Terasic DE10-Pro (an Intel Stratix 10 GX/SX FPGA Development Kit).
The Altera EMAC is an instance of Synopsys DesignWare Gigabit MAC.
This driver sets correct clock range for MDIO interface on Intel Stratix 10
platform.
This is required due to lack of support for clock manager device for
this platform that could tell us the clock frequency value for ethernet
clock domain.
Sponsored by: DARPA, AFRL
if a demotion succeeds, then all of the 4KB page mappings within the
superpage-sized region must be valid, so there is no point in testing the
validity of the 4KB page mapping that is going to be write protected.
Deindent the nearby code.
Reviewed by: kib, markj
Tested by: pho (amd64, i386)
X-MFC after: r350004 (this change depends on arm64 dirty bit emulation)
Differential Revision: https://reviews.freebsd.org/D21027
Previously only some of the ID register fields were 64 bit. To allow
for a script to generate these mark them all 64 bit. To allow for their
use in assembly we need to use the UINT64_C macro via a new UL macro
to stop the lines from being too long.
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20977
we should test ATTR_SW_DBM, not ATTR_AP_RW, to determine whether to set
PGA_WRITEABLE. In effect, we are currently setting PGA_WRITEABLE based on
whether the dirty bit is preset, not whether the mapping is writeable.
Correct this mistake.
Reviewed by: markj
X-MFC with: r350004
Differential Revision: https://reviews.freebsd.org/D21013
where the page table entry was previously invalid. (Note that I did not
replace pmap_load_store() when it was followed by a TLB invalidation, even
if we are not using the return value from pmap_load_store().)
Correct an error in pmap_enter(). A test for determining when to set
PGA_WRITEABLE was always true, even if the mapping was read only.
In pmap_enter_l2(), when replacing an empty kernel page table page by a
superpage mapping, clear the old l2 entry and issue a TLB invalidation. My
reading of the ARM architecture manual leads me to believe that the TLB
could hold an intermediate entry referencing the empty kernel page table
page even though it contains no valid mappings.
Replace a couple direct uses of atomic_clear_64() by the new
pmap_clear_bits().
In a couple comments, replace the term "paging-structure caches", which is
an Intel-specific term for the caches that hold intermediate entries in the
page table, with wording that is more consistent with the ARM architecture
manual.
Reviewed by: markj
X-MFC after: r350004
Differential Revision: https://reviews.freebsd.org/D20998
Add HWCAP support for arm64.
defines are the same as in Linux and a userland program can use
elf_aux_info to get the data.
We only save the common denominator for all cores in case the
big and little cluster have different support (this is known to
exists even if we don't support those SoCs in FreeBSD)
Differential Revision: https://reviews.freebsd.org/D17137
r350004 added most of the machinery needed to support hardware DBM
management, but it did not intend to actually enable use of the hardware
DBM bit.
Reviewed by: andrew
MFC with: r350004
Sponsored by: The FreeBSD Foundation
After r349117 and r349122, some mapping attribute changes do not trigger
superpage demotion. However, pmap_demote_l2() was not updated to ensure
that the replacement L3 entries carry any attribute changes that
occurred since promotion.
Reported and tested by: manu
Reviewed by: alc
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20965
syscallret() doesn't use error anymore. Fix a few other places to permit
removing the return value from syscallenter() entirely.
- Remove a duplicated assertion from arm's syscall().
- Use td_errno for amd64_syscall_ret_flush_l1d.
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D2090
Previously the arm64 pmap did no reference or modification tracking;
all mappings were treated as referenced and all read-write mappings
were treated as dirty. This change implements software management
of these attributes.
Dirty bit management is implemented to emulate ARMv8.1's optional
hardware dirty bit modifier management, following a suggestion from alc.
In particular, a mapping with ATTR_SW_DBM set is logically writeable and
is dirty if the ATTR_AP_RW_BIT bit is clear. Mappings with
ATTR_AP_RW_BIT set are write-protected, and a write access will trigger
a permission fault. pmap_fault() handles permission faults for such
mappings and marks the page dirty by clearing ATTR_AP_RW_BIT, thus
mapping the page read-write.
Reviewed by: alc
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20907
TLB entry. Specifically, at the start of pmap_enter_quick_locked(), we
would sometimes have a TLB entry for an invalid PTE, and we would need to
issue a TLB invalidation before exiting pmap_enter_quick_locked(). However,
we should never have a TLB entry for an invalid PTE. r349905 has addressed
the root cause of the problem, and so we no longer need this workaround.
X-MFC after: r349905
Casueword(9) on ll/sc architectures must be prepared for userspace
constantly modifying the same cache line as containing the CAS word,
and not loop infinitely. Otherwise, rogue userspace livelocks the
kernel.
To fix the issue, change casueword(9) interface to return new value 1
indicating that either comparision or store failed, instead of relying
on the oldval == *oldvalp comparison. The primitive no longer retries
the operation if it failed spuriously. Modify callers of
casueword(9), all in kern_umtx.c, to handle retries, and react to
stops and requests to terminate between retries.
On x86, despite cmpxchg should not return spurious failures, we can
take advantage of the new interface and just return PSL.ZF.
Reviewed by: andrew (arm64, previous version), markj
Tested by: pho
Reported by: https://xenbits.xen.org/xsa/advisory-295.txt
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D20772
- Check for ATTR_SW_MANAGED before anything else.
- Use pmap_pte_dirty() in pmap_remove_pages().
No functional change intended.
Reviewed by: alc
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
register values" of the architecture manual, an isb instruction should be
executed after updating ttbr0_el1 and before invalidating the TLB. The
lack of this instruction in pmap_activate() appears to be the reason why
andrew@ and I have observed an unexpected TLB entry for an invalid PTE on
entry to pmap_enter_quick_locked(). Thus, we should now be able to revert
the workaround committed in r349442.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20904
of pmap_load_clear(), in places where we don't care about the page table
entry's prior contents.
Eliminate an unnecessary pmap_load() from pmap_remove_all(). Instead, use
the value returned by the pmap_load_clear() on the very next line. (In the
future, when we support "hardware dirty bit management", using the value
from the pmap_load() rather than the pmap_load_clear() would have actually
been an error because the dirty bit could potentially change between the
pmap_load() and the pmap_load_clear().)
A KASSERT() in pmap_enter(), which originated in the amd64 pmap, was meant
to check the value returned by the pmap_load_clear() on the previous line.
However, we were ignoring the value returned by the pmap_load_clear(), and
so the KASSERT() was not serving its intended purpose. Use the value
returned by the pmap_load_clear() in the KASSERT().
MFC after: 2 weeks
The hold_count and wire_count fields of struct vm_page are separate
reference counters with similar semantics. The remaining essential
differences are that holds are not counted as a reference with respect
to LRU, and holds have an implicit free-on-last unhold semantic whereas
vm_page_unwire() callers must explicitly determine whether to free the
page once the last reference to the page is released.
This change removes the KPIs which directly manipulate hold_count.
Functions such as vm_fault_quick_hold_pages() now return wired pages
instead. Since r328977 the overhead of maintaining LRU for wired pages
is lower, and in many cases vm_fault_quick_hold_pages() callers would
swap holds for wirings on the returned pages anyway, so with this change
we remove a number of page lock acquisitions.
No functional change is intended. __FreeBSD_version is bumped.
Reviewed by: alc, kib
Discussed with: jeff
Discussed with: jhb, np (cxgbe)
Tested by: pho (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19247
1. Use _pmap_alloc_l3() instead of pmap_alloc_l3() in order to handle the
possibility that a superpage mapping for "va" was created while we slept.
(This is derived from the amd64 version.)
2. Eliminate code for allocating kernel page table pages. Kernel page
table pages are preallocated by pmap_growkernel().
3. Eliminate duplicated unlock operations when KERN_RESOURCE_SHORTAGE is
returned.
MFC after: 2 weeks
restructure cache_handle_range so that all of the data cache operations are
performed before any instruction cache operations. Then, we only need one
barrier between the data and instruction cache operations and one barrier
after the instruction cache operations.
On an Amazon EC2 a1.2xlarge instance, this simple change reduces the time
for a "make -j8 buildworld" by 9%.
Reviewed by: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20848
copy the VFP registers.
arvm7 VFP uses 32 64bits fp registers (but those could be used in pairs to
make 16 128bits registers), while aarch64 uses 32 128bits fp registers, so
we have to copy the value of each register.
that replaced a pmap_invalidate_page() with a dsb(ishst) in
pmap_enter_quick_locked(). Even though this change is in principle
correct, I am seeing occasional, spurious bus errors that are only
reproducible without this pmap_invalidate_page(). (None of adding an
isb, "upgrading" the dsb to wait on loads as well as stores, or
disabling superpage mappings eliminates the bus errors.) Add an XXX
comment explaining why the pmap_invalidate_page() is being performed.
Discussed with: andrew, markj
In set_regs32()/fill_regs32(), we have to get/set SP and LR from/to
tf_x[13] and tf_x[14].
set_regs() and fill_regs() may be called for a 32bits process, if the process
is ptrace'd from a 64bits debugger. So, in set_regs() and fill_regs(), get
or set PC and SPSR from where the debugger expects it, from tf_x[15] and
tf_x[16].
Print warnings for some bad kernel configurations (like NUMA disabled
with multiple domains). Check and report some firmware errors (like
incorrect proximity domain entries).
Differential Revision: https://reviews.freebsd.org/D20416
We now support multiple ITS blocks raising interrupts to a CPU.
Add all available CPUs to the ITS when no NUMA information is
available.
This reverts the check added in r340602, at that tim we did not
suppport multiple ITS blocks for a CPU.
Differential Revision: https://reviews.freebsd.org/D20417
Now that GICV3_IVAR_REDIST is available, GICV3_IVAR_REDIST_VADDR
is unused and can be removed. Drop the define and add a comment.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D20454
perform a TLB invalidation. A barrier suffices. (See r343876.)
Add a comment to pmap_enter_quick_locked() in order to highlight the
fact that it does not replace valid mappings.
Correct a typo in one of pmap_enter()'s comments.
MFC after: 1 week
(1) pmap_remove(), where it eliminates redundant TLB invalidations by
pmap_remove() and pmap_remove_l3(), and (2) pmap_enter_l2(), where it may
optimize the TLB invalidations by batching them.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12725
Implement wiring changes on superpage mappings. Previously, a superpage
mapping was unconditionally demoted by pmap_unwire(), even if the wiring
change applied to the entire superpage mapping.
Rewrite a comment to use the arm64 names for bits in a page table entry.
Previously, the bits were referred to by their x86 names.
Use atomic_"op"_64() instead of atomic_"op"_long() to update a page table
entry in order to match the prevailing style in this file.
MFC after: 10 days
Implement protection changes on superpage mappings. Previously, a superpage
mapping was unconditionally demoted by pmap_protect(), even if the
protection change applied to the entire superpage mapping.
Precompute the bit mask describing the protection changes rather than
recomputing it for every page table entry that is changed.
Skip page table entries that already have the requested protection changes
in place.
Reviewed by: andrew, kib
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D20657
it only called vm_page_dirty() on the first of the superpage's constituent
4KB pages. This revision corrects that error, calling vm_page_dirty() on
all of superpage's constituent 4KB pages.
MFC after: 3 days
I just happenned to have 3rd party code using 'var' as the output variable
which drew my attention to this. variables defined inside macros should be
prefixed to avoid getting shadowed varable wanrings from clang.
not performed directly by the pmap. Instead, they are performed by
vm_page_free_pages_toq(). (This is the same approach that we use on x86.)
Reviewed by: kib, markj
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D20627
demotion failure. Otherwise, some callers to pmap_demote_l2_locked(), such
as pmap_protect(), may leave an incorrect mapping in place on a demotion
failure.
Change pmap_demote_l2_locked() so that it handles addresses that are not
superpage aligned. Some callers to pmap_demote_l2_locked(), such as
pmap_protect(), may not pass a superpage aligned address.
Change pmap_enter_l2() so that it correctly calls vm_page_free_pages_toq().
The arm64 pmap is updating the count of wired pages when freeing page table
pages, so pmap_enter_l2() should pass false to vm_page_free_pages_toq().
Optimize TLB invalidation in pmap_remove_l2().
Reviewed by: kib, markj (an earlier version)
Discussed with: andrew
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20585
Hide unused code under #ifdef notyet (in one case the only caller is under
that same ifdef), or if it is arm (not arm64) specific code under the
__arm__ ifdef to not yield -Wunused-function warnings during the arm64
kernel compile.
MFC after: 2 weeks
The A3700 has a different GPIO controller and thus, do not use the old (and
shared) code for Marvell.
The pinctrl driver, also part of the controller, is not supported yet (but
the implementation should be straightforward).
Sponsored by: Rubicon Communications, LLC (Netgate)
previously addressed in r348246.
This pmap problem also exists on arm64 and riscv. However, the original
solution developed for amd64 and i386 cannot be used on arm64 and riscv. In
particular, arm64 and riscv do not define a PG_PROMOTED flag in their level
2 PTEs. (A PG_PROMOTED flag makes no sense on arm64, where unlike x86 or
riscv we are required to break the old 4KB mappings before making the 2MB
mapping; and on riscv there are no unused bits in the PTE to define a
PG_PROMOTED flag.)
This commit implements an alternative solution that can be used on all four
architectures. Moreover, this solution has two other advantages. First, on
older AMD processors that required the Erratum 383 workaround, it is less
costly. Specifically, it avoids unnecessary calls to pmap_fill_ptp() on a
superpage demotion. Second, it enables the elimination of some calls to
pagezero() in pmap_kernel_remove_{l2,pde}().
In addition, remove a related stale comment from pmap_enter_{l2,pde}().
Reviewed by: kib, markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20538
syscalls.conf is included using "." which per the Open Group:
If file does not contain a <slash>, the shell shall use the search
path specified by PATH to find the directory containing file.
POSIX shells don't fall back to the current working directory.
Submitted by: Nathaniel Wesley Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20476
The initialization required for LPIs (setting up pending tables etc.)
has to be done just once per CPU, even in the case where there are
multiple ITS blocks associated with the CPU.
Add a flag lpi_enabled in the per-cpu distributor info for this and
use it to ensure that we call its_init_cpu_lpi() just once.
This enables us to support platforms where multiple GIC ITS blocks
can generate LPIs to a CPU.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19844
Move the per-cpu LPI intialization to a separate function. This is
in preparation for a commit that does LPI init only once for a CPU,
even when there are multiple ITS blocks associated with the CPU.
No functional changes in this commit.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19843
Update 'struct gic_redists' to consolidate all per-cpu redistributor
information into a new 'struct redist_pcpu'. Provide a new interface
(GICV3_IVAR_REDIST) for the GIC driver, which can be used to retrieve
the per-cpu data.
This per-cpu redistributor struct will be later used to improve the
GIC ITS setup.
While there, remove some unused fields in gic_v3_var.h interface.
No functional changes.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19842
acpi_config_intr() will be called when an arm64 system booted with ACPI.
We do the interrupt mapping for ACPI interrupts in nexus_acpi_map_intr()
on arm64, so acpi_config_intr() has to just return success without
printing this error message.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19432
Similar to r348026, exhaustive search for uses of CTRn() and cross reference
ktr.h includes. Where it was obvious that an OS compat header of some kind
included ktr.h indirectly, .c files were left alone. Some of these files
clearly got ktr.h via header pollution in some scenarios, or tinderbox would
not be passing prior to this revision, but go ahead and explicitly include it
in files using it anyway.
Like r348026, these CUs did not show up in tinderbox as missing the include.
Reported by: peterj (arm64/mp_machdep.c)
X-MFC-With: r347984
Sponsored by: Dell EMC Isilon
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
cpufunc, in terms of __builtin_ffs and the like, for arm64
architectures, and use those, rather than the simple libkern
implementations, in building arm64 kernels.
Tested by: greg_unrelenting.technology (earlier version)
Reviewed by: alc
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D20250
In all practical situations, the resolver visibility is static.
Requested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: so (emaste)
Differential revision: https://reviews.freebsd.org/D20281
of them listed in opt_global.h which is not generated while building
modules outside of a kernel and such modules never match real cofigured
kernel.
So, we should prevent our users from building obviously defective modules.
Therefore, remove the root cause of the building of modules outside of a
kernel - the possibility of building modules with DEBUG or KTR flags.
And remove all of DEBUG printfs as it is incomplete and in threaded
programms not informative, also a half of system call does not have DEBUG
printf. For debuging Linux programms we have dtrace, ktr and ktrace ability.
PR: 222861
Reviewed by: trasz
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20178
We used to put every PLL in normal mode (meaning that the output would
be the result of the PLL configuration) instead of slow mode (the output
is equal to the external oscillator frequency, 24-26Mhz) but this doesn't
work for most of the PLLs as when we put them into normal mode the registers
configuring the output frequency haven't been set.
Add a normal_mode member in clk_pll_def/clk_pll_sc struct and if it's true
we then set the PLL to normal mode.
For now only set it to the LPLL and BPLL (Little cluster PLL and Big cluster
PLL respectively).
Reviewed by: ganbold
Differential Revision: https://reviews.freebsd.org/D20174
Having IPSEC compiled into the kernel imposes a non-trivial
performance penalty on multi-threaded workloads due to IPSEC
refcounting. In my benchmarks of multi-threaded UDP
transmit (connected sockets), I've seen a roughly 20% performance
penalty when the IPSEC option is included in the kernel (16.8Mpps
vs 13.8Mpps with 32 senders on a 14 core / 28 HTT Xeon
2697v3)). This is largely due to key_addref() incrementing and
decrementing an atomic reference count on the default
policy. This cause all CPUs to stall on the same cacheline, as it
bounces between different CPUs.
Given that relatively few users use ipsec, and that it can be
loaded as a module, it seems reasonable to ask those users to
load the ipsec module so as to avoid imposing this penalty on the
GENERIC kernel. Its my hope that this will make FreeBSD look
better in "out of the box" benchmark comparisons with other
operating systems.
Many thanks to ae for fixing auto-loading of ipsec.ko when
ifconfig tries to configure ipsec, and to cy for volunteering
to ensure the the racoon ports will load the ipsec.ko module
Reviewed by: cem, cy, delphij, gnn, jhb, jpaetzel
Differential Revision: https://reviews.freebsd.org/D20163
Ampere eMAG systems have XHCI just described in ACPI, not on PCI.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19986
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
Equivalent to r339958 for sys/kern/syscalls.master.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14858
move bits that are MI out into the headers in compat/linux.
For that remove bogus _packed attribute from struct l_sockaddr
and use MI types for struct members.
And continue to move into the linux_common module a code that is
intended for both Linuxulator modules (both instruction set - 32 & 64 bit)
or for external modules like linsysfs or linprocfs.
To avoid header pollution introduce new sys/compat/linux_common.h header.
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20137
Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749.
Reviewed by: imp, jhb, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20120
Some UEFI implementations trash this register and, as we use it as a
platform register, the kernel doesn't save it before calling into the UEFI
runtime services. As we have a copy in tpidr_el1 restore from there when
exiting the EFI environment.
PR: 237234, 237055
Reviewed by: manu
Tested On: Ampere eMAG
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Sponsored by: Ampere Computing (hardware)
Differential Revision: https://reviews.freebsd.org/D20127
After latest binding update, this patch enables usage of
the switch on Armada 3720 EspressoBin, so compile it
by default with arm64 GENERIC.
A patch was extracted from https://reviews.freebsd.org/D19036
Submitted by: Bert JW Regeer <xistence@0x58.com>
Reviewed by: manu
The nexus module was missing method for releasing bus resources. As a
result, it couldn't be released and the bus_release_resource() call would
return ENXIO.
Next call to bus_alloc_resource() for the same resource was returning
error, because it wasn't released previously and it was still busy.
The implementation of the nexus_release_resource() is the same as for
arm architecture.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Reported-by: Greg V <greg@unrelenting.technology>
Tested-by: cperciva, Greg V <greg@unrelenting.technology>
Obtained from: Semihalf
MFC after: 2 weeks
Sponsored by: Amazon, Inc.
Differential revision: https://reviews.freebsd.org/D19641
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
In all of the architectures we have today, we always use PAGE_SIZE.
While in theory one could define different things, none of the
current architectures do, even the ones that have transitioned from
32-bit to 64-bit like i386 and arm. Some ancient mips binaries on
other systems used 8k instead of 4k, but we don't support running
those and likely never will due to their age and obscurity.
Reviewed by: imp (who also contributed the commit message)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19280
The plls frequency are now correctly calculated in fractional mode
and integer mode.
While here add some debug printfs (disabled by default)
Tested with powerd on the little cluster on a RockPro64.
MFC after: 1 week
This allows us to limit the number of CPUs to use, e.g. to debug problems
seen when enabling multiple clusters.
Reviewed by: manu
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19404
Marvell XHCI is in fact generic-xhci, so move the driver and
add the compatible string.
While here, get and enable the phy if the dtb provide one.
The xhci bindings state that phys should be in a 'phys' property but
Marvell DTS uses 'usb-phy', only add support for 'usb-phy' for now.
Sponsored-by: Rubicon Communications, LCC ("Netgate")
Remove the mode_val from the clock definition as it's a bit unreadable.
Use mode_shift to represent which bit control the mode in the register.
Simplify some case where we can avoid a register read before changing it.
Set the PLL back to normal mode after the PLL have stabilized.
Discussed with: mmel
MFC after: 1 week
No map function was provided before so every regulator lookup resolved
the regulator with id 1, as it uses the default mapper, which is wrong.
Correctly map the regulators.
While here remove some debug printfs and make them disable by default.
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here, when switching PLL frequency, first switch it to slow mode.
When set to slow mode the PLL clock will be the external oscillator.
Changing the PLL parameters while its output is used can cause hang (sometimes).
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here set the parent after changing its freqeuncy, this reduce the time
between changing the parent and changing the divider for the arm clock.
MFC after: 1 week
RockChip clocks register have a write mask in the upper 16 bits, if a 1
is present the corresponding bit in the lower 16 ones is set.
Use this instead of always setting the mask to 0xFFFF0000.
This avoids a read of the register.
While here add some debug printf useful for debuging clock problems
MFC after: 1 week
