Commit Graph

15 Commits

Author SHA1 Message Date
rnoland
04aaff5298 Import simple drm memory manager.
This is required for the VIA driver and at least some parts are needed
for GEM.

MFC after:	2 weeks
2010-01-31 14:25:29 +00:00
rnoland
c98bb6fb8f Add support for Intel G41 chipset
Submitted by:	Artyom Mirgorodsky <man@email.com.ua>
MFC after:	3 days
2009-10-11 01:54:00 +00:00
rnoland
bd6fb92679 Some more cleanups for vblank code on Intel.
The Intel 2d driver calls modeset before reinstalling the handler on
a vt switch.  This means that vblank status ends up getting cleared
after it has been setup.  Restore saved values for the pipestat registers
rather than just wiping them out.

MFC after:	3 days
2009-06-25 18:27:08 +00:00
rnoland
4f053b7460 The G45 docs indicate that all G4X chips use the new framecount register.
Intel agrees with my reading of the docs, make it so for all G4X chips.

The new register also has a 32 bit width as opposed to 24 bits.  Fix
things up so that the counters roll over properly.

MFC after:	3 days
2009-06-20 16:45:14 +00:00
rnoland
78db4b9606 Pull in some suspend / resume changes from Intel's code
Tested by:	mav@
MFC after:	3 days
2009-03-19 08:22:56 +00:00
rnoland
ddd5c68e84 Initialize the vblank structures at load time. Previously we did this
at irq install/uninstall time, but when we vt switch, we uninstall the
irq handler.  When the irq handler is reinstalled, the modeset ioctl
happens first.  The modeset ioctl is supposed to tell us that we can
disable vblank interrupts if there are no active consumers.  This will
fail after a vt switch until another modeset ioctl is called via dpms
or xrandr.  Leading to cases where either interrupts are on and can't
be disabled, or worse, no interrupts at all.

MFC after:	2 weeks
2009-02-28 02:37:55 +00:00
rnoland
35f0e5ba8f The GM45 handles vblank differently. Pull the changes from Intel in.
MFC after:	2 Weeks
2009-02-25 20:24:13 +00:00
rnoland
ca01a44d40 This was part of a sync to the code that Intel is shipping in linux.
- Remove the old TTM interface
	- Move register definitions to i915_reg.h
	- Overhaul the irq handler

MFC after:	2 weeks
2009-02-25 18:44:50 +00:00
rnoland
577eb25e17 The vblank_swap ioctl was fundamentally race prone. Get rid of it.
MFC after:	2 weeks
2009-02-25 18:22:57 +00:00
rnoland
bbc754f502 resync to git master
This reverts a private patch which is causing issues with many Intel chipsets.
I will review that patch and see what we need to do to fix it up later, but
for the time being, we will just get these chips working again.

This update contains a lot of code cleanup and is post gem merge
(no, we don't have gem support).  It should prove much easier to read the
code now.  A lot of thanks goes to vehemens for that work.  I have adapted
the code to use cdevpriv for tracking per open file data.  That alleviates
the old ugly hack that we used to try and accomplish the task and helped to
clean up the open / close behavior a good bit.  This also replaces the hack
that was put in place a year or so ago to prevent radeons from locking up
with AIGLX enabled.  I have had a couple of radeon testers report that it
still works as expected, though I no longer have radeon hardware to test with
myself.  Other various fixes from the linux crew and Intel, many of
which are muddled in with the gem merge.

Approved by:	jhb (mentor)
Obtained from:	mesa/drm git master
MFC after:	2 weeks
2008-10-03 16:59:11 +00:00
rnoland
8ebfdfe248 Update drm kernel drivers.
This is a sync to mesa/drm pre-gem, with a few fixes on top of that.
It also contains one local patch supplied by kib@ that I can't apply to
git.master shared code.

Approved by:	flz
Obtained from:	mesa/drm git.master
MFC after:	2 weeks
2008-08-23 20:59:12 +00:00
anholt
50839278da Merge from DRM upstream:
- Add support for Intel 965 Express chipsets.
- Add support for R200 vertex programs, along with minor bugfixes.
- Add support for vblank synchronization to pipe B of Intel hardware
  (laptop screens).
2006-09-07 23:04:47 +00:00
anholt
766ae564a2 Update to DRM CVS as of 2006-04-09. The most notable new feature is the updated
Radeon memmap code, which with a new DDX driver and DRI drivers should fix
long-term stability issues with Radeons.  Also adds support for r200's
ATI_fragment_shader, r300 texrect support and texture caching fixes, i915
vblank support and bugfixes, and new PCI IDs.
2006-04-09 20:45:45 +00:00
anholt
3de8a0378f Update DRM to CVS snapshot as of 2005-11-28. Notable changes:
- S3 Savage driver ported.
- Added support for ATI_fragment_shader registers for r200.
- Improved r300 support, needed for latest r300 DRI driver.
- (possibly) r300 PCIE support, needs X.Org server from CVS.
- Added support for PCI Matrox cards.
- Software fallbacks fixed for Rage 128, which used to render badly or hang.
- Some issues reported by WITNESS are fixed.
- i915 module Makefile added, as the driver may now be working, but is untested.
- Added scripts for copying and preprocessing DRM CVS for inclusion in the
  kernel.  Thanks to Daniel Stone for getting me started on that.
2005-11-28 23:13:57 +00:00
anholt
ed881e3d94 Update to DRM CVS as of 2005-04-12, bringing many changes:
- Split core DRM routines back into their own module, rather than using the
  nasty templated system like before.
- Development-class R300 support in radeon driver (requires userland pieces, of
  course).
- Mach64 driver (haven't tested in a while -- my mach64s no longer fit in the
  testbox).  Covers Rage Pros, Rage Mobility P/M, Rage XL, and some others.
- i915 driver files, which just need to get drm_drv.c fixed to allow attachment
  to the drmsub device.  Covers i830 through i915 integrated graphics.
- savage driver files, which should require minimal changes to work.  Covers the
  Savage3D, Savage IX/MX, Savage 4, ProSavage.
- Support for color and texture tiling and HyperZ features of Radeon.

Thanks to:	scottl (much p4 handholding)
		Jung-uk Kim (helpful prodding)
PR:		[1] kern/76879, [2] kern/72548
Submitted by:	[1] Alex, lesha at intercaf dot ru
		[2] Shaun Jurrens, shaun at shamz dot net
2005-04-16 03:44:47 +00:00