribute address for the CF is 0 in the octeon
sysinfo structure. In this mode, the DATA port is 16-bits, but the
other ports are 8-bits, but on a 16-bit bus (so you have to access it
a short at a time, but only believe the lower byte). See the code for
more details on this slightly odd arrangement. I'm still not 100%
happy with the abstractions here on many levels (starting with the
globals for these settings, on down to no bus_space use, etc), but the
driver had these problems before the change.
Also, clean up the code a bit to make this support easier, and the
code a bit easier to read. I tried to follow existing style, but may
have missed a few spots. Add some comments.
Fix probe/attach routine to return a proper error for the simulator.
With this change, my EBH5200 eval board now recognizes the CF well
enough to boot to the login prompt. Before it would say it never
became ready. My CN3010-EVB-HS5 still boots properly. My older
CN3860-based board won't load the 64-bit kernel, either before or
after the change, and I didn't chase that down.
module.
* If sc->sc_dodfs is set to 1 by the ath_dfs_radar_enable(),
set the relevant rx filter bit to begin receiving radar PHY
errors. The HAL code already knows how to set the relevant
error mask register to enable radar events.
* Add a missing call to ath_dfs_radar_enable() after ath_hal_reset()
* change ath_dfs_process_phyerr() to take a const char *buf for now,
rather than a descriptor. This way it can get access to the packet
buffer contents.
pmap_sync_icache() to sync random (possibly uncached or nonexisting!)
memory, causing kernel page faults or machine checks, most easily
triggered by using GDB. While here, add an additional safeguard to only
sync cacheable memory.
MFC after: 2 days
doesn't return an error when the underlying file system
lacks support for any of the four _PC_xxx values used, by
falling back to default values.
Tested by: avg
MFC after: 2 weeks
real owner of the device ID. Also rename the associated config
function while here.
- Add support for the 2-port and 4-port Exar parts as well: Exar XR17C/D152
and Exar XR17C154.
Tested by: Mike Tancsa, Willy Offermans Willy of offermans rompen nl
MFC after: 1 week
- Add a retry loop for the i2c sensor reading.
- Update the sensor handling for sensors which do not have a location
entry. [1]
Submitted by: [1] Justin Hibbits.
Approved by: nwhitehorn (mentor)
It seems there have only been a small amount to the compiler-rt source
code in the mean time. I'd rather have the code in sync as much as
possible by the time we release 9.0. Changes:
- The libcompiler_rt library is now dual licensed under both the
University of Illinois "BSD-Like" license and the MIT license.
- Our local modifications for using .hidden instead of .private_extern
have been upstreamed, meaning our changes to lib/assembly.h can now be
reverted.
- A possible endless recursion in __modsi3() has been fixed.
- Support for ARM EABI has been added, but it has no effect on FreeBSD
(yet).
- The functions __udivmodsi4 and __divmodsi4 have been added.
Requested by: many, including bf@ and Pedro Giffuni
buffers. This fixes a segfault on exit due to calling free on a bogus pointer.
This should be considered a temporary stop gap fix to avoid the crash. The
complete fix re-shuffles the initializations of some of the clean-up pointers.
The details of the fix can be found in the libpcap git repository:
commit bc8209b71e928870b0f172d43b174ab27ba24394
Proded by: kevlo, rpaulo
MFC after: 2 weeks
Submitted by: Anton Yuzhaninov
in grotty(1). This makes it possible to view colorized manpages in
color.
When MANPAGER environment variable is set, use it instead of PAGER.
Why another environment variable, one might ask? With color output
enabled, both a terminal and a pager should support the ANSI color
escapes. On a supporting terminal, less(1) with option -R would be
such a pager, while "more -s" (the current default pager for man(1))
will show garbage. It means a different default pager is needed when
color output is enabled, but many people have PAGER set customary,
and it's unlikely to support ANSI color escapes, so introducing yet
another variable (MANPAGER) seemed like a good option to me:
- if MANPAGER is set, use that unconditionally;
- if you disable color support (it is by default), and don't set
MANPAGER, you get an old behavior: -P pager, $PAGER, "more -s",
in that order;
- if you enable color support (by setting MANCOLOR), and don't set
MANPAGER, we ignore PAGER which is unlikely to support ANSI color
escapes, and you get: -P pager, "less -Rs", in that order;
- you might have good reasons for different man(1) and general
purpose pagers;
- later versions of GNU man(1) support MANPAGER.
They are media-dependent and may change in run-time, same as sectorsize
and/or mediasize.
SCSI devices return physical sector size and offset via READ CAPACITY(16)
command and so can not report it until media inserted or at least until
probe sequence completed. UNMAP support is also reported there.
due to m_uiotombuf() failing.
While here, trim unneeded error handling related to tuninit() since it
can never fail.
Submitted by: Martin Birgmeier la5lbtyi aon at
Reviewed by: glebius
MFC after: 1 week
uses the .RP macro, a separate cover page is created as page 0 which
is not otherwise output. The bug was hiding by a hack in troffrc
that disables SGR support in grotty(1), which I'm going to remove now.
For POLA reasons, still disable SGR support in grotty(1), by passing
-P-c to groff(1). If we want SGR sequences in these documents, this
can be removed.
MFC after: 1 week
