Commit Graph

975 Commits

Author SHA1 Message Date
manu
c976945339 arm64: rockchip: rk805: Switch to iicdev_{readfrom,writeto}
This simpify the code a bit.
2019-10-01 18:30:06 +00:00
alc
b5c0c1bef3 In short, pmap_enter_quick_locked("user space", ..., VM_PROT_READ) doesn't
work.  More precisely, it doesn't set ATTR_AP(ATTR_AP_USER) in the page
table entry, so any attempt to read from the mapped page by user space
generates a page fault.  This problem has gone unnoticed because the page
fault handler, vm_fault(), will ultimately call pmap_enter(), which
replaces the non-working page table entry with one that has
ATTR_AP(ATTR_AP_USER) set.

This change reduces the number of page faults during a "buildworld" by
about 19.4%.

Reviewed by:	andrew, markj
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D21841
2019-10-01 15:33:47 +00:00
manu
57d7210f04 arm64: rockchip: rk_clk_pll: Check mode on recalc
If the pll is in slow or deep slow mode return the correct frequency.
2019-09-30 15:01:09 +00:00
manu
ad9caa60bb arm64: rockchip: correct reset value
If bit is 0 the reset is not asserted.
Also register our self as a reset provider, this was commented
in r352850

Reported by:	mmel
2019-09-30 15:00:22 +00:00
manu
c1ed6afbc4 arm64: rockchip: Add usb2phy driver
This driver is for the usb phy present on rockchip SoC.
It only support RK3399 and host mode for now.
The driver expose the usb clock needed by the usb controller.
2019-09-28 22:25:21 +00:00
manu
156f684147 arm64: rockchip: Fix map_gpio
The map_gpio function wasn't correct, the first element is the pin
and not the phandle.
2019-09-28 22:21:16 +00:00
manu
d3d27ce52f arm64: rockchip: Implement resets
Module resets where not implemented when rockchip clocks were commited.
Implement them.
Since all resets registers are contiguous a driver only need to give
the start offset and the number of resets. This avoid to have to declare
every resets.
2019-09-28 22:19:52 +00:00
manu
6e39845513 arm64: rockchip: rk3399: Add usb2 clocks 2019-09-28 22:17:26 +00:00
alc
fe710b3242 Eliminate redundant calls to critical_enter() and critical_exit() from
pmap_update_entry().  It suffices that interrupts are blocked.

Reviewed by:	andrew, markj
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D21753
2019-09-28 17:16:03 +00:00
markj
d130e737a2 Implement pmap_page_is_mapped() correctly on arm64 and riscv.
We must also check for large mappings.  pmap_page_is_mapped() is
mostly used in assertions, so the problem was not very noticeable.

Reviewed by:	alc
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D21824
2019-09-27 23:37:01 +00:00
kib
957270782d Improve MD page fault handlers.
Centralize calculation of signal and ucode delivered on unhandled page
fault in new function vm_fault_trap().  MD trap_pfault() now almost
always uses the signal numbers and error codes calculated in
consistent MI way.

This introduces the protection fault compatibility sysctls to all
non-x86 architectures which did not have that bug, but apparently they
were already much more wrong in selecting delivered signals on
protection violations.

Change the delivered signal for accesses to mapped area after the
backing object was truncated.  According to POSIX description for
mmap(2):
   The system shall always zero-fill any partial page at the end of an
   object. Further, the system shall never write out any modified
   portions of the last page of an object which are beyond its
   end. References within the address range starting at pa and
   continuing for len bytes to whole pages following the end of an
   object shall result in delivery of a SIGBUS signal.

   An implementation may generate SIGBUS signals when a reference
   would cause an error in the mapped object, such as out-of-space
   condition.
Adjust according to the description, keeping the existing
compatibility code for SIGSEGV/SIGBUS on protection failures.

For situations where kernel cannot handle page fault due to resource
limit enforcement, SIGBUS with a new error code BUS_OBJERR is
delivered.  Also, provide a new error code SEGV_PKUERR for SIGSEGV on
amd64 due to protection key access violation.

vm_fault_hold() is renamed to vm_fault().  Fixed some nits in
trap_pfault()s like mis-interpreting Mach errors as errnos.  Removed
unneeded truncations of the fault addresses reported by hardware.

PR:	211924
Reviewed by:	alc
Discussed with:	jilles, markj
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Differential revision:	https://reviews.freebsd.org/D21566
2019-09-27 18:43:36 +00:00
kevans
199eacdc01 sysent: regenerate after r352693 2019-09-25 17:30:28 +00:00
markj
fbe7e9c7e4 Complete the removal of the "wire_count" field from struct vm_page.
Convert all remaining references to that field to "ref_count" and update
comments accordingly.  No functional change intended.

Reviewed by:	alc, kib
Sponsored by:	Intel, Netflix
Differential Revision:	https://reviews.freebsd.org/D21768
2019-09-25 16:11:35 +00:00
alc
1629aaf0f7 In case a translation fault on the kernel address space occurs from
within a critical section, we must perform a lock-free check on the
faulting address.

Reported by:	andrew
Reviewed by:	andrew, markj
X-MFC with:	r350579
Differential Revision:	https://reviews.freebsd.org/D21685
2019-09-21 19:51:57 +00:00
markj
3616760326 Revert r352406, which contained changes I didn't intend to commit. 2019-09-16 15:04:45 +00:00
markj
543f9366b9 Fix a couple of nits in r352110.
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.

Reported by:	alc
Reviewed by:	alc, kib
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D21639
2019-09-16 15:03:12 +00:00
br
7ebcf07f42 Add support for Intel Stratix 10 platform.
Intel Stratix 10 SoC includes a quad-core arm64 cluster and FPGA fabric.

This adds support for reconfiguring FPGA.

Accessing FPGA core of this SoC require the level of privilege EL3,
while kernel runs in EL1 (lower) level of privilege.

This provides an Intel service layer interface that uses SMCCC to pass
queries to the secure-monitor (EL3).

Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D21454
2019-09-13 16:50:57 +00:00
emaste
673399d81f Update comments and ordering in linux*_dummy.c
- sort alphabetically
- getcpu arrived in Linux 2.6.19
- fanotify_* arrived in 2.6.36
2019-09-11 17:56:48 +00:00
emaste
22e36b3874 linuxulator: add stub arm64 linux_genassym.c
This will be fleshed out in the future but allows us to build the arm64
linuxulator using the same infrastructure as x86.
2019-09-11 17:29:44 +00:00
emaste
bc0ee42672 linuxulator: memfd_create first appeared in Linux 3.17
Reference: http://man7.org/linux/man-pages/man2/memfd_create.2.html
2019-09-11 17:05:49 +00:00
emaste
142a3d6513 linuxulator: seccomp syscall first appeared in Linux 3.17
Reference: http://man7.org/linux/man-pages/man2/seccomp.2.html
2019-09-11 17:04:13 +00:00
emaste
c1fe73ee39 linux: add trivial renameat2 implementation
Just return EINVAL if flags != 0.  The Linux man page documents one
case of EINVAL as "The filesystem does not support one of the flags in
flags."

After r351723 userland binaries will try using new system calls.

Reported by:	mjg
Reviewed by:	mjg, trasz
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D21590
2019-09-11 13:01:59 +00:00
emaste
89195b1af4 regen linuxulator sysent after r352208 2019-09-11 12:58:53 +00:00
emaste
d50f11cc69 make linux_renameat2 args consistent with linux_renameat
Use 'dfd' consistently for a directory fd.
2019-09-11 12:58:06 +00:00
markj
ccbfa8304f Change synchonization rules for vm_page reference counting.
There are several mechanisms by which a vm_page reference is held,
preventing the page from being freed back to the page allocator.  In
particular, holding the page's object lock is sufficient to prevent the
page from being freed; holding the busy lock or a wiring is sufficent as
well.  These references are protected by the page lock, which must
therefore be acquired for many per-page operations.  This results in
false sharing since the page locks are external to the vm_page
structures themselves and each lock protects multiple structures.

Transition to using an atomically updated per-page reference counter.
The object's reference is counted using a flag bit in the counter.  A
second flag bit is used to atomically block new references via
pmap_extract_and_hold() while removing managed mappings of a page.
Thus, the reference count of a page is guaranteed not to increase if the
page is unbusied, unmapped, and the object's write lock is held.  As
a consequence of this, the page lock no longer protects a page's
identity; operations which move pages between objects are now
synchronized solely by the objects' locks.

The vm_page_wire() and vm_page_unwire() KPIs are changed.  The former
requires that either the object lock or the busy lock is held.  The
latter no longer has a return value and may free the page if it releases
the last reference to that page.  vm_page_unwire_noq() behaves the same
as before; the caller is responsible for checking its return value and
freeing or enqueuing the page as appropriate.  vm_page_wire_mapped() is
introduced for use in pmap_extract_and_hold().  It fails if the page is
concurrently being unmapped, typically triggering a fallback to the
fault handler.  vm_page_wire() no longer requires the page lock and
vm_page_unwire() now internally acquires the page lock when releasing
the last wiring of a page (since the page lock still protects a page's
queue state).  In particular, synchronization details are no longer
leaked into the caller.

The change excises the page lock from several frequently executed code
paths.  In particular, vm_object_terminate() no longer bounces between
page locks as it releases an object's pages, and direct I/O and
sendfile(SF_NOCACHE) completions no longer require the page lock.  In
these latter cases we now get linear scalability in the common scenario
where different threads are operating on different files.

__FreeBSD_version is bumped.  The DRM ports have been updated to
accomodate the KPI changes.

Reviewed by:	jeff (earlier version)
Tested by:	gallatin (earlier version), pho
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D20486
2019-09-09 21:32:42 +00:00
br
44aa9c9fa3 Include dwgpio to the build.
Sponsored by:	DARPA, AFRL
2019-09-04 15:55:44 +00:00
kib
d33fdaeb7e Centralize __pcpu definitions.
Many extern struct pcpu <something>__pcpu declarations were
copied/pasted in sources.  The issue is that the definition is MD, but
it cannot be provided by machine/pcpu.h due to actual struct pcpu
defined in sys/pcpu.h later than the inclusion of machine/pcpu.h.
This forced the copying when other code needed direct access to
__pcpu.  There is no way around it, due to machine/pcpu.h supplying
part of struct pcpu fields.

To work around the problem, add a new machine/pcpu_aux.h header, which
should fill any needed MD definitions after struct pcpu definition is
completed. This allows to remove copies of __pcpu spread around the
source.  Also on x86 it makes it possible to remove work arounds like
OFFSETOF_CURTHREAD or clang specific warnings supressions.

Reported and tested by:	lwhsu, bcran
Reviewed by:	imp, markj (previous version)
Discussed with:	jhb
Sponsored by:	The FreeBSD Foundation
Differential revision:	https://reviews.freebsd.org/D21418
2019-08-29 07:25:27 +00:00
manu
c8ec5294de arm64: rk3399: pinctrl: Add gpio banks and fix iomux
Since r351187 the pinctrl driver need to know the gpio bank as it
directly attach the gpio driver to handle some setup that might
be present in the dts, add the gpio banks table for rk3399.
While here fix some IOMUX definition that prevented to boot
on RK3399 as pinctrl wasn't configured correctly.

Submitted by:	mmel (original version)
MFC after:	2 weeks
MFC With:	r351187
2019-08-27 18:00:01 +00:00
manu
19ba879ed0 arm64: rk3328: pinctrl: Add gpio banks and fix iomux
Since r351187 the pinctrl driver need to know the gpio bank as it
directly attach the gpio driver to handle some setup that might
be present in the dts, add the gpio banks table for rk3328.
While here fix some IOMUX definition that prevented to boot
on RK3328 as pinctrl wasn't configured correctly.

Submitted by:	mmel (original version)
MFC after:	2 weeks
MFC With:	r351187
2019-08-27 17:59:09 +00:00
mmel
773a8248cc Add support for RK3288 into existing RockChip drivers.
This patch ensures only minimal level of compatibility necessary to boot
on RK3288 based boards. GPIO and pinctrl interaction, missing in current
implementation, will be improved by own patch in the near future.

MFC after:	2 weeks
MFC with:	r351452
2019-08-27 09:20:01 +00:00
tuexen
31a2cbb52a Identify eMAG CPU used in Ampere Computing systems.
Reviewed by:		emaste@
MFC after:		1 week
Differential Revision:	https://reviews.freebsd.org/D21314
2019-08-26 16:12:14 +00:00
mmel
16f50c36fb Improve rk_pinctrl driver:
- add support for 'output-low', 'output-high', 'output-low' and
  'output-enable' properties. These are use in RK3288 DT files
- add support for RK3288
- to reduce overall file size, use local macros for initialization
  of pinctrl description structures.

MFC after:	2 weeks
2019-08-18 09:19:33 +00:00
mmel
59a1d217f4 Improve rk_i2c driver:
- Properly handle IIC_M_NOSTOP and IIC_M_NOSTART flags.
- add polling mode, so driver can be used even if interrupts are not
  enabled (this is necessary for proper support of PMICs).
- add support for RK3288

MFC after:	2 weeks
2019-08-18 09:11:43 +00:00
manu
ffea06a831 arm64: Add EspressoBin DTB to the build
This will compile the espressobin dts to a dtb file and this will be
install in /boot/dtb/marvell/ during installkernel.

MFC after:	1 week
2019-08-16 21:11:43 +00:00
emaste
271bf7a789 aarch64: make pmap_change_attr public like on other platforms
Submitted by:	Greg V <greg@unrelenting.technology>
Reviewed by:	markj
Differential Revision:	https://reviews.freebsd.org/D20787
2019-08-16 18:21:31 +00:00
jeff
685a292036 Move phys_avail definition into MI code. It is consumed in the MI layer and
doing so adds more flexibility with less redundant code.

Reviewed by:	jhb, markj, kib
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D21250
2019-08-16 00:45:14 +00:00
imp
6a103b76a4 ukbdmap.h rule was identical on all platforms, so move them into sys/conf/files.
This allows us to remove 'nodevice ukbd' from the arm64 NOTES file.
2019-08-12 23:25:14 +00:00
imp
75e675195a Floppy driver really only works on x86
Move the floppy driver to the x86 specific notes file.

Reviewed by: jhb, manu, jhibbits, emaste
Differential Revision: https://reviews.freebsd.org/D21208
2019-08-12 22:58:50 +00:00
imp
c0702cb45a Move sc out of the global file
x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it from powerpc LINT. It's not in daily use there, and the intent is to
100% switch to vt now that it works for that platform to limit support burden.

All the other architectures omit some or all of the screen savers from their
lint config. Move them to the x86 NOTES files and remove the exclusions. This
reduces slightly the number of savers sparc64 compiles, but since they are in
GENERIC, the overage is adequate and if someone reaelly wants to sort them out
in sparc64 they can sweat the details and the testing.

Reviewed by: jhb (earlier version), manu (earlier version), jhibbits
Differential Revision: https://reviews.freebsd.org/D21233
2019-08-12 22:58:44 +00:00
imp
02386873bc First pass at a LINT for arm64.
Create a rough and ready NOTES file from GENERIC, remove the duplication from
sys/conf/NOTES and add relevant no* directives to make this compile.

Reviewed by: jhb, manu (earlier versions that differed only in comments)
Differential Revision: https://reviews.freebsd.org/D21184
2019-08-08 17:55:19 +00:00
imp
33b1fa4d64 Make arm64 32-bit mode compile with COMPAT_43
The COMPAT_43 option isn't quite like the other compat options, and arm64 makes
attempts to support it in 64-bit mode. In 32-bit compat mode, however, two
syscall implementations that COMPAT_FREEBSD32 assumes will be there are
missing. Provide implementations for these: ofreebsd32_sigreturn (which we'll
never encounter, so implement it as nosys as is done in kern_sig.c) and
ofreebsd32_getpagesize, where we'll always return 4096 since that's the only
PAGE_SIZE we support, similar to how the ia32 implementation does things.

Reviewed by: manu@
Differential Revision: https://reviews.freebsd.org/D21192
2019-08-08 17:48:07 +00:00
alc
6632123aea Ordinarily, during a superpage promotion or demotion within a pmap, the
pmap's lock ensures that other operations on the pmap don't observe the
old mapping being broken before the new mapping is established.  However,
pmap_kextract() doesn't acquire the kernel pmap's lock, so it may observe
the broken mapping.  And, if it does, it returns an incorrect result.

This revision implements a lock-free solution to this problem in
pmap_update_entry() and pmap_kextract() because pmap_kextract() can't
acquire the kernel pmap's lock.

Reported by:	andrew, greg_unrelenting.technology
Reviewed by:	andrew, markj
Tested by:	greg_unrelenting.technology
X-MFC with:	r350579
Differential Revision:	https://reviews.freebsd.org/D21169
2019-08-08 06:26:34 +00:00
alc
0b7fe37f61 Enable superpage promotion within the kernel pmap.
Reviewed by:	markj
X-MFC after:	r350004
Differential Revision:	https://reviews.freebsd.org/D21149
2019-08-05 02:44:04 +00:00
alc
e5a877a071 Because of AArch64's weak memory consistency model, we need to include a
memory barrier between the stores for initializing a page table page and
the store for adding that page to the page table.  Otherwise, a page table
walk by another processor's MMU could see the page table page before it
sees the initialized entries.

Simplify pmap_growkernel().  In particular, eliminate an unnecessary TLB
invalidation.

Reviewed by:	andrew, markj
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D21126
2019-08-02 22:36:42 +00:00
markj
db972bc38e Use ATTR_DBM even when hardware dirty bit management is not enabled.
The ARMv8 reference manual only states that the bit is reserved in
this case; following Linux's example, use it instead of a
software-defined bit for the purpose of indicating that a managed
mapping is writable.

Reviewed by:	alc, andrew
MFC after:	r350004
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D21121
2019-08-01 22:48:06 +00:00
alc
58ae190bd3 In pmap_advise(), when we encounter a superpage mapping, we first demote the
mapping and then destroy one of the 4 KB page mappings so that there is a
potential trigger for repromotion.  Currently, we destroy the first 4 KB
page mapping that falls within the (current) superpage mapping or the
virtual address range [sva, eva).  However, I have found empirically that
destroying the last 4 KB mapping produces slightly better results,
specifically, more promotions and fewer failed promotion attempts.
Accordingly, this revision changes pmap_advise() to destroy the last 4 KB
page mapping.  It also replaces some nearby uses of boolean_t with bool.

Reviewed by:	kib, markj
Differential Revision:	https://reviews.freebsd.org/D21115
2019-07-31 05:38:39 +00:00
emaste
0c969d5f36 linuxulator: rename linux_locore.s to .asm
It is assembled using "${CC} -x assembler-with-cpp", which by convention
(bsd.suffixes.mk) uses the .asm extension.

This is a portion of the review referenced below (D18344).  That review
also renamed linux_support.s to .S, but that is a functional change
(using the compiler's integrated assembler instead of as) and will be
revisited separately.

MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D18344
2019-07-30 17:18:31 +00:00
br
4eedc99e90 Add support for the SD/MMC controller found in Terasic DE10-Pro
(an Intel Stratix 10 GX/SX FPGA Development Kit).

Set the bus speed manually due to lack of clock management support.

Sponsored by:	DARPA, AFRL
2019-07-30 12:51:14 +00:00
markj
97200858d0 Have arm64's pmap_fault() handle WnR faults on dirty PTEs.
If we take a WnR permission fault on a managed, writeable and dirty
PTE, simply return success without calling the main fault handler.  This
situation can occur if multiple threads simultaneously access a clean
writeable mapping and trigger WnR faults; losers of the race to mark the
PTE dirty would end up calling the main fault handler, which had no work
to do.

Reported by:	alc
Reviewed by:	alc
MFC with:	r350004
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D21097
2019-07-29 21:21:53 +00:00
markj
468883bcb0 Remove an unneeded trunc_page() in pmap_fault().
Reported by:	alc
MFC with:	r350004
Sponsored by:	The FreeBSD Foundation
2019-07-29 20:31:28 +00:00