stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).
ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
referred to as the experimental server. It also adds a new command
line option "-o" to both mountd and nfsd that forces them to use the
old/regular NFS server. The "-e" option for these commands is now
a no-op, since the new server is the default. I will be committing rc
script and man changes soon. Discussed on freebsd-fs@.
If EV_EXIT causes an exit, use the exception mechanism to unwind
redirections and local variables. This way, if the final command is a
redirected command, an EXIT trap now executes without the redirections.
Because of these changes, EV_EXIT can now be inherited by the body of a
function, so do so. This means that a function no longer prevents a fork
before an exec being skipped, such as in
f() { head -1 /etc/passwd; }; echo $(f)
Wrapping a single builtin in a function may still cause an otherwise
unnecessary fork with command substitution, however.
An exit command or -e failure still invokes the EXIT trap with the
original redirections and local variables in place.
Note: this depends on SHELLPROC being gone. A SHELLPROC depended on
keeping the redirections and local variables and only cleaning up the
state to restore them.
Hold the vnode around the region where object lock is dropped, until
vnode lock is acquired.
Do not drop the vnode reference for a case when the object was
deallocated during unlock. Note that in this case, VV_TEXT is cleared
by vnode_pager_dealloc().
Reported and tested by: pho
Reviewed by: alc
MFC after: 3 days
- While here, remove a few C comments that don't seem to contribute
anything additional to the man page.
PR: 146047
Submitted by: arundel
MFC after: 3 days
the mutexes in the wrong order for the case where the
MBF_MNTLSTLOCK is set. I believe this did have the
potential for deadlock. For example, if multiple nfsd threads
called vfs_busyfs(), which calls vfs_busy() with MBF_MNTLSTLOCK.
Thanks go to pho for catching this during his testing.
Tested by: pho
Submitted by: kib
MFC after: 2 weeks
spurious (and fatal) interrupt errors.
One user reported seeing this:
Apr 22 18:04:24 ceres kernel: ar5416GetPendingInterrupts: fatal error,
ISR_RAC 0x0 SYNC_CAUSE 0x2000
SYNC_CAUSE of 0x2000 is AR_INTR_SYNC_LOCAL_TIMEOUT which is a bus timeout;
this shouldn't cause HAL_INT_FATAL to be set.
After checking out ath9k, ath9k_ar9002_hw_get_isr() clears (*masked)
before continuing, regardless of whether any bits in the ISR registers
are set. So if AR_INTR_SYNC_CAUSE is set to something that isn't
treated as fatal, and AR_ISR isn't read or is read and is 0, then
(*masked) wouldn't be cleared. Thus any of the existing bits set
that were passed in would be preserved in the output.
The caller in if_ath - ath_intr() - wasn't setting the masked value
to 0 before calling ath_hal_getisr(), so anything that was present
in that uninitialised variable would be preserved in the case above
of AR_ISR=0, AR_INTR_SYNC_CAUSE != 0; and if the HAL_INT_FATAL bit
was set, a fatal condition would be interpreted and the chip was
reset.
This patch does the following:
* ath_intr() - set masked to 0 before calling ath_hal_getisr();
* ar5416GetPendingInterrupts() - clear (*masked) before processing
continues; so if the interrupt source is AR_INTR_SYNC_CAUSE
and it isn't fatal, the hardware isn't reset via returning
HAL_INT_FATAL.
This doesn't fix any underlying errors which trigger
AR_INTR_SYNC_LOCAL_TIMEOUT - which is a bus timeout of some
sort - so that likely should be further investigated.
like, determines the path to a pid file as it is specified in a conf file.
Use the new feature for rc.d/named and rc.d/devd, the 2 services in the
base that list their pid files in their conf files.
Remove the now-obsolete named_pidfile, and warn users if they have it set.
r216801
- cosmetic changes and style fixes
- Trick GAS/GCC into compiling access to TICK/(S)TICK_COMPARE independently
of the selected instruction set. Moreover, sun4v doesn't need the WAR for
BlackBird CPUs.
- Rename the "xor" parameter to "xorval" as the former is a reserved keyword
in C++.
vfs_sanitizeopts() can handle "ro" and "rw" options properly, there is
no more need to add "noro" in vfs_donmount() to cancel "ro".
This also fixes a problem of canceling options beginning with "no".
For example, "noatime" didn't cancel "nonoatime". Thus it was possible
that both "noatime" and "nonoatime" were active at the same time.
Reviewed by: bde
- Centralize PCI resource allocation/release.
- Enable flowid (TSS) support.
- Added "per-fastpath" locks and watchdog timeouts.
- Fixed problem where the CQ producer index was advanced beyond
the size of the CQ ring during initialization.
- Replaced hard-coded debug levels in some debug print statements.
- More style(9) fixes.
MFC after: Two weeks
r220375 all drivers enabled in the sparc64 GENERIC should be either
correctly using bus_dmamap_sync(9) calls or supply BUS_DMA_COHERENT
when appropriate or as a workaround for missing bus_dmamap_sync(9)
calls (sound(4) drivers and partially sym(4)). In at least some
configurations taking advantage of the streaming cache results in
a modest performance improvement.
- Remove the memory barrier for BUS_DMASYNC_PREREAD which as the
comment already suggested is bogus.
- Add my copyright for having implemented several things like support
for the Fire and Oberon IOMMUs, taking over PROM IOMMU mappings etc.
should respond with all zeroes to any access to slave registers. Test with
PATA devices confirmed such behavior. Unluckily, Intel SATA controllers in
legacy emulation mode behave differently, not making any difference between
ATA and ATAPI devices. It causes false positive slave device detection and,
as result, command timeouts.
To workaround this problem, mask result of legacy-emulated soft-reset with
the device presence information received from the SATA-specific registers.
nm_maxfilesize. This value rarely, if ever, changes
and the nm_mtx mutex is locked/unlocked earlier in
the function, which should be sufficient to avoid
getting a stale cached value for it. There is a
discussion w.r.t. what these tests should be, but
I've left them basically the same as the regular
NFS client for now.
Suggested by: pjd
MFC after: 2 weeks
- Test newslog with clasic naming of rotates files to actually test
the correct number of log files as newsyslog now does the correct
thing post r220926.
- Add some more newsyslog tests which tests keeping 0, 1, and 2
logfiles.
requested in newsyslog.conf. This was only the case using the non-time
based filenames (.0, .1, .2 etc.).
The change also makes newsyslog clean clean up the old extra logfile so
users don't end up with a single stale logfile which won't be rotated
out.
This change also cleans up some code a bit to avoid more copy / paste
code and removes some old copy / paste code in the process.
PR: bin/76697
MFC after: 2 weeks
- TCO_MESSAGEx: TCO specific regs providing the ability to monitor BIOS
bootup activity.
- TCO_NEWCENTURY: reporting RTC year roll over.
- TCO_NMI2SMI_EN, TCO_NMI_NOW: controlling SMIs conversion to NMIs and
NMI trigger.
- SMI_GBL_EN: Enabling SMI delivery for all the northbridge controller.
MFC after: 10 days
allocate all of them at attach time. This allows to avoid moving
keys around in the most-recently-used queue and needs no mutex
synchronization nor refcounting.
MFC after: 2 weeks
create reasonably large cache for the keys that is filled when
needed. The previous version was problematic for very large providers
(hundreds of terabytes or serval petabytes). Every terabyte of data
needs around 256kB for keys. Make the default cache limit big enough
to fit all the keys needed for 4TB providers, which will eat at most
1MB of memory.
MFC after: 2 weeks
This improves hard-reset and hot-plug on these ports.
- Device with ID 0x29218086 is a 2-port variant of ICH9 in legacy mode.
Skip probing for nonexistent slave devices there.
