Commit Graph

186622 Commits

Author SHA1 Message Date
Adrian Chadd
c445d2520d Use an RLOCK here instead of an RWLOCK - matching all the other calls
to lla_lookup().

This drastically reduces the very high lock contention when doing parallel
TCP throughput tests (> 1024 sockets) with IPv6.

Tested:

* parallel IPv6 TCP bulk data exchange, 8192 sockets

MFC after:	1 week
Sponsored by:	Netflix, Inc.
2014-01-01 00:56:26 +00:00
Xin LI
f4c8ba8370 MFV r259170:
4370 avoid transmitting holes during zfs send

4371 DMU code clean up

illumos/illumos-gate@43466aae47

NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.

MFC after:	2 weeks
2014-01-01 00:45:28 +00:00
Steve Kargl
1531aa5f6a * msun/man/cosh.3:
* msun/man/sinh.3:
* msun/man/tanh.3:
  . Fix grammar.

* msun/src/e_coshl.c:
* msun/src/e_sinhl.c:
  . Fix comment.

* msun/src/s_tanhl.c:
  . Remove unused variables.
  . Fix location/indentation of comments.
  . Use comparison involving ints instead of long double.
  . Re-order polynomial evaluation on ld128 for |x| < 0.25.
    For now, retain the older order in an "#if 0 ... #else" block.
  . Use int comparison to short-circuit the |x| < 1.5 condition.

Requested by:	bde
2013-12-31 23:59:33 +00:00
Xin LI
f86b34932a MFV r258972:
4373 add block contents print to zstreamdump

illumos/illumos-gate@994fb6b8a9

MFC after:	2 weeks
2013-12-31 21:37:24 +00:00
Xin LI
cca1e7c623 MFV r258385:
(Note: this change is not applicable to FreeBSD and the file
is not included in build.  It's integrated for completeness).

4128 disks in zpools never go away when pulled

illumos/illumos-gate@39cddb10a3

MFC after:	2 weeks
2013-12-31 21:24:00 +00:00
Xin LI
db2aff5f8b MFV r242733:
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man page
and help message

illumos/illumos-gate@31d7e8fa33

FreeBSD porting notes: the kernel part of this changeset depends
on Solaris buf(9S) interfaces and are not really applicable for
our use.  vdev_disk.c is patched as-is to reduce diverge from
upstream, but vdev_file.c is left intact.

MFC after:	2 weeks
2013-12-31 19:39:15 +00:00
Alan Cox
000fb817d8 Since the introduction of the popmap to reservations in r259999, there is
no longer any need for the page's PG_CACHED and PG_FREE flags to be set and
cleared while the free page queues lock is held.  Thus, vm_page_alloc(),
vm_page_alloc_contig(), and vm_page_alloc_freelist() can wait until after
the free page queues lock is released to clear the page's flags.  Moreover,
the PG_FREE flag can be retired.  Now that the reservation system no longer
uses it, its only uses are in a few assertions.  Eliminating these
assertions is no real loss.  Other assertions catch the same types of
misbehavior, like doubly freeing a page (see r260032) or dirtying a free
page (free pages are invalid and only valid pages can be dirtied).

Eliminate an unneeded variable from vm_page_alloc_contig().

Sponsored by:	EMC / Isilon Storage Division
2013-12-31 18:25:15 +00:00
Mark Johnston
0646c22afc Some DTrace tests (mostly in the pid provider directory) make use of
executable ksh scripts. These are currently not copied into the test
directory the way that compiled executables are, so the tests which make use
of them cannot work. This changes the test Makefile to copy the scripts into
the test directory.
2013-12-31 15:45:12 +00:00
Mark Johnston
b69b2ff588 Allocate the probe ID unrhdr before the DTrace kld_* event handlers are
registered. Otherwise there is a small window during which probe IDs may be
allocated before the unrhdr is allocated.

MFC after:	2 weeks
2013-12-31 15:41:16 +00:00
Mark Johnston
a333376bba Revert r260091. The vmem calls seem to be slower than the *_unr() calls that
they replaced, which is important considering that probe IDs are allocated
during process startup for USDT probes.
2013-12-31 15:37:51 +00:00
Glen Barber
b10852181e Bump copyright year.
Happy New Year 2014!

Sponsored by:	The FreeBSD Foundation
2013-12-31 12:18:10 +00:00
Alexander V. Chernikov
dbfdd46b70 Explicitly free rt_tables to please Coverity.
Reported by:	Coverity
Coverity CID:	1147174
MFC after:	2 weeks
2013-12-31 12:11:48 +00:00
Warner Losh
380ff59ab1 Add support for Samsung K9F2G08U0A (256MiB SLC) NAND found on some old
Atmel boards I have.

# All Samsung, Toshiba and SanDisk parts will need to be in this table
# since they don't conform to the ONFI specification (they are all Toggle
# parts). There's some standards for the additional bytes so there's some hope
# to decode them automatically on a per-vendor basis, but even that has
# problems (and is what motivated the ONFI parameter page).
2013-12-31 07:36:39 +00:00
Warner Losh
9520f95242 Delete echoed doesn't rub out the previous character, so always
use <backspace> <space> <backspace> instead. This fixes hitting
DELETE instead of BACKSPACE at mountroot> prompt.
2013-12-31 04:40:25 +00:00
Eric Davis
ae02949d11 For TSO, when the first mbuf contains both the packet header and data, the
header is split out into its own BD for processing by the firmware. When
this split occurred the data length in the BD was not being set correctly
resulting in packet corruption.

Approved by:	davidcd (mentor)
2013-12-30 23:02:26 +00:00
Dimitry Andric
bff60cf827 In sys/dev/sound/pci/maestro.c, #if 0 two unused static functions.
MFC after:	3 days
2013-12-30 22:17:33 +00:00
Dimitry Andric
ff96238951 For sys/ofed/drivers/infiniband/hw/mlx4/mcg.c, disable warning about
unused variables for now.

MFC after:	3 days
2013-12-30 22:14:31 +00:00
Xin LI
198f573526 Eliminate unused drbr_stats_update implementation in oce(4) driver.
Noticed by:	dim
MFC after:	2 weeks
2013-12-30 21:30:49 +00:00
Edward Tomasz Napierala
f0aa0e0e23 The devd part never got implemented; remove for now, until someone actually
needs this feature and can talk to me about how it should look like.

MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2013-12-30 21:06:08 +00:00
Edward Tomasz Napierala
3b6eb6baa2 Fix typo.
MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2013-12-30 21:04:24 +00:00
Dimitry Andric
d33c250878 For sys/ofed/drivers/infiniband/core/cm.c, disable warning about unused
functions for now.

MFC after:	3 days
2013-12-30 20:58:06 +00:00
Dimitry Andric
24da2fe3d0 In sys/amd64/amd64/pmap.c, remove static function pmap_is_current(),
which has been unused since r189415.

Reviewed by:	alc
MFC after:	3 days
2013-12-30 20:37:47 +00:00
Dimitry Andric
86390f9444 Similar to r260020, only use -fms-extensions with gcc, for all other
modules which require this flag to compile.  Use a GCC_MS_EXTENSIONS
variable, defined in kern.pre.mk, which can be used to easily supply the
flag (or not), depending on the compiler type.

MFC after:	3 days
2013-12-30 20:34:53 +00:00
Pedro F. Giffuni
1b9906c757 gcc: Fix issue with "unavailable" attribute.
While here, point where we dropped the support for objc from r260014.

MFC after:	3 weeks
2013-12-30 20:24:05 +00:00
Alexander Motin
f8fb069d47 Move most of NFS file handle affinity code out of the heavily congested
global RPC thread pool lock and protect it with own set of locks.

On synthetic benchmarks this improves peak NFS request rate by 40%.
2013-12-30 20:23:15 +00:00
Dimitry Andric
d5c1aaf2fb For sys/boot/i386 and sys/boot/pc98, separate flags to be passed
directly to the linker (LD_FLAGS) from flags passed indirectly, via the
compiler driver (LDFLAGS).

This is because several Makefiles under sys/boot/i386 and sys/boot/pc98
use ${LD} directly to link, and the normal LDFLAGS value should not be
used in these cases.

MFC after:	3 days
2013-12-30 19:05:50 +00:00
Warner Losh
6f4f8f233c Set the SoC name for the atmelbus name. 2013-12-30 18:10:04 +00:00
Warner Losh
871bdaab53 Allow AT91_MCI_ALLOW_OVERCLOCK to be an option in kernel config files. 2013-12-30 18:07:50 +00:00
Mark Johnston
b9c04b396a Now that vmem(9) is available, use vmem arenas to allocate probe and
aggregation IDs, as is done in the upstream illumos code. This still
requires some FreeBSD-specific code, as our vmem API is not identical to the
one in illumos.

Submitted by:	Mike Ma <mikemandarine@gmail.com>
2013-12-30 17:37:32 +00:00
Steve Kargl
36af656535 Fix a mismerge of my local doc changes to msun/man/sinh.3. 2013-12-30 17:11:36 +00:00
Kirk McKusick
be1fd82346 Fine tune filesystem block allocations under low free-space
conditions (-r254995) based on further operational experience.

Submitted by:  Dmitry Sivachenko
Fix Tested by: Dmitry Sivachenko
MFC after: 2 weeks
2013-12-30 17:04:24 +00:00
Scott Long
9ccde11826 getopt returns an int, not a char, so use the correct data type for
the return value. Fixes powerpc tinderbox.

MFC after:	2 days
2013-12-30 16:49:31 +00:00
Marius Strobl
e0c758686c - Probe with BUS_PROBE_DEFAULT instead of 0.
- Remove clearing PCIM_CMD_INTxDIS; pci(4) will do that as appropriate since
  r189367.

MFC after:	1 week
2013-12-30 16:46:50 +00:00
Edward Tomasz Napierala
68ca2e2ebb Fix extremely slow operation with data digests enabled. This was caused
by receive code waiting for data digest even when the data segment was
empty.  It didn't actually read it, but it waited until those four bytes
become available in the socket buffer, i.e. until any other PDU (such as NOP)
came in.

PR:		kern/185240
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2013-12-30 12:18:06 +00:00
Rui Paulo
3dc8dee92e Add netpfil to CSCOPEDIRS. 2013-12-30 08:36:17 +00:00
Kirk McKusick
9cd7cb1bf1 Properly handle unsigned comparison.
MFC after: 2 weeks
2013-12-30 06:19:42 +00:00
Scott Long
443b507745 Add globs.c, missed in r260068,260069
Submitted by:	peter
Obtained from:	Netflix
MFC after:	3 Days
2013-12-30 05:02:57 +00:00
Pedro F. Giffuni
fdcd8bc639 gcc: small diff reduction wrt gcc43 and Apple GCC.
Obtained from:	gcc 4.3 (rev. 121464, 122528, 124106; GPLv2)
MFC after:	3 weeks
2013-12-30 02:52:43 +00:00
Scott Long
1a8959dac6 Multi-queue NIC drivers and multi-port lagg tend to use the same lower
bits of the flowid as each other, resulting in a poor distribution of
packets among queues in certain cases.  Work around this by adding a
set of sysctls for controlling a bit-shift on the flowid when doing
multi-port aggrigation in lagg and lacp.  By default, lagg/lacp will
now use bits 16 and higher instead of 0 and higher.

Reviewed by:	max
Obtained from:	Netflix
MFC after:	3 days
2013-12-30 01:32:17 +00:00
Scott Long
9a2fcb2e6b Add globs.c to the build now that it's a separate file.
Reviewed by:	max
Obtained from:	Netflix
MFC after:	3 days
2013-12-30 01:17:05 +00:00
Scott Long
7703a6ff27 Add the -R option to allow fsck_ffs to restart itself when too many critical
errors have been detected in a particular run.

Clean up the global state variables so that a restart can happen correctly.

Separate the global variables in fsck_ffs and fsdb to their own file.  This
fixes header sharing with fscd.

Correctly initialize, static-ize, and remove global variables as needed in
dir.c.  This fixes a problem with lost+found directories that was causing
a segfault.

Correctly initialize, static-ize, and remove global variables as needed in
suj.c.

Initialize the suj globals before allocating the disk object, not after.
Also ensure that 'preen' mode doesn't conflict with 'restart' mode

Submitted by:	scottl, max
Reviewed by:	max, mckusick (earlier version)
Obtained from:	Netflix
MFC after:	3 days
2013-12-30 01:16:08 +00:00
Steve Kargl
a48e1f224c * Makefile:
. Hook coshl, sinhl, and tanhl into libm.
  . Create symbolic links for corresponding manpages.
  . While here remove a nearby extraneous space.

* Symbol.map:
* src/math.h:
  . Move coshl, sinhl, and tanhl to their proper locations.

* man/cosh.3:
* man/sinh.3:
* man/tanh.3:
  . Update the manpages.

* src/e_cosh.c:
* src/e_sinh.c:
* src/s_tanh.c:
  . Add weak reference for LBDL_MANT_DIG==53 targets.

* src/imprecise.c:
  . Remove the coshl, sinhl, and tanhl kludge.

* src/e_coshl.c:
  . ld80 and ld128 implementation of coshl().

* src/e_sinhl.c:
  . ld80 and ld128 implementation of sinhl().

* src/s_tanhl.c:
  . ld80 and ld128 implementation of tanhl().

Obtained from:	bde (mostly), das and kargl
2013-12-30 01:06:21 +00:00
Steve Kargl
5f63fbd67f * ld80/k_expl.h:
* ld128/k_expl.h:
  . Split out a computational kernel,__k_expl(x, &hi, &lo, &k) from expl(x).
    x must be finite and not tiny or huge.  The kernel returns hi and lo
    values for extra precision and an exponent k for a 2**k scale factor.
  . Define additional kernels k_hexpl() and hexpl() that include a 1/2
    scaling and are used by the hyperbolic functions.

* ld80/s_expl.c:
* ld128/s_expl.c:
  . Use the __k_expl() kernel.

Obtained from:	bde
2013-12-30 00:51:25 +00:00
Marius Strobl
da67681dd3 - Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 23:46:59 +00:00
Marius Strobl
0a9d883977 - Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 23:05:01 +00:00
Marius Strobl
66168a0428 - Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Nuke dupe $FreeBSD$.

MFC after:	1 week
2013-12-29 22:56:05 +00:00
Marius Strobl
97db2528ed - Add support for using MSI instead of INTx, controllable via the tunable
hw.ral.msi_disable (defaulting to using MSI).
- Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Release resources again in case attaching fails.
- Quiesce the interrupt before detaching.
- Sprinkle const.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Trim headers.
- Nuke dupe $FreeBSD$.

MFC after:	1 week
2013-12-29 22:43:14 +00:00
Gleb Smirnoff
9706c950a2 Fix couple of bugs from r257692 related to scan of address list on
an interface:
- in in_control() skip over not AF_INET addresses.
- in in_aifaddr_ioctl() and in_difaddr_ioctl() do correct check
  of address family, w/o accessing memory beyond struct ifaddr.

Sponsored by:	Nginx, Inc.
2013-12-29 22:20:06 +00:00
Scott Long
56dc4e726b Add the '-b' flag to 'camcontrol devlist'. This prints only the existing
buses and their parent sims, useful for creating a sim->bus->device map.

Obtained from:	Netflix
MFC after:	3 days
2013-12-29 20:48:47 +00:00
Marius Strobl
e6ebfc7ca9 - Remove a redundant variable in mpt_pci_attach().
- #if 0 the currently unused paired port linking and unlinking of dual
  adapters.
- Simplify MSI/MSI-X allocation and release. For a single one, we don't need
  to fiddle with the MSI/MSI-X count and pci_release_msi(9) is smart enough
  to just do nothing in case of INTx.
- Canonicalize actions taken on attach failure and detach.
- Remove the remainder of incomplete support for older FreeBSD versions.

MFC after:	1 week
2013-12-29 20:41:32 +00:00