All of them are needed to be able to boot to single user and be able
to repair a existing FreeBSD installation so put them directly into
FreeBSD-runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21503
This code has been written as a proof of concept, but I think that it
can be useful in general. It allows to set the status of an enclosure
slot. Practically, this means controlling whatever slot status LEDs the
enclosure provides. At present, the new command does not have sanity
checks or any conveniences. That means that it is possible to issue the
command for an invalid slot and an enclosure. But the worst I have seen
happening is either the command failing or simply being ignored. Also,
at the moment, the status has to be specified as a numeric bit mask.
The bit definitions can be found in sys/dev/mps/mpi/mpi2_init.h, they
are prefixed with MPI2_SEP_REQ_SLOTSTATUS_. The only way to address a
slot is by the enclosure handle and the slot number. Both are readily
available from mpsutil show commands.
So, future enhancements could include alternative ways to address a slot
(e.g., by a disk handle or a disk device name) and human friendly names
for slot statuses.
The new command is useful alternative to 'sas2ircu locate' command.
First, sas2ircu is a proprietary blob. Second, it supports setting only
locate / identify status bit.
Tested on HP H220 running LSI IT firmware 20.x.
Reviewed by: bapt
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20535
This patch fixes a bug that made the mixer command enter
an infinite loop when instructed to set the value of a device
to an empty string (e.g., `mixer vol ""`).
Additionally, some tests for mixer(8) are being added.
PR: 240039
Reviewed by: hselasky, mav
Approved by: src (hselasky, mav)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21409
After populating the filesystem, write a FSInfo block with
proper information.
Reviewed by: emaste, cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21363
There is no need to duplicate this file when it can be trivially
shared (just exposing sections previously under #ifdef _KERNEL).
MFC with: r351273
Differential Revision: The FreeBSD Foundation
There is no reason to duplicate this file when it can be trivially
shared (just exposing one section previously under #ifdef _KERNEL).
Reviewed by: imp, cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21346
(The kernel uses caddr_t.)
Suggested by: cem
Reviewed by: cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21348
Add FAT support to makefs by copying some files from sys/fs/msdosfs/ and
updating others with changes from NetBSD.
The six files copied from sys/fs/msdosfs at r348251 and modified are:
denode.h direntry.h fat.h msdosfs_fat.c msdosfs_lookup.c msdosfsmount.h
I would prefer to avoid the duplication, but reluctance to doing so was
expressed in a previous review (D11197); for now copy the files and
revisit in the future.
Submitted by: Siva Mahadevan
Discussed with: cem, imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16438
Apparently using tty for this purpose has been deprecated since 4.4 Lite.
Reviewed by: cy
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D21318
Revision 316342, which introduced the anticongestion feature, failed to
consider that the periodic scripts are executed by a recursive invocation of
periodic. The recursive invocation wrongly cleaned up a temporary file that
should've been cleaned up only by the original invocation. The result is
that if the first script that requests an anticongestion sleep runs after
the security scripts, the sleep won't happen.
Fix this bug by delaying cleanup until the end of the original invocation.
PR: 236564
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
Reviewed by: imp
MFC after: 1 month
When local support was fixed, it introduced a minor bug in formatting. We don't
increment the lpos by enouogh, so lines are a little too long. Adjust to be
correct now with variable length srcprefix.
Inizialize global variables earlier in the process. It doesn't matter today, but
may in the future if we want to access these lists earlier in config's run.
mkheaders.c hasn't made headers in ~15 years. Belatedly update the comments to
reflect that all it does these days is warn about 'device foo' lines in the
config where we don't know what a 'foo' is.
Remove extra includes too. These also haven't been needed for 15 years and
weren't removed at the time the comment wasn't updated...
Follow-up on r322318 and r322319 and remove the deprecated modules.
Shift some now-unused kernel files into userspace utilities that incorporate
them. Remove references to removed GEOM classes in userspace utilities.
Reviewed by: imp (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21249
rcmds removed in r324351.
Historical references in the README are maintained. There's a paragraph
describing a "980K crunched 'fixit'" that references rsh and rlogin.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Since YP protocol definition uses the constant to declare
variable-size opaque byte strings, the change should be binary
compatible with existing installations which do not expose keys or
values larger than 1024 bytes.
All uses of local variables with YPMAXRECORD sizes were removed to
avoid insane stack use. On the other hand, variables with static
lifetime should be fine and only result in increased VA use.
Glibc made same change, increasing the allowed length for keys and
values in YP to 16M, in 2013.
Reviewed by: markj
Discussed with: ian
Sponsored by: Mellanox Technologies
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D20900
Summary:
autounmountd(8) uses doubles to handle mount time durations. However,
it must convert to integer types, time_t in particular, to do anything
meaningful. Additionally, even though it's a floating-point value in
seconds, the sub-seconds component is never used, so it's unnecessary.
Switching type to time_t fixes an assertion on powerpc64, which checks
that a sleep value that's not -1.0 is greater than 0. On powerpc64, it
happens that the value of -1.0 gets loaded as a float (perhaps a bug in
gcc), but gets compared to a double. This compares as false, so follows
through the 'sleep != -1.0' path, and fails the assert. Since the
sub-second component isn't used in the double, just drop it and deal
with whole-integer seconds.
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D21109
When transmitting a large TCP packet, the final transmit descriptor
includes the length of the protocol headers to be duplicated on each
segment. The device model was trusting the guest-supplied value
without validating it. A value of zero would result in the guest
being able to indirect a garbage pointer on the stack to overwrite
arbitrary memory in the bhyve process. A value that was non-zero but
too small for the requested parameters resulted in the device model
reading and writing values beyond the end of the on-stack buffer used
to hold the template header.
To fix, validate the supplied length and drop requests to transmit
packets that would overflow the header buffer. While here, initialize
the header pointer to NULL as a preventive measure so that any access
to an unallocated template header crashes they hypervisor
deterministically.
While here, only read the TCP sequence number if the packet being
split is a TCP packet. The e1000 logic supports a segmentation of UDP
frames, and while UDP segmentation requires this part of the header to
be valid (so there is no buffer overflow), only reading the field when
needed is cleaner.
admbugs: 918
Reported by: Reno Robert <renorobert@gmail.com>
Reviewed by: markj
Approved by: so
Security: CVE-2019-5609
The values to report can be set via LUN options. It can be useful for
testing, and also required for Drive Maintenance 2016 feature set.
MFC after: 2 weeks
Add appropriate bounds checks on the epid and streamid fields in the
device doorbell registers.
admbugs: 919
Submitted by: jhb
Reported by: Reno Robert <renorobert@gmail.com>
Reviewed by: markj
Approved by: so
Security: out-of-bounds read
This option was imported as part of the KAME project in r62627 (in 2000).
It was turned on unconditionally in r121472 (in 2003) and has been on ever
since. The old alternative code has bitrotted. Reap the dead code.
Reported by: Ján Sučan <jansucan@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20938
Move the bluetooth related files from FreeBSD-runtime to a new package named
FreeBSD-bluetooth
The FreeBSD runtime is only intended to have everything for a working
FreeBSD installation and bluetooth isn't needed for that.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20959
Move the hostapd related files from FreeBSD-runtime to a new package n
FreeBSD-hostapd
The FreeBSD runtime is only intended to have everything for a working
FreeBSD installation and hostapd isn't needed for that.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20958
Move the wpa related files from FreeBSD-runtime to a new package named
FreeBSD-wpa
The FreeBSD runtime is only intended to have everything for a working
FreeBSD installation and wpa isn't needed for that.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20957
zone.tab is deprecated. Install zone1970.tab alongside it, and use it
for tzsetup(8). This is also useful for other applications that need
the modern better maintained file.
Reviewed by: philip
Approved by: allanjude (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20646
Instead of skipping the NVMe Completion Queue update based on the
opcode, define a synthetic status value which indicates the completion
queue entry is invalid. This will also allow deferred completion queue
updates for other commands.
Also returns the correct status for unrecognized opcodes ("invalid
opcode").
Reviewed by: imp, jhb, araujo
Approved by: imp (mentor), jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20945
this implicitly by encoding it in a number space.
No functional change intended.
This is done as a preparation to add support for ICMPv6 mesages
indicating a parameter problem related to the next header.
MFC after: 2 weeks
We remove IPSEC only in parts of the tree, and not others. RELEASE_CRUNCH to
disable it has not kept up with all its uses. Remove it. Should there be a real
need to disable IPSEC, one that hasn't shown up in the base system to date,
it can be re-added behind a WITHOUT_IPSEC build option.
Since these things are more completely controlled by the MK_OPENSSL knob, remove
RELEASE_CRUNCH here. It's no longer needed for the release and other users can
use the more proper knob if they so desire.
Accept an IEEE Extended Unique Identifier (EUI-64) from the command
line for each NVMe namespace. If one isn't provided, it will create one
based on the CRC16 of:
- the FreeBSD IEEE OUI
- PCI bus, device/slot, function values
- Namespace ID
Reviewed by: imp, araujo, jhb, rgrimes
Approved by: imp (mentor), jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19905
The RELEASE_CRUNCH ifdefs save about 100 bytes of text space. The
complexity is not worth it as they eliminate error messages.
Left the RELEASE_CRUNCH ifdef to eliminate a lot of stuff in place.
That saves an interesting amount of space and change some behaviors,
so absent a more detailed analysis, maintain the status quo.
Follow-up work to improve the handling of unsupported/invalid opcodes
is being developed by chuck@.
Coverity CID: 1398928
Reviewed by: chuck
Approved by: araujo, imp
Differential Revision: https://reviews.freebsd.org/D20914
This is a no-op initialization because nothing reads this value. "This
wasn't wrong previously, but this is more correct now." -imp
Coverity CID: 1194307
Approved by: markj, imp, scottl
Differential Revision: https://reviews.freebsd.org/D20921
Also update to use strsep(3) instead of strtok(3).
Most of this commit inadvertently ended up in r349914.
Coverity CID: 1357337
Approved by: markj
PR: 233038
Differential Revision: https://reviews.freebsd.org/D20918
In 2011, r218961 removed local code for rotating logs in favor of using the
rotate_log command in etc/rc.d/accounting. If the accounting service is
activated then subsequently de-activated in rc.conf but still remains active
in periodic.conf, then you get an error message every day in the periodic
jobs about being unable to rotate the logs.
With this change to use "onerotate_log", the log rotation will happen the
first time periodic daily runs after accounting was disabled but periodic
accounting was left enabled. After that happens once, the /var/account/acct
will no longer exist, which results in a different path through the periodic
code and no more error messages will appear (unless daily_show_badconfig is
set, in which case the admin will be told that periodic security processing
is enabled but the accounting file is not present).
This is only a partial fix for the problems reported in PR 202203.
PR: 202203
Bhyve can currently emulate two virtual NICs, namely virtio-net and e1000,
and connect to the host network through two backends, namely tap and netmap.
However, there is no interface between virtual NIC functionalities and
backend functionalities. As a result, the backend code is duplicated between
the two virtual NIC implementations and also within the same virtual NIC.
Also, e1000 cannot currently use netmap as a backend.
This patch introduces a network backend API between virtio-net/e1000 and
tap/netmap, to improve code reuse and add missing functionalities.
Virtual NICs and backends can negotiate virtio-net features, such as checksum
offload and TSO. If the backend supports the features, it will propagate this
information to the guest, so that the latter can make use of them. Currently,
only netmap VALE ports support the features, but support should be added to
tap in the future.
Reviewed by: jhb, bryanv
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20659
Use the proper size_t type to match strlen's return type. This is not
exploitable in practice as this parses command line arguments, which
are limited to well below 2^31 bytes.
This is a minimal change to address the reported issue; hda_parse_config
and the rest of this file will benefit from further review.
Reported by: Fakhri Zulkifli
Reviewed by: jhb, markj
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
For strings without quotes and escapes dstptr and srcptr are equal, so
zeroing *dstptr before checking *srcptr is not a good idea. In practice
it means that in -maproot=65534:65533 everything after the colon is lost.
The problem was there since r293305, but before r346976 it was covered by
improper strsep_quote() usage.
PR: 238725
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Add the PCI HDAudio device model from the 2016 GSoC. Detailed information
can be found at
https://wiki.freebsd.org/SummerOfCode2016/HDAudioEmulationForBhyve
This commit has evolved from the original work to include Capsicum
integration. As part of that, it only opens the host audio devices once
and leaves them open, instead of opening and closing them on each guest
access. Thanks to Peter Grehan and Marcelo Araujo for their help in
bringing the work forward and providing some of the final techncial push.
Submitted by: Alex Teaca <iateaca@freebsd.org>
Differential Revision: D7840, D12419
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
can be found at
https://wiki.freebsd.org/SummerOfCode2016/HDAudioEmulationForBhyve
This commit has evolved from the original work to include Capsicum
integration. As part of that, it only opens the host audio devices once
and leaves them open, instead of opening and closing them on each guest
access. Thanks to Peter Grehan and Marcelo Araujo for their help in
bringing the work forward and providing some of the final techncial push.
Submitted by: Alex Teaca <iateaca@freebsd.org>
Differential Revision: D7840, D12419
The seg_max value reported to the guest should be two less than the
host's maximum, in order to leave room for the request and the
response. This is analogous to r347033 for virtio_block.
We hit the "too many segments to enqueue" assertion on OneFS because
we increase MAXPHYS to 256 KB.
Reviewed by: bryanv
Discussed with: cem jhb rgrimes
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20529
bsnmpd(1) main does that early on init and the connection is available
to all loaded modules
Event: Vienna Hackathon 2019
PR: 233431 , 221487
MFC after: 2 weeks
Otherwise duplicate messages can trigger a reinitialization of the
compression stream while the update thread is running. Also ensure
that the stream is initialized before the update thread may attempt
to use it.
PR: 238333
Reviewed by: cem, rgrimes
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20673
The vsc_rx_ready and the RX virtqueue is protected by the rx_mtx lock.
However, pci_vtnet_ping_rxq() (currently called only once after each
device reset) accesses those without acquiring the lock.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20609
can be combined with configuring the period and duty cycle (the same ioctl
sets all 3 values at once, so there's no reason to require the user to run
the program twice to get all 3 things set).
The driver now names its cdev nodes pwmcX.Y where X is unit number and
Y is the channel within that unit. Change the default device name from
pwmc0 to pwmc0.0. The driver now puts cdev files and label aliases in
the /dev/pwm directory, so allow the user to provide unqualified names
with -f and automatically prepend the /dev/pwm part for them.
Update the examples in the manpage to show the new device name format
and location within /dev/pwm.
ioctl definitions and related datatypes that allow userland control of pwm
hardware via the pwmc device. The new name and location better reflects its
assocation with a single device driver.
Both virtio_net and e82545 network frontends have code to validate and
generate MAC addresses. These functionalities are replicated in the two
files, so we move them in a separate compilation unit.
Reviewed by: rgrimes, bryanv, imp, kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20626
The VirtIO standard supports two schemes for notification suppression:
a notification enable bit and a more sophisticated one (event_idx) that
also supports delayed notifications. Currently bhyve fully supports
only the first scheme. This patch hides the notification suppression
internals by means of two inline routines, vq_kick_enable() and
vq_kick_disable(), and makes the code more readable.
Moreover, further improve readability by replacing the call to mb()
with a call to atomic_thread_fence_seq_cst(), which is already used
in virtio.c
Reviewed by: pmooney_pfmooney.com, bryanv
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20581
On vtnet device reset it is necessary to wait for threads to stop TX and
RX processing. However, the rx_in_progress variable (used for to wait for
RX processing to stop) is actually useless, and can be removed. Acquiring
and releasing the RX lock is enough to synchronize correctly. Moreover,
it is possible to reset the device while holding both TX and RX locks, so
that the "resetting" variable becomes unnecessary for the RX thread, and
can be protected by the TX lock (instead of being volatile).
Reviewed by: jhb, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20543
The NVMe CAM driver reports the PCIe Link Capability and Status for
devices. For emulated bhyve NVMe devices, this looks like:
nda0: nvme version 1.3 x63 (max x63) lanes PCIe Gen15 (max Gen15) link
The driver outputs this because the emulated device doesn't include the
PCIe Capability structure. The NVMe specification requires these
registers, so the fix is to add this set of capability registers to the
emulated device.
Note that PCI Express devices that are integrated into the Root Complex
(i.e. Bus 0x0) do not have to support the Link Capability or Status
registers. Windows will fail to start (i.e. Code 10) devices that appear
to be part of the Root Complex but report being a PCI Express Endpoint.
So also add a check to pci_emul_add_pciecap() to check if the device is
integrated and change the device type.
Reviewed by: imp, ken, araujo, jhb, rgrimes
Approved by: imp (mentor), ken (mentor), jhb (maintainer)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19904
This ensures that bhyve properly recognizes when decoding is disabled
for BARs on passthru devices. To properly handle writes to the
register, export a pci_emul_cmd_changed function from pci_emul.c that
the pass through device model invokes for config writes that change
PCIR_COMMAND.
Reviewed by: rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20531
Rather than uncoditionally setting the MEMEN and PORTEN bits in
PCIR_COMMAND for PCI devices, set the respective bit when the first
BAR of a given type is added to the device. This more closely matches
what firmware does on bare metal.
BUSMASTEREN is still set unconditionally. Eventually this bit should
move into the device models as not all device models need this set.
Reviewed by: rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20530
Coverity warned about gdb_write_mem sign extending the result of
parse_byte shifted left by 24 bits when generating a 32-bit memory
write value for MMIO. Simplify the code by using parse_integer
instead of unrolled parse_byte calls.
CID: 1401600
Reviewed by: cem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20508
bhyve has to virtualize the MSI-X table to trap reads and writes to
that table and map those to virtual interrupts that it maps real host
interrupts on to. For the pending-bit-array (PBA), bhyve passes
accesses from the guest directly to the hardware.
bhyve's virtualization of the MSI-X table is done by intercepting all
reads and writes to the BAR holding the MSI-X table. However, if the
PBA is stored in the same BAR as the MSI-X table, accesses to the PBA
portion of this BAR have to be forwarded to the real BAR.
However, in the case that the PBA was stored in a separate BAR and
it's offset in that separate BAR overlapped with the portion of the
MSI-X table BAR that the table used, the handlers for the table BAR
would incorrectly think that some accesses were PBA reads and writes.
This caused a crash in bhyve when it indirected a NULL pointer. Fix
this case by never trying to handle PBA access if the PBA lives in a
separate BAR.
Reported by: gallatin
Tested by: gallatin
Reviewed by: markj, Patrick Mooney
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20523
I believe this was introduced in the original '-r' commit, r231911 (2012).
At the time, the scope was limited to a 1 second sleep. r332518 (2018)
added '-R', which increased the potential duration of the affected interval
(from 1 to N seconds) by permitting arbitrary restart intervals.
Instead, handle SIGTERM normally during restart-sleep, when the monitored
process is not running, and shut down promptly.
(I noticed this behavior when debugging a child process that exited quickly
under the 'daemon -r -R 30' environment. 'kill <daemonpid>' had no
immediate effect and the monitor process slept until the next restart
attempt. This was annoying.)
Reviewed by: allanjude, imp, markj
Differential Revision: https://reviews.freebsd.org/D20509
Without this patch, mountd would delete/load all exports from the exports
file(s) when it receives a SIGHUP. This works fine for small exports file(s),
but can take several seconds to do when there are large numbers (10000+) of
exported file systems. Most of this time is spent doing the system calls
that delete/export each of these file systems. When the "-S" option
has been specified (the default these days), the nfsd threads are suspended
for several seconds while the reload is done.
This patch changes mountd so that it only does system calls for file systems
where the exports have been changed/added/deleted as compared to the exports
done for the previous load/reload of the exports file(s).
Basically, when SIGHUP is posted to mountd, it saves the exportlist structures
from the previous load and creates a new set of structures from the current
exports file(s). Then it compares the current with the previous and only does
system calls for cases that have been changed/added/deleted.
The nfsd threads do not need to be suspended until the comparison step is
being done. This results in a suspension period of milliseconds for a server
with 10000+ exported file systems.
There is some code using a LOGDEBUG() macro that allow runtime debugging
output via syslog(LOG_DEBUG,...) that can be enabled by creating a file
called /var/log/mountd.debug. This code is expected to be replaced with
code that uses dtrace by cy@ in the near future, once issues w.r.t. dtrace
in stable/12 have been resolved.
The patch should not change the usage of the exports file(s), but improves
the performance of reloading large exports file(s) where there are only a
small number of changes done to the file(s).
Tested by: pen@lysator.liu.se
PR: 237860
Reviewed by: kib
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20487
install -> ${INSTALL}
mtree -> ${MTREE_CMD}
services_mkdb -> ${SERVICES_MKDB_CMD}
cap_mkdb -> ${CAP_MKDB_CMD}
pwd_mkdb -> ${PWD_MKDB_CMD}
kldxref -> ${KLDXREF_CMD}
If you do custom FreeBSD builds you may want to override those
in some cases.
Sponsored by: Sippy Software, Inc.
mountd.c uses a single linked list of "struct exportlist" structures,
where there is one of these for each exported file system on the NFS server.
This list gets long if there are a large number of file systems exported and
the list must be searched for each line in the exports file(s) when
SIGHUP causes the exports file(s) to be reloaded.
A simple benchmark that traverses SLIST() elements and compares two 32bit
fields in the structure for equal (which is what the search is)
appears to take a couple of nsec. So, for a server with 72000 exported file
systems, this can take about 5sec during reload of the exports file(s).
By replacing the single linked list with a hash table with a target of
10 elements per list, the time should be reduced to less than 1msec.
Peter Errikson (who has a server with 72000+ exported file systems) ran
a test program using 5 hashes to see how they worked.
fnv_32_buf(fsid,..., 0)
fnv_32_buf(fsid,..., FNV1_32_INIT)
hash32_buf(fsid,..., 0)
hash32_buf(fsid,..., HASHINIT)
- plus simply using the low order bits of fsid.val[0].
The first three behaved about equally well, with the first one being
slightly better than the others.
It has an average variation of about 4.5% about the target list length
and that is what this patch uses.
Peter Errikson also tested this hash table version and found that the
performance wasn't measurably improved by a larger hash table, so a
load factor of 10 appears adequate.
Tested by: pen@lysator.liu.se (with other patches)
PR: 237860
MFC after: 1 month
Probably due to historical reasons the driver uses In/Out arguments in
odd way. While this tool still never uses Out arguments to see that,
make the code to not trigger EINVAL in possible future uses.
MFC after: 2 weeks
struct xucred. Do not bump XUCRED_VERSION as struct layout is not changed.
PR: 215202
Reviewed by: tijl
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20415
MDT_MODULE info is required to be ordered before any other MDT metadata for
a given kld because it serves as an implicit record boundary between
distinct klds for linker.hints consumers. kldxref(8) has previously relied
on the assumption that MDT_MODULE was ordered relative to other module
metadata in kld objects by source code ordering.
However, C does not require implementations to emit file scope objects in
any particular order, and it seems that GCC 6.4.0 and/or binutils 2.32 ld
may reorder emitted objects with respect to source code ordering.
So: just take two passes over a given .ko's module metadata, scanning for
the MDT_MODULE on the first pass and the other metadata on subsequent
passes. It's not super expensive and not exactly a performance-critical
piece of code. This ensures MDT_MODULE is always ordered before
MDT_PNP_INFO and other MDTs, regardless of compiler/linker movement. As a
fringe benefit, it removes the requirement that care be taken to always
order MODULE_PNP_INFO after DRIVER_MODULE in source code.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D20405
This doesn't recognize any features yet, but does parse the features
string. It advertises an arbitrary packet size of 4k.
Reviewed by: markj, Scott Phillips <d.scott.phillips@intel.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20308
- Add a write_mem counterpart to read_mem to handle writes to MMIO.
- Add support for the GDB 'M' packet to write bytes to the guest's
memory. For MMIO writes, attempt to batch writes up into words.
This is imprecise, but if you write a single 2 or 4-byte aligned
word, it should be treated as a single MMIO write operation.
- While here, tidy up the parsing of the 'm' command used for reading
memory to match 'M'.
Reviewed by: markj, Scott Phillips <d.scott.phillips@intel.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20307
Use the .PATH mechanism instead so keep installing them from lib/libc/gen
While here revert 347961 and 347893 which are no longer needed
Discussed with: manu
Tested by: manu
ok manu@
Rather than the tedious and error-prone grep of sys/conf/newvers.sh,
use the new -v arg to dig out the data that's desired.
Differential Revision: https://reviews.freebsd.org/D19849
Some i2c controller hardware does not provide a way to do individual START,
REPEAT-START and STOP actions on the i2c bus. Instead, they can only do
a complete transfer as a single operation. Typically they can do either
START-data-STOP or START-data-REPEATSTART-data-STOP. In the i2c driver
framework, this corresponds to the iicbus_transfer method. In the userland
interface they are initiated with the I2CRDWR ioctl command.
These changes add a new 'tr' mode which can be specified with the '-m'
command line option. This mode should work on all hardware; when an i2c
controller driver doesn't directly support the iicbus_transfer method,
code in the i2c driver framework uses the lower-level START/REPEAT/STOP
methods to implement the transfer. After this new mode has gotten some
testing on various hardware, the 'tr' mode should probably become the
new default mode.
PR: 189914
It's invalid to reference a C++ string's c_str() buffer after the object
goes out of scope. Adjust the scope of the string to match the use in
write(2) to fix the misuse.
CID: 1393383
Reported by: Coverity
ed(4) and ep(4) have been removed. fxp(4) remains popular in older
systems, but isn't as future proof as em(4).
Reviewed by: bz, jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20311
Under certain tight race conditions, we found that the lack of a memory
barrier in bhyve's virtio handling causes it to miss a NO_NOTIFY state
transition on block devices, resulting in guest stall. The investigation
is recorded in OS-7613. As part of the examination into bhyve's use of
barriers, one other section was found to be problematic, but only on
non-x86 ISAs with less strict memory ordering. That was addressed in
this patch as well, although it was not at all a problem on x86.
PR: 231117
Submitted by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: jhb, kib, rgrimes
Approved by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19501
Check the legacy directory and use it instead if present.
Install these first if using beinstall.
UPDATING entry to follow.
Approved by: allanjude (mentor, in person)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20279
leap-seconds file from NIST at ftp://ftp.nist.gov/pub/time.
Future updates should use the NIST version of file, available
at ftp://ftp.nist.gov/pub/time/leap-seconds.list .
Requested by: ian@
Obtained from: ftp://ftp.nist.gov/pub/time/leap-seconds.3676924800
MFC after: 3 days
In mountd.c, the grouplist structures are linked into a single global
linked list headed by "grphead". The only use of this linked list is
to free all list elements when the exportlist elements are also all being
free'd at the time the exports are being reloaded.
This patch replaces this one global linked list head with a list head in
each exportlist structure, where the grouplist elements for that exported
file system are linked.
The only change is that now the grouplist elements are free'd with the
associated exportlist element as they are free'd instead of all grouplist
elements being free'd after the exportlist elements are free'd. This
change should have no effect in practice.
This is being done, since a future patch that will add a "-I" option for
incrementally updating the exports in the kernel needs to know which
grouplist elements are associated with each exported file system and
having them linked into a list headed by the exportlist element does that.
MFC after: 1 month
Factor code into two functions.
read_exportfile() a functon which reads the exports file(s) and calls
get_exportlist_one() to process each of them.
delete_export() a function which deletes the exports in the kernel for a file
system.
The contents of these functions is just the same code as was used to do the
operations, moved into separate functions. As such, there is no semantic change.
This is being done in preparation for a future commit that will add an
option to do incremental changes of kernel exports upon receiving SIGHUP.
MFC after: 1 month
As per https://datacenter.iers.org/data/latestVersion/16_BULLETIN_C16.txt:
INTERNATIONAL EARTH ROTATION AND REFERENCE SYSTEMS SERVICE (IERS)
SERVICE INTERNATIONAL DE LA ROTATION TERRESTRE ET DES SYSTEMES DE REFERENCE
SERVICE DE LA ROTATION TERRESTRE DE L'IERS
OBSERVATOIRE DE PARIS
61, Av. de l'Observatoire 75014 PARIS (France)
Tel. : +33 1 40 51 23 35
e-mail : services.iers@obspm.frhttp://hpiers.obspm.fr/eop-pc
Paris, 07 January 2019
Bulletin C 57
To authorities responsible
for the measurement and
distribution of time
INFORMATION ON UTC - TAI
NO leap second will be introduced at the end of June 2019.
The difference between Coordinated Universal Time UTC and the
International Atomic Time TAI is :
from 2017 January 1, 0h UTC, until further notice : UTC-TAI = -37 s
Leap seconds can be introduced in UTC at the end of the months of December
or June, depending on the evolution of UT1-TAI. Bulletin C is mailed every
six months, either to announce a time step in UTC, or to confirm that there
will be no time step at the next possible date.
Christian BIZOUARD
Director
Earth Orientation Center of IERS
Observatoire de Paris, France
Requested by: rgrimes
Obtained from: ftp://tycho.usno.navy.mil/pub/ntp/leap-seconds.3757622400
MFC after: 3 days
This patch moves the code that removes and frees all exportlist elements
out into a separate function called free_exports().
It does the same for the insertion of a new exportlist entry into a list.
It also adds a second argument to ex_search() for the list to use.
None of these changes have any semantic effect. They are being done to
prepare the code for future patches that convert the single linked list
for the exportlist to a hash table of lists and a patch that will do
incremental changes of exports in the kernel.
And it fixes the argument for SLIST_HEAD_INITIALIZER() to be a pointer,
which doesn't really matter, since SLIST_HEAD_INITIALIZER() doesn't use
the argument.
MFC after: 1 month
- Remove Tn macros
- Refernce sysctl(8) instead of sysctl(1)
- Start new sentences on new lines
- Capitalize NFS where needed
- Use Fx for FreeBSD
- Remove a list block (Bl) that was added to the manual page
by accident in r335174
Reviewed by: bcr
Approved by: doc (bcr)
Differential Revision: https://reviews.freebsd.org/D20215
Remove unnecessary `char*` casting for arguments passed to `cget*(3)`, and
deconst `_PATH_PRINTCAP` before passing it to `cget*` via the `printcapdb`
variable.
This unblocks ^/projects/runtime-coverage-v2 from building cleanly on
universe13a.freebsd.org. I suspect the issue was introduced through some
changes to `bsd.*.mk` inclusion on the branch, which I will continue to
investigate/isolate.
MFC after: 1 week
Tested with: clang 8 (arm64)
The Windows virtio driver ignores the advertized seg_max field and
assumes the host can accept up to 67 segments in indirect descriptors,
triggering an assert in the bhyve process.
This brings back r282922 but with a couple of changes:
- It raises the block interface segment limit to 128 instead of 67.
- Linux's virtio driver assumes that the segment limit is no
larger than the ring size. To avoid breaking Linux guests,
raise the VirtIO ring size to 128, and cap the VirtIO segment
limit at ring size - 2 (effectively 126).
Reviewed by: rgrimes, Patrick Mooney <pmooney@pfmooney.com>
Obtained from: Joyent (Linux workaround)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18831
Port the logic used by getifaddrs(3) to handle the case where
NET_RT_IFLIST returns ENOMEM, which can occur if the list size changes
between the buffer allocation and sysctl read.
PR: 195191
Submitted by: Guy Yur <guyyur@gmail.com> (original version)
MFC after: 1 week
It was reported that without #ifdef INET6 around the declaration of "nbuf",
a build would report an unused variable. For some reason, I didn't see that
warning when I did a build, but it seems reasonable to add these #ifdef INET6's.
Submitted by: dmitryluhtionov@gmail.com
MFC after: 1 week
When the CPU Topology was added to bhyve in r332298 the SMBIOS table was
missed, this table passes topology information to the system and was still
using the old concept of each vCPU is a socket with 1 core and 1 thread.
This code did not even try to use the old sysctl information to adjust
this data.
Correct that by building a proper SMBios table, mapping the > 254 cases to
0 per the SMBios 2.6 specification that is claimed by the structure.
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde and/or phk (mentor), jhb (maintainer)
MFC: 3 days
Differential Revision: https://reviews.freebsd.org/D18998
The bhyve acpi MADT table was given a static space of 256 (0x100) bytes,
this is enough space to allow VM_MAXCPU to be 21, this patch changes that
so VM_MAXCPU can be of arbitrary value and not overflow the space by
actually calculating the space needed for the table.
PR: 212782
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Approved by: bde (mentor), jhb (maintainer)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18815
r346190 added support for printing of INET6 addresses for the "-o" option
(all opens) but missed adding support for INET6 addresses for the "-l" option.
This patch adds that support.
PR: 223036
MFC after: 1 week
Parse the R_MIPS_32 and R_MIPS_64 relocations. Both Elf_Rel and
Elf_Rela relocations are handled since O32 MIPS uses Elf_Rel while N64
uses Elf_Rela. Note that R_MIPS_32 is only handled for 32-bit mips
and R_MIPS_64 for 64-bit. N32 is untested.
Reviewed by: imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D19870
points at the "latest" branch and one which points at the "quarterly"
branch. Install the "latest" version unless overridden via the newly
added PKGCONFBRANCH variable.
This does not change user-visible behaviour (assuming said vairable is
not set) but will make it easier to change the defaults in the future --
on stable branches we will want "latest" on x86 but "quarterly" elsewhere.
Discussed with: gjb
MFC after: 3 days
X-MFC: After MFCing this I'll make a direct commit to stable/* to
switch non-x86 architectures to "quarterly".
Previous spellings of my name (NGie, Ngie) weren't my legal spelling. Use Enji
instead for clarity.
While here, remove "All Rights Reserved" from copyrights I "own".
MFC after: 1 week
bhyve was previously using stdin for both reading and writing to the
console, which made it difficult to redirect console output. Use
stdin for reading and stdout for writing. This makes it easier to use
bhyve as a backend for syzkaller.
As a side effect, the change fixes a minor bug which would cause bhyve
to fail with ENOTCAPABLE if configured to use nmdm for com1 and stdio
for com2.
bhyveload already uses separate descriptors, as does the bvmcons driver.
Reviewed by: jhb
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19788
Jobs using the @<second> syntax currently only get executed if they exist
when cron is started. The simplest reproducer of this is:
echo '@20 root echo "Hello!"' >> /etc/cron.d/myjob
myjob will get loaded at the next second==0, but this echo job will not
run until cron restarts. These jobs are normally handled in
run_reboot_jobs(), which sets e->lastexit of INTERVAL jobs to the startup
time so they run 'n' seconds later.
Fix this by special-casing TargetTime > 0 in the database load. Preexisting
jobs will be handled at startup during run_reboot_jobs as normal, but if
we've reloaded a database during runtime we'll hit this case and set
e->lastexit to the current time when we process it. They will then run every
'n' seconds from that point, and a full restart of cron is no longer
required to make these jobs work.
Reported by: Juraj Lutter (otis_sk.freebsd.org)
Reviewed by: allanjude, bapt, bjk (earlier version), Juraj Lutter
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19924
This is useful for arm (possibly other arches too) where we want to have
a GENERIC kernel that only include files for the different SoC. Since
multiple SoCs/Board needs the same device we would need to do either :
Include the device in a generic file
Include the device in each file that really needs it
Option 1 works but if someone wants to create a specific kernel config
(which isn't uncommon for embedded system), he will need to add a lots
of nodevice to it.
Option 2 also works but produce a lots of warnings.
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19424
This changes the sender mail address in a similar fashion to how MAILTO may
change the recipient. The default from address remains unchanged.
MFC after: 1 week
Backing out commit pending further discussion on the PCIe version
supported by pseudo (i.e. emulated) devices. See Differential for
details.
Reviewed by: imp
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D19580
The patch adds support for printing of INET6 callback addresses.
It also adds the #ifdef INET, INET6 as requested by bz@.
PR: 223036
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19839
DEBUG_FLAGS is always added to CFLAGS. This setting appears to be
accidental and came in with r243327.
Reviewed by: anish, emaste, jhb, rgrimes
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19787
r345994 has finally fixed the bug that caused the nfsuserd(8) daemon to
fail when jails were enabled, so delete the BUGS entry from the man page.
PR: 205193
MFC after: 2 weeks
are enabled.
The nfsuserd(8) daemon does not function correctly when jails are enabled,
since localhost gets mapped to another IP address and, as such, the upcall
RPC fails.
This patch fixes the problem by doing a getsockname(2) of a socket mapped
to localhost to find out what the correct address is for the comparison
test with the upcall's from IP address.
This patch also adds INET6 support and the required #ifdef's for INET and
INET6. It now uses INET6 by default for the upcalls, if the kernel has
INET6 support and the daemon is also built with INET6 support.
Tested by: freebsd@danielengel.com (earlier version)
PR: 205193
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19218
bhyve's NVMe emulation was transferring Identify data back to the guest
incorrectly causing memory corruptions. These corruptions resulted in
core dumps and other system level errors in the guest.
In their simplest form, NVMe Physical Region Page (PRP) values in
commands indicate which physical pages to use for data transfer. The
first PRP value is not required to be page aligned but does not cross a
page boundary. The second PRP value must be page aligned, does not cross
a page boundary, and need not be contiguous with PRP1.
The code was copying Identify data past the end of PRP1. This happens to
work if PRP1 and PRP2 are physically contiguous but will corrupt guest
memory in unpredictable ways if they are not.
Fix is to copy the Identify data back to the guest piecewise (i.e. for
each PRP entry). Also fix a similarly wrong problem when copying back
Log page data.
Reviewed by: imp (mentor), araujo, jhb, rgrimes, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19695
The NVMe specification defines bits 13:4 of BAR0 as Reserved (i.e. 0x0).
Most drivers do not enforce this, but the Windows NVMe driver does and
will refuse to start the device (i.e. error 10) if any of these bits are
set.
The current BAR size calculation tries to minimize the amount of memory
the device reserves by scaling the BAR size by the maximum number of
queues supported by the device. But unless the device supports a large
number of queue pairs (over 1536), it will reserve too little memory.
The fix is to allocate a minimum of 16K bytes for BAR0.
Tested on Windows Server 2016 and 2019
Reviewed by: imp (mentor), araujo, jhb, bhyve
Approved by: imp (mentor), bhyve (jhb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19676
This patch adds a new table begemotSnmpdTransInetTable that uses the
InetAddressType textual convention and can be used to create listening
ports for IPv4, IPv6, zoned IPv6 and based on DNS names. It also supports
future extension beyond UDP by adding a protocol identifier to the table
index. In order to support this gensnmptree had to be modified.
Submitted by: harti
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16654
CXXSTD was added as the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r345203, r345704, r345705
Relnotes: yes
Tested with: make tinderbox
Differential Revision: https://reviews.freebsd.org/D19732
When a review is closed via Phabricator it updates the patch attached to the
review. I downloaded the raw patch from Phabricator, applied it, and repeated
my mistake from r345704 by accident mixing content from D19732 and D19738.
For my own personal sanity, I will try not to mix reviews like this in the
future.
MFC after: 1 month
MFC with: r345706
Approved by: emaste (mentor, implicit)
CXXSTD was added as the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r345203, r345704, r345705
Relnotes: yes
Tested with: make tinderbox
Differential Revision: https://reviews.freebsd.org/D19732
I accidentally committed code from two reviews. I will reintroduce the code to
bsd.progs.mk as part of a separate commit from r345704.
Approved by: emaste (mentor, implicit)
MFC after: 2 months
MFC with: r345704
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.
This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.
As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.
Notes:
This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.
Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:
Before this commit:
```
CXXFLAGS+= -std=c++14
```
After this commit:
```
CXXSTD= c++14
```
Reviewed by: asomers
Approved by: emaste (mentor)
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19732
and use the space to make the "tps" one character longer.
It makes the iostat(8) output a bit less messed up.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D19710
When processing mtree(5) MANIFEST files, makefs(8) previously threw an
error if it encountered an entry whose "time" attribute contained a
non-zero subsecond component (e.g. time=1551620152.987220000).
Update the handling logic to properly assign the subsecond component if
built with nanosecond support, or silently discard it otherwise.
Also, re-enable the time attribute for the kyua tests.
PR: 194703
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Differential Revision: https://reviews.freebsd.org/D19627
If underlying driver provides no TRIM/UNMAP support and operation fails
due to this reason, state it clearly in verbose mode (default)
instead of writing standard message that may be too cryptic for a user:
trim: ioctl(DIOCGDELETE) failed: nda0: Operation not supported
Now it would write:
trim: nda0: TRIM/UNMAP not supported by driver
But still use previous format including errno value for quiet mode.
Small candelete() function borrowed from diskinfo(8) code.
This function was committed by Alan Somers <asomers@FreeBSD.org>,
so give him some credit.
Reported by: chuck
PCIe devices starting with version 1.1 must set the Role-Based Error
Reporting bit.
And while we're in the neighborhood, generalize the code assigning the
device type.
Reviewed by: imp, araujo, rgrimes
Approved by: imp (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19580
The NVMe Identify Namespace data structure's Number of LBA Formats
(NLBAF) field is a 0's based value (i.e. 0x0 means 1). Since the
emulation only supports a single format, set NLBAF to 0x0, not 1.
Reviewed by: imp, araujo, rgrimes
Approved by: imp (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19579
THRE is always asserted in LSR reads, so REG_IER writes that raise
IER_ETXRDY must also set thre_int_pending.
Reported by: Illumos, according to emaste@
https://twitter.com/ed_maste/status/1106195949087584258
MFC after: 2 weeks
- Sort arguments in synopsis.
- Clarify that it is possible to specify arguments to the command (and that
they could be passed as further arguments to chroot(1)).
- Standardize the description of the flags.
- Improve formatting (e.g., do not use macros in strings specifying width).
- Add examples.
Reviewed by: bcr
Approved by: bcr (doc)
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D19582
It is quite easy make a mistake and run something like this:
trim -f /dev/da0 -r rfile
This would trim the whole device then emit an error on non-existing file -r.
Add another check to prevent this while allowing this form still
for real object names beginning from dash:
trim -f -- /dev/da0 -r rfile
MFC after: 1 week
This unbreaks ezjail and iocell, which get into an endless loop trying to
figure out how many times "freebsd-update install" needs to be called.
PR: 229346
Submitted by: Mike Cole <mcole36@gmail.com>
Approved by: bapt
MFC after: 1 week
Buildworld failed when both WITHOUT_INET6_SUPPORT and INET equivalent were set.
Fix netstat and syslogd by applying appropriate #ifdef INET/INET6 to make world
compile again.
Reviewed by: ngie, hrs, ume
Welcomed by: Michael Dexter (D17040)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19418
This ensures that the program name is included in the output, which
makes it easy to identify the source of error messages printed
during boot.
MFC after: 1 week
When using kldxref on kernel modules built with clang8 + lld8,
kldxref would be unable to find the modules metadata information,
because PowerPC64 was using the ef_nop.c implementation of
ef_reloc().
When GNU LD was used, it was also relocating the metadata section of
the .ko file. LLD does not do this, but only generate dynamic
relocations for it. With minor changes, ef_powerpc.c can now work
for PowerPC64 too.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D19370
to go to the FS image we are making cannot be read (e.g. EPERM).
Current behaviour when we issue waring but still proceeed and
return success is definitely not correct: masking out error
condition as well as making a slighly inconsistent FS where
attempt to access the file in question ends up in EBADF. See
linked DR for details.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18584
- CID 1394815, CID 1305673: Dereference before null check - memory was
allocated and the allocation checked for NULL with a call to errx()
if it failed. Code below that was guaranteed that the pointer was
non-NULL, but there was another check for NULL at the exit of the
function (after the memory had already been referenced). Eliminate
the useless NULL check.
- CID 1007452: Resource leak - Storage intended to be allocated and
returned to the caller was never freed. This was the result of a
regression in the function signature introduced in r208648 (2010)
(thanks for that find, @cem!). Fixed by altering the function
signature and passing the allocated memory to the caller as
intended. This also fixes PR158794.
- CID 1008620: Logically dead code in newsyslog.c - This was a direct
result of CID 1007452. Since the memory allocated as described there
was not returned to the caller, a subsequent check for the memory
having been allocated was dead code. Returning the memory
re-animates the code that is the subject of this CID.
- CID 1006131: Unused value - in parsing a configuration file, a
pointer to the end of the last field was saved, but not used after
that. Rewrite to use the pointer value. This could have been fixed
by avoiding the assignment altogether, but this solutions more
closely follows the pattern used in the preceding code.
PR: 158794
Reported by: Coverity, Ken-ichi EZURA <k.ezura@gmail.com> (PR158794)
Reviewed by: cem, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19105
It was pointed out that a couple of the "memory leak" CIDs that I
fixed were arguably Coverity errors rather than errors in the
newsyslog code and the cure was worse than the disease. Revert both
changes. The first change, which included fixes for other Coverity
errors, will be re-worked to omit the troublesome changes and then
re-committed with the remaining fixes.
Reported by: bde
Sponsored by: Dell EMC Isilon
Add or fix options to control static and dynamic configuration. Keep
the default of scteken, but default to statically configuring all available
emulators (now 3 instead of 1).
The dumb emulator is almost usable. libedit and libreadline handle
dumb terminals perfectly for at least shell history. less(1) works
as well as possible except on exit. But curses programs make messes.
The dumb emulator has strange color support, with 2 dumb colors for
normal output but fancy colorization for the cursor, mouse pointer and
(with a non-dumb initial emulator) for low-level console output.
Using the sc emulator instead of the default of scteken fixes at least
the following bugs:
- NUL is a printing character in cons25 but not in teken
- teken doesn't support fixed colors for "reverse" video.
- The best versions of sc are about 10 times faster than scteken (for
printing to the frame buffer). This version is only about 5 times
faster.
Fix configuration features:
- make SC_DFLT_TERM (for setting the initial emulator) a normal option.
Add configuration features:
- negative options SC_NO_TERM_* for omitting emulators in the static config.
Modules for emulators might work, but I don't know of any
- vidcontrol -e shows the available emulators
- vidcontrol -E <emulator> sets the active emulator.
Specifically, I put the new option line in the wrong place, and then fixed
up the rest without realizing it. This puts the usage statement back to
what it was, with an additional line for the new -V option.
Reported by: mav
Sponsored by: iXsystems Inc.
We've got some cases where the other end of gssd's AF_LOCAL socket gets
closed, resulting in an error (and SIGPIPE) when it tries to do I/O to it.
Closing without cleaning up means the next time nfsd starts up, it hangs,
unkillably; this allows gssd to handle that particular error.
* Limit the retry cound in gssd_syscall to 5.
The default is INT_MAX, which effectively means forever. And it's an
uninterruptable RPC call, so it will never stop.
The two changes mitigate the problem.
Reviewed by: macklem
MFC after: 2 weeks
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D19153
The result of a strdup() was stored in a global variable and not freed
before program exit. This is a follow-up to r343906. That change
attempted to plug these resource leaks but managed to miss a code path
on which the leak still occurs. Plug the leak on that path, too.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Improve help text to include example release numbers for reference
and clarify the -F option.
PR: 231185, 214619
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reviewed by: delphij, rgrimes
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18944
Summary:
Now that mpc85xx can boot via ubldr, move ubldr to a separate
filesystem, mounted on /boot/uboot, so that a fresh install can boot correctly.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D18709
libifconfig is built as a static-only PRIVATELIB (and there is no _pie.a
version) so disable PIE in libifconfig's consumer.
Sponsored by: The FreeBSD Foundation
Specifically, this allows (via "-V vhostname") telling nfsd what principal
to use, instead of the hostname. This is used at iXsystems for fail-over in
HA systems.
Reviewed by: macklem
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D19191
was incorrectly implemented leading to a possible double free.
It is possible for both the conditional free,
and the unconditional free added in r340044 to be done,
fix that by initializing uopt to NULL,
removing the conditional free,
and only using the unconditional free at the end.
Reported by: Patrick Mooney (patrick.mooney@joyent.com)
Reviewed by: jhb (maintainer), Patrick Mooney (joyent/illumos)
Approved by: bde (mentor)
CID: 1357336
MFC after: 3 days
MFC with: 340044
Differential Revision: https://reviews.freebsd.org/D19202
nopt is the only allocated space,
xopt and cp are aliases into that allocated space.
Remove the 2 unneeded free's
Reported by: Patrick Mooney (@pmooney_pfmooney.com)
Reviewed by: jhb (maintainer), Patrick Mooney (joyent/illumos)
Approved by: bde (mentor)
CID: 1305412
MFC after: 3 days
MFC with: 340042
Differential Revision: https://reviews.freebsd.org/D19200
Instead of using pw to modify group membership, users often edit
/etc/group by hand, which is discouraged. Provide an example of
adding a user to the wheel group, which is a common use case.
I'm using a different user here as in the previous example as that
deleted the user (although the examples don't necessarily have to
be followed in order).
Reviewed by: rgrimes,0mp
Approved by: 0mp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19123
- CID 1394815, CID 1305673: Dereference before null check - memory was
allocated and the allocation checked for NULL with a call to errx()
if it failed. Code below that was guaranteed that the pointer was
non-NULL, but there was another check for NULL at the exit of the
function (after the memory had already been referenced). Eliminate
the useless NULL check.
- CID 1007454, CID 1007453: Resource leak - The result of a strdup()
was stored in a global variable and not freed before program exit.
- CID 1007452: Resource leak - Storage intended to be allocated and
returned to the caller was never freed. This was the result of a
regression in the function signature introduced in r208648 (2010)
(thanks for that find, @cem!). Fixed by altering the function
signature and passing the allocated memory to the caller as
intended. This also fixes PR158794.
- CID 1008620: Logically dead code in newsyslog.c - This was a direct
result of CID 1007452. Since the memory allocated as described there
was not returned to the caller, a subsequent check for the memory
having been allocated was dead code. Returning the memory
re-animates the code that is the subject of this CID.
- CID 1006131: Unused value - in parsing a configuration file, a
pointer to the end of the last field was saved, but not used after
that. Rewrite to use the pointer value. This could have been fixed
by avoiding the assignment altogether, but this solutions more
closely follows the pattern used in the preceding code.
PR: 158794
Reported by: Coverity, Ken-ichi EZURA <k.ezura@gmail.com> (PR158794)
Reviewed by: cem, markj
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Tested using the virtual_bt_speaker(8) tool from the virtual_oss(8)
project at github.com.
PR: 210089
MFC after: 1 week
Sponsored by: Mellanox Technologies
Use recent best practices for Copyright form at the top of
the license:
1. Remove all the All Rights Reserved clauses on our stuff. Where we
piggybacked others, use a separate line to make things clear.
2. Use "Netflix, Inc." everywhere.
3. Use a single line for the copyright for grep friendliness.
4. Use date ranges in all places for our stuff.
Approved by: Netflix Legal (who gave me the form), adrian@ (pmc files)
With r319610, sesutil started twiddling the bits of every SES device.
Not everything is a disk slot, there are also fan controllers, temperature
sensors, even power supplies, among other things controlled by SES.
Add a type check to make sure we are only operating on device slot and array
device slot elements. Other type elements will be skipped, but it would be
simple to add additional cases for controlling the ident LEDs of other
element types (which are not necessarily the same bits).
Rather than doing raw bit manipulation of an unstructured byte array using
unnamed numeric constants, leverage existing code abstractions.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D19052
These are currently not reproducible because they're built by the
makewhatis on the freebsd-update build host, not the one in the tree.
Regenerate after update, and later we can avoid including it in
freebsd-update data.
PR: 214545, 217389
Reviewed by: delphij
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10482
