extreme outliers from dodgy drives. Adjust comments to reflect this,
and make sure that the number of latency buckets match in the two
places where it matters.
o Allow I/O scheduler to gather times on 32-bit systems. We do this by shifting
the sbintime_t over by 8 bits and truncating to 32-bits. This gives us 8.24
time. This is sufficient both in range (256 seconds is about 128x what current
users need) and precision (60ns easily meets the 1ms smallest bucket size
measurements). 64-bit systems are unchanged. Centralize all the time math so
it's easy to tweak tha range / precision tradeoffs in the future.
o While I'm here, the I/O scheduler should be using periph_data rather than
sim_data since it is operating on behalf of the periph.
Differential Review: https://reviews.freebsd.org/D12119
All ndaX and ndaXpY nodes will appear as nvdX and nvdXpY as well
(through symlinks in devfs via the normal disk aliasing mechanism in
GEOM).
Differential Revision: https://reviews.freebsd.org/D11873
The attached patch lets adaasync() set ADA_STATE_WCACHE based on
ADA_FLAG_CAN_WCACHE instead of ADA_FLAG_CAN_RAHEAD.
This fixes a regression introduced in r300207 which changed
the flag names.
PR: 220948
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
MFC after: 1 week
the IO type (Admin or NVM) using XPT op-codes XPT_NVME_ADMIN or
XPT_NVME_IO.
Submitted by: Chuck Tuffli <chuck@tuffli.net>
Differential Revision: https://reviews.freebsd.org/D10247
Implement the MMC/SD/SDIO protocol within a CAM framework. CAM's
flexible queueing will make it easier to write non-storage drivers
than the legacy stack. SDIO drivers from both the kernel and as
userland daemons are possible, though much of that functionality will
come later.
Some of the CAM integration isn't complete (there are sleeps in the
device probe state machine, for example), but those minor issues can
be improved in-tree more easily than out of tree and shouldn't gate
progress on other fronts. Appologies to reviews if specific items
have been overlooked.
Submitted by: Ilya Bakulin
Reviewed by: emaste, imp, mav, adrian, ian
Differential Review: https://reviews.freebsd.org/D4761
merge with first commit, various compile hacks.
If a peripheral driver (e.g. da, sa, cd) is added or removed from the
peripheral driver list while an unrelated peripheral driver instance (e.g.
da0, sa5, cd2) is going away and is inside camperiphfree(), we could
dereference an invalid pointer.
When peripheral drivers are added or removed (see periphdriver_register()
and periphdriver_unregister()), the peripheral driver array is resized
and existing entries are moved.
Although we hold the topology lock while we traverse the peripheral driver
list, we retain a pointer to the location of the peripheral driver pointer
and then drop the topology lock. So we are still vulnerable to the list
getting moved around while the lock is dropped.
To solve the problem, cache a copy of the peripheral driver pointer. If
its storage location in the list changes while we have the lock dropped, it
won't have any effect.
This doesn't solve the issue that peripheral drivers ("da", "cd", as opposed
to individual instances like "da0", "cd0") are not generally part of a
reference counting scheme to guard against deregistering them while there
are instances active. The caller (generally the person unloading a module)
has to be aware of active drivers and not unload something that is in use.
sys/cam/cam_periph.c:
In camperiphfree(), cache a pointer to the peripheral driver
instance to avoid holding a pointer to an invalid memory location
in the event that the peripheral driver list changes while we have
the topology lock dropped.
PR: kern/219701
Submitted by: avg
MFC after: 3 days
Sponsored by: Spectra Logic
Without the allocation length set, the target will either reject
the command or complete it without transferring any data.
This fixes the REPORT ZONES command for SCSI ZBC protocol devices,
as well as ATA ZAC protocol devices that are behind a SCSI to ATA
translation layer. (LSI/Broadcom's 12Gb SAS adapters translate ZBC
commands to ZAC commands.) Those are Host Aware and Host Managed SMR
drives.
This will fix REPORT ZONE commands sent to the da(4) driver via the
GEOM bio interface and zonectl, and REPORT ZONE commands sent from
camcontrol(8).
Note that in the case of camcontrol(8), we currently only send
SCSI ZBC commands to native SCSI protocol devices, not ATA devices
behind a SAT layer.
sys/cam/scsi/scsi_da.c:
Fill in the length field in scsi_zbc_in().
MFC after: 3 days
Sponsored by: Spectra Logic
After r307132 the sbuf buffer is malloc()ed, but corresponding
sbuf_delete() call was missing.
Fix a nearby whitespace bug.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
If the user issues a MTIOCEXTGET ioctl, and the tape drive in question has
a serial number that is longer than 80 characters, we malloc a buffer in
saextget() to hold the output of cam_strvis().
Since a mutex is held in that codepath, doing a M_WAITOK malloc could lead
to sleeping while holding a mutex. Change it to a M_NOWAIT malloc and bail
out if we fail to allocate the memory. Devices with serial numbers longer
than 80 bytes are very rare (I don't recall seeing one), so this
should be a very unusual case to hit. But it is a bug that should be fixed.
sys/cam/scsi/scsi_sa.c:
In saextget(), if we need to malloc a buffer to hold the output of
cam_strvis(), don't wait for the memory. Fail and return an error
if we can't allocate the memory immediately.
PR: kern/220094
Submitted by: Jia-Ju Bai <baijiaju1990@163.com>
MFC after: 3 days
Sponsored by: Spectra Logic
o Separate fields of struct socket that belong to listening from
fields that belong to normal dataflow, and unionize them. This
shrinks the structure a bit.
- Take out selinfo's from the socket buffers into the socket. The
first reason is to support braindamaged scenario when a socket is
added to kevent(2) and then listen(2) is cast on it. The second
reason is that there is future plan to make socket buffers pluggable,
so that for a dataflow socket a socket buffer can be changed, and
in this case we also want to keep same selinfos through the lifetime
of a socket.
- Remove struct struct so_accf. Since now listening stuff no longer
affects struct socket size, just move its fields into listening part
of the union.
- Provide sol_upcall field and enforce that so_upcall_set() may be called
only on a dataflow socket, which has buffers, and for listening sockets
provide solisten_upcall_set().
o Remove ACCEPT_LOCK() global.
- Add a mutex to socket, to be used instead of socket buffer lock to lock
fields of struct socket that don't belong to a socket buffer.
- Allow to acquire two socket locks, but the first one must belong to a
listening socket.
- Make soref()/sorele() to use atomic(9). This allows in some situations
to do soref() without owning socket lock. There is place for improvement
here, it is possible to make sorele() also to lock optionally.
- Most protocols aren't touched by this change, except UNIX local sockets.
See below for more information.
o Reduce copy-and-paste in kernel modules that accept connections from
listening sockets: provide function solisten_dequeue(), and use it in
the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4),
infiniband, rpc.
o UNIX local sockets.
- Removal of ACCEPT_LOCK() global uncovered several races in the UNIX
local sockets. Most races exist around spawning a new socket, when we
are connecting to a local listening socket. To cover them, we need to
hold locks on both PCBs when spawning a third one. This means holding
them across sonewconn(). This creates a LOR between pcb locks and
unp_list_lock.
- To fix the new LOR, abandon the global unp_list_lock in favor of global
unp_link_lock. Indeed, separating these two locks didn't provide us any
extra parralelism in the UNIX sockets.
- Now call into uipc_attach() may happen with unp_link_lock hold if, we
are accepting, or without unp_link_lock in case if we are just creating
a socket.
- Another problem in UNIX sockets is that uipc_close() basicly did nothing
for a listening socket. The vnode remained opened for connections. This
is fixed by removing vnode in uipc_close(). Maybe the right way would be
to do it for all sockets (not only listening), simply move the vnode
teardown from uipc_detach() to uipc_close()?
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D9770
The Genesys chip is failing when issueing READ_CAP(16) command.
Force a quirk to disable it and use READ_CAP(10) instead.
Also, depending on used firmware, GL3224 can be recognized
either as 'storage device' or 'mass storage class' -
enable both variants in scsi_quirk_table.
Submitted by: Wojciech Macek <wma@semihalf.com>
Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: mav
Differential revision: https://reviews.freebsd.org/D10902
The motivation for this is two-fold.
1. Some old WD SATA disks may appear as if they need to be spun up
when they are already spinning. Those disks would respond with
an error to the spin-up request.
2. Even if we really fail to spin up the disk, we still can try to
proceed to the subsequent phases. If we fail later on, then no
difference. Otherwise we get a chance to communicate with the
disk which is better than completely ignoring it, because a user
can try to recover the disk.
Reviewed by: mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D10896
This will help application developers simulate end of tape conditions.
To inject an error in sa0:
sysctl kern.cam.sa.0.inject_eom=1
This will return the next read or write request queued with 0 bytes
written. Any subsequent writes or reads will go along as usual.
This will also cause the early warning position flag to get set
for the next position query. So, 'mt status' will show the BPEW
(Beyond Programmable Early Warning) flag on the first query after
an error injection. After that, the position flags will be as they
are in the underlying tape drive.
Also, update the sa(4) man page to describe tape parameters,
which can be set via 'mt param'.
sys/cam/scsi/scsi_sa.c:
In saregister(), create the inject_eom sysctl variable.
In sastart(), check to see whether inject_eom is set. If
so, return the read or write with 0 bytes written to
indicate EOM. Set the set_pews_status flag so that we
fake PEWS status in the next position call for reads, and the
next 3 calls for writes. This allows the user to see the BPEW
flag one time via 'mt status'.
In sagetpos(), check the set_pews_status flag and fake
PEWS status and decrement the counter if it is set.
share/man/man4/sa.4:
Document the inject_eom sysctl variable.
Document all of the parameters currently supported via
'mt param'.
usr.bin/mt/mt.1:
Point the user to the sa(4) man page for more details on
supported parameters.
MFC after: 3 days
Sponsored by: Spectra Logic
sys/cam/scsi/scsi_all.h:
Add the SCSI Solid State Media log page (0x11) structure
definition. This gives the percentage used (in terms of
lifetime flash wear) of an SSD.
MFC after: 3 days
Sponsored by: Spectra Logic
After FreeBSD SVN revision 236814, the pass(4) driver changed from
only doing error recovery when the CAM_PASS_ERR_RECOVER flag was
set on a CCB to sometimes doing error recovery if the passed in
retry count was non-zero.
Error recovery would happen if two conditions were met:
1. The error recovery action was simply a retry. (Which is most
cases.)
2. The retry_count is non-zero. (Which happened a lot because of
cut-and-pasted code.)
This explains a bug I noticed in with camcontrol:
# camcontrol tur da34 -v
Unit is ready
# camcontrol reset da34
Reset of 1:172:0 was successful
At this point, there should be a Unit Attention:
# camcontrol tur da34 -v
Unit is ready
No Unit Attention.
Try it again:
# camcontrol reset da34
Reset of 1:172:0 was successful
Now set the retry_count to 0 for the TUR:
# camcontrol tur da34 -v -C 0
Unit is not ready
(pass42:mps1:0:172:0): TEST UNIT READY. CDB: 00 00 00 00 00 00
(pass42:mps1:0:172:0): CAM status: SCSI Status Error
(pass42:mps1:0:172:0): SCSI status: Check Condition
(pass42:mps1:0:172:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset occurred)
(pass42:mps1:0:172:0): Field Replaceable Unit: 2
There is the unit attention. camcontrol(8) has a default
retry_count of 1, in case someone sets the -E flag without
setting -C.
The CAM_PASS_ERR_RECOVER behavior was only broken with the
CAMIOCOMMAND ioctl, which is the synchronous pass(4) API. It has
worked as intended (error recovery is only done when the flag
is set) in the asynchronous API (CAMIOQUEUE ioctl).
sys/cam/scsi/scsi_pass.c:
In passsendccb(), when calling cam_periph_runccb(), only
specify the error routine when CAM_PASS_ERR_RECOVER is set.
share/man/man4/pass.4:
Document that CAM_PASS_ERR_RECOVER is needed to enable
error recovery.
Reported by: Terry Kennedy <TERRY@glaver.org>
PR: kern/218572
MFC after: 1 week
Sponsored by: Spectra Logic
sys/cam/scsi/scsi_all.c:
In the asc_table, if we get a 0x20,0x02 error ("Access denied -
no access rights"), don't bother retrying. Instead, immediately
fail the command.
This is the error returned by Self Encrypting Drives (SED) when
they are locked.
MFC after: 3 days
Sponsored by: Spectra Logic
using a driver-supplied sbuf for printing device discovery
announcements. This helps ensure that messages to the console
will be properly serialized (through sbuf_putbuf) and not be
truncated and interleaved with other messages. The
infrastructure mirrors the existing xpt_announce_periph()
entry point and is opt-in for now. No content or formatting
changes are visible to the operator other than the new coherency.
While here, eliminate the stack usage of the temporary
announcement buffer in some of the drivers. It's moved to the
softc for now, but future work will eliminate it entirely by
making the code flow more linear. Future work will also address
locking so that the sbufs can be dynamically sized.
The scsi_da, scs_cd, scsi_ses, and ata_da drivers are converted
at this point, other drivers can be converted at a later date.
A tunable+sysctl, kern.cam.announce_nosbuf, exists for testing
purposes but will be removed later.
TODO:
Eliminate all of the code duplication and temporary buffers. The
old printf-based methods will be retired, and xpt_announce_periph()
will just be a wrapper that uses a dynamically sized sbuf. This
requires that the register and deregister paths be made malloc-safe,
which they aren't currently.
Sponsored by: Netflix
According to Warner, multiple TRIM BIOs are collapsed into a single CCB with
NULL bp. It is invalid to biotrack() NULL, and results in a fault. So,
don't do that.
Reported by: asomers@
Sponsored by: Dell EMC Isilon
The goal of this work is to remove the explicit dependency for ctl(4)
on iscsi(4), so end-users without iscsi(4) support in the kernel can
use ctl(4) for its other functions.
This allows those without iscsi(4) support built into the kernel to use
ctl(4) as a test mechanism. As a sidenote, this was possible around the
10.0-RELEASE period, but made impossible for end-users without iscsi(4)
between 10.0-RELEASE and 11.0-RELEASE.
Automatically load cfiscsi(4) from ctladm(8) and ctld(8) for backwards
compatibility with previously releases. The automatic loading feature is
compiled into the beforementioned tools if MK_ISCSI == yes when building
world.
Add a manpage for cfiscsi(4) and refer to it in ctl(4).
Differential Revision: D10099
MFC after: 2 months
Relnotes: yes
Reviewed by: mav, trasz
Sponsored by: Dell EMC Isilon
I think this message is not very useful for end user. Also its formatting
does not match other messages printed at that time. Those who really need
this information can always find it in `camcontrol negotiate daX -v`.
MFC after: 2 weeks
For three years now CAM does not use SIM lock, but still enforces SIM to
use it. Remove this requirement, allowing SIMs to have any locking they
prefer, if they pass no mutex to cam_sim_alloc().
MFC after: 2 weeks
Some SIMs report much less untagged device openings then tagged ones.
Target mode devices are not handled by regular probing routines, and so
there is nothing to increase queue size for them to the SIM's maximum.
To fix that resize the queue explicitly on ctl periph registration.
This radically improves performance of mpt(4) in target mode.
Also fetch and report device queue statistics in `ctladm dumpstructs`,
since regular way of `camcontrol tags` is not usable in target mode.
MFC after: 2 weeks
Queue statistics has nothing to do with presence or absence of INQUIRY
data, etc. Target mode devices are never configured, but have queues.
MFC after: 2 weeks
Some SIMs may not abort them implicitly, that either fail the LUN disable
request or just make us wait for those CCBs forever. With this change
I can successfully disable LUNs on mpt(4). For isp(4), which aborts them
implicitly, this change should be irrelevant.
MFC after: 2 weeks
Report UNMAP granularity as stripesize/-offset if we have no other values
to report there.
Add new quirk DA_Q_STRICT_UNMAP for cases when target is too critical to
misaligned UNMAP request, reporting errors instead of being suboptimal.
Setting this quirk makes da periph to forcefully align all UNMAP requests
to avoid those errors by the cost of some odd ranges not being UNMAP'ed.
This makes UNMAP usable within VMware 6.x VMs, just now 100% efficient.
MFC after: 2 weeks
For now it allows to unload CTL kernel module if there are no target-capable
SIMs in CAM. As next step full teardown of CAM targets can be implemented.
CAM_UNLOCKED is internal flag and cannot correctly be set by userland.
Return EINVAL from CAMIOCOMMAND and CAMIOQUEUE if it is set.
Also fix leaks in some of the error paths for CAMIOQUEUE.
PR: 215356
Reviewed by: ken, mav
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9869
The biggest change is that ctl_remove_initiator() now generates I_T NEXUS
LOSS event, cleaning part of LUs state related to the initiator.
MFC after: 2 weeks
If we asked to send sense data by setting CAM_SEND_SENSE, but SIM didn't
confirm transmission by setting CAM_SENT_SENSE, assume it was not sent.
Queue the I/O back to CTL for later REQUEST SENSE with ctl_queue_sense().
This is needed for error reporting on SPI HBAs like ahc(4)/ahd(4).
MFC after: 2 weeks
This code was disabled due to its high memory usage. But now we need this
functionality for cfumass(4) frontend, since USB MS BBB transport does not
support autosense.
MFC after: 2 weeks
When LUN is disabled, SIM starts returning queued ATIOs/INOTs. But at the
same time there can be some ATIOs/INOTs still carrying real new requests.
If we free those, SIM may leak some resources, forever expecting for any
response from us. So try to be careful, separating ATIOs/INOTs carrying
requests which still must be processed, from ATIOs/INOTs completed with
errors which can be freed.
MFC after: 2 weeks
Before this change XCOPY code could allocate memory in chunks up to 16-32MB
(VMware does XCOPY in 4MB chunks by default), that could be difficult for
VM subsystem to do due to KVA fragmentation, that sometimes created huge
allocation delays, blocking any I/O for respective LU for that time.
This change limits allocations down to TPC_MAX_IO_SIZE, which is 1MB now.
1MB is also not a cookie, but ZFS also can do that for large blocks, so
it should be less dramatic. As drawback this increases CPU overhead, but
it still look acceptable comparing to time consumed by ZFS read/write.
MFC after: 1 week
sys/cam/ctl/ctl.c:
In ctl_datamove(), inside CTL_IO_DELAY, add a lun variable and fill
it in before trying to dereference it.
MFC after: 3 days
Sponsored by: Spectra Logic
Before this change MaxCmdSN was reported as CmdSN + delta, that made it
limit number of requests in transmission from the initiator to target,
that was pretty useless. After this change MaxCmdSN limits number of
requests queued to CTL, i.e. maximal queue depth for the initiator.
The default limit is 256 outstanding requests per initiator at a time.
This code uses existing cs_outstanding_ctl_pdus counter to track queue
depth. It's semantics doen't perfectly match, but close enough to not
add another counter. Just don't set the maxtags below 2.
MFC after: 2 weeks
all of them in terms of an sbuf-based back-end, xpt_path_sbuf. This
unifies the implementation, but more importantly it stops the output
fropm being split between 4 or more invocations of printf. The
multiple invocations cause interleaving of the messages on the
console during boot, making the output of disk discovery often
unintelligible. This change helps a lot, but more work is needed.
Reviewed by: ken, mav
Sponsored by: Netflix
If "capacity" LU option is set, ramdisk backend now implements featured
thin provisioned disk, storing data in malloc(9) allocated memory blocks
of pblocksize bytes (default PAGE_SIZE or 4KB). Additionally ~0.2% of LU
size is used for indirection tree (bigger pblocksize reduce the overhead).
Backend supports all unmap and anchor operations. If configured capacity
is overflowed, proper error conditions are reported.
If "capacity" LU option is not set, the backend operates mostly the same
as before without allocating real storage: writes go to nowhere, reads
return zeroes, reporting that all LBAs are unmapped.
This backend is still mostly oriented on testing and benchmarking (it is
still a volatile RAM disk), but now it should allow to run real FS tests,
not only simple dumb dd.
MFC after: 2 weeks
It is only a first step and not perfect, but better then nothing.
The main blocker is CAM target frontend, that can not be unloaded,
since CAM does not have mechanism to unregister periph driver now.
MFC after: 2 weeks
The length of the scsi_set_timestamp_parameters struct was incorrect. LTO-5
drives don't care, but LTO-7 drives do.
Reviewed by: Sam Klopsch
MFC after: 2 weeks
Sponsored by: Spectra Logic Corp
This field has no practical use and never readed. Initiators already
receive respective residual size from frontends. Removed field had
different semantics, which looks useless, and was never passed through
by any frontend.
While there, fix kern_data_resid field support in case of HA, missed in
r312291.
MFC after: 13 days
It seems like kern_data_resid was never really implemented. This change
finally does it. Now frontends update this field while transferring data,
while CTL/backends getting it can more flexibly handle the result.
At this point behavior should not change significantly, still reporting
errors on write overrun, but that may be changed later, if we decide so.
CAM target frontend still does not properly handle overruns due to CAM API
limitations. We may need to add some fields to struct ccb_accept_tio to
pass information about initiator requested transfer size(s).
MFC after: 2 weeks
Replace archaic "busses" with modern form "buses."
Intentionally excluded:
* Old/random drivers I didn't recognize
* Old hardware in general
* Use of "busses" in code as identifiers
No functional change.
http://grammarist.com/spelling/buses-busses/
PR: 216099
Reported by: bltsrc at mail.ru
Sponsored by: Dell EMC Isilon
Instead of collecting statistics for each combination of ports and logical
units, that consumed ~45KB per LU with present number of ports, collect
separate statistics for every port and every logical unit separately, that
consume only 176 bytes per each single LU/port. This reduces struct
ctl_lun size down to just 6KB.
Also new IOCTL API/ABI does not hardcode number of LUs/ports, and should
allow handling of very large quantities.
MFC after: 2 weeks (probably keeping old API enabled for some time)
This array takes 64KB of RAM now, that was more then half of struct ctl_lun
size. If at some point we support more ports, this may need another tune.
MFC after: 2 weeks
The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".
This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.
PR: 215474
Reported by: Coverity
CID: 1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID: 1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID: 1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID: 1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID: 1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID: 1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID: 1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by: imp, sephe, slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9037
Differential Revision: https://reviews.freebsd.org/D9038
observed to fix any actual error, but it's the right thing to do
from the correctness point of view.
Tested by: Eugene M. Zheganin <emz at norma.perm.ru>
MFC after: 1 month
- Since I/Os are allocates from per-port pools, make allocations store
pointer to CTL softc there, and use it where needed instead of global.
- Created bunch of helper macros to access LUN, port and CTL softc.
MFC after: 2 weeks
We do not have non-volatile memory to really save those values, so we
neither report nor support this capability. Also saved mode pages are
not replicated between HA peers now.
MFC after: 2 weeks
Those two values are not directly related, so make them independent.
This does not change any limits immediately, but makes number of LUNs
per port controllable via tunable/sysctl kern.cam.ctl.lun_map_size.
After this change increasing CTL_MAX_LUNS should be pretty cheap,
and even making it tunable should be easy.
MFC after: 2 weeks
For EXTENDED COPY:
- improve parameters checking to report some errors before copy start;
- forward sense data from copy target as descriptor in case of error;
- report which CSCD reported error in sense key specific information.
For WRITE USING TOKEN:
- pass through real sense data from copy target instead of reporting
our copy error, since for initiator its a "simple" write, not a copy.
MFC after: 2 weeks
- Allow maximal sense size limitation via Control Extension mode page.
- When sense size limited, include descriptors atomically: whole or none.
- Set new SDAT_OVFL bit if some descriptors don't fit the limit.
- Report real written sense length instead of static maximal 252 bytes.
MFC after: 2 weeks
VMware tries to enable this bit to avoid multiple threshold notifications
in case of multiple initiators connected to the same LUN. Unfortunately
their code sends MODE SELECT(6) request with parameter length hardcoded
for the page without any thresholds. Since we have four threshold and our
page is bigger, this attempt fails, that is correct in my understanding.
So all we can do about this now is to report proper error code and hope
VMware fix their code one day.
MFC after: 2 weeks
for INFORMATION field fit into available 4 bytes (has no non-zero bytes
except last 4), as explicitly required by SPC-5 specification.
MFC after: 2 weeks
While CTL still has no real events to report in this way (like SMART),
it is possible to trigger false event by manually setting TEST bit in
Informational Exceptions Control mode page, that can be useful for
initiator testing. This code supports all flavours of IE reporting:
UNIT ATTENTION, RECOVERED ERROR and NO SENSE sense keys, REQUEST SENSE
command and Informational Exceptions log page.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Under kern.cam we have certain sysctls that are per-device, such as the
ones under kern.cam.ada.[0-9]+.*. Add a "device_index" label annotation
to such sysctls, so that the Prometheus metrics exporter will give all
of those metrics the same name. The device number will be added to the
metric name as the "device_index" label.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
This adds support to camcontrol(8) and libcam(3) for getting and setting
the time on SCSI protocol drives. This is more commonly found on tape
drives, but is a SPC (SCSI Primary Commands) command, and may be found
on any device that speaks SCSI.
The new camcontrol timestamp subcommand allows getting the current device
time or setting the time to the current system time or any arbitrary time.
sbin/camcontrol/Makefile:
Add timestamp.c.
sbin/camcontrol/camcontrol.8:
Document the new timestamp subcommand.
sbin/camcontrol/camcontrol.c:
Add the timestamp subcommand to camcontrol.
sbin/camcontrol/camcontrol.h:
Add the timestamp() function prototype.
sbin/camcontrol/timestamp.c:
Timestamp setting and reporting functionality.
sys/cam/scsi/scsi_all.c:
Add two new CCB building functions, scsi_set_timestamp() and
scsi_report_timestamp(). Also, add a new helper function,
scsi_create_timestamp().
sys/cam/scsi/scsi_all.h:
Add CDB and parameter data for the the set and report timestamp
commands.
Add function declarations for the new CCB building and helper
functions.
Submitted by: Sam Klopsch
Sponsored by: Spectra Logic
MFC After: 2 weeks
- On control request update all status pages, since they may also be
affected if user enables/disables enclosure slots.
- Periodically update element descriptors too, since there is some
hardware where they are changed dynamically.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
A bug in CAM's serial number hash logic resulted in SATA drives behind a SAS
controller getting removed and readded anytime the drive was rescanned for
any reason.
PR: 212914
Submitted by: kadesai
Reported by: kadesai
Reviewed by: asomers, ken
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
The BUF_TRACKING bio pointer only makes sense for kernel consumers of
CCBs.
PR: 214250
Reported by: trasz@
Reviewed by: imp@, markj@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8477
It was added in SES-3 spec, and its support required to properly link
the Additional Element Status page data to the original elements.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
is not going to recover until the system is reset. Treat it as a special
case and don't allow it to fall through to quasi-success.
Reviewed by: ken, imp
Obtained from: Netflix
MFC after: 3 days
the components are reset). Therefore retries are pointless. This is very
visible in SATL systems, for example an LSI SAS controller and a SATA HDD/SSD.
Reviewed by: ken
Obtained from: Netflix
MFC after: 3 days
be accessed by root. It uses unsigned ints instead of size_t
to preserve the ABI.
PR: 207627
Submitted by: ryan@ryanday.net (with slight tweaks)
MFC after: 1 month
Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code.
This can be handy in tracking down what code touched hung bios and bufs
last. The full history is especially useful, but adds enough bloat that
it shouldn't be enabled in release builds.
Function names (or arbitrary string constants) are tracked in a
fixed-size ring in bufs. Bios gain a pointer to the upper buf for
tracking. SCSI CCBs gain a pointer to the upper bio for tracking.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8366
Previously pass driver just ignored the flag, making random kernel code
access user-space pointer, sometime causing crashes even for correctly
written applications if user-level context was switched or swapped out.
This patch tries to copyin the CDB into kernel space to avoid it.
MFC after: 2 weeks
If device reservation was preempted by other initiator, our sync request
will always fail. Without this change CAM tried to sync cache on every
following device close, including numerous GEOM tasting opens/closes,
causing lots of useless noise in logs.
While there, increase SYNCHRONIZE CACHE timeout to default value.
MFC after: 2 weeks
CTL itself has no limits on on UNMAP and WRITE SAME sizes. But depending
on backends large requests may take too much time. To avoid that new
configuration options allow to hint initiator maximal sizes it should not
exceed.
MFC after: 2 weeks
KASSERT in cam_ccbq_insert_ccb that only XPT_FC_QUEUED ops are queued,
and XPT_FC_USER_CCB ops are not. Otherwise cam_ccbq_ccb_done may be
skipped.
Bounds check the index used for camq_remove in order to panic instead
of scribble on removal of an out-of-bounds index (e.g. consider the
effect of camq_remove of CAM_UNQUEUED_INDEX).
KASSERT in cam_ccbq_remove_ccb that the ccb removed by index was the
one sought.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: imp, mav
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8151
In cam_periph_runccb, cam_periph_ccbwait was using the value of the ccb
pinfo.index and status fields to determine whether the ccb was done,
but these fields are updated without a contending lock and could glitch
into states that would be erroneously interpreted as done. Instead,
have cam_periph_ccbwait look for the explicit result of the function
cam_periph_done.
Submitted by: Ryan Libby <rlibby@gmail.com>
Reviewed by: mav
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8020
we have queued up normaliazed to the queue size. Also compute buckets
of latency to help compute, in userland, estimates of Median, P90, P95
and P99 values.
Sponsored by: Netflix, Inc
This eventhandler is mainly used by VMs, e.g. Hyper-V, whose disk
controllers share the disks with the simulated ATA controllers.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Discussed with: mav
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7693
Some statuses, such as "ATA pass through information available", are part
part of absolutely normal operation and do not worth reporting.
MFC after: 2 weeks
Decouple the send and receive limits on the amount of data in a single
iSCSI PDU. MaxRecvDataSegmentLength is declarative, not negotiated, and
is direction-specific so there is no reason for both ends to limit
themselves to the same min(initiator, target) value in both directions.
Allow iSCSI drivers to report their send, receive, first burst, and max
burst limits explicitly instead of using hardcoded values or trying to
derive all of them from the receive limit (which was the only limit
reported by the drivers prior to this change).
Display the send and receive limits separately in the userspace iSCSI
utilities.
Reviewed by: jpaetzel@ (earlier version), trasz@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7279
[set] notation. This fixes pattern matching for recently added drives
that would set the NCQ Trim being broken incorrectly.
PR: 210686
Tested-by: Tomoaki AOKI
MFC After: 3 days
Uses of commas instead of a semicolons can easily go undetected. The comma
can serve as a statement separator but this shouldn't be abused when
statements are meant to be standalone.
Detected with devel/coccinelle following a hint from DragonFlyBSD.
MFC after: 1 month
per-protocol. This reduces the number scsi symbols references by
cam_xpt significantly, and eliminates all ata / nvme symbols. There's
still some NVME / ATA specific code for dealing with XPT_NVME_IO and
XPT_ATA_IO respectively, and a bunch of scsi-specific code, but this
is progress.
Differential Revision: https://reviews.freebsd.org/D7289
eliminates the need to special case everything in cam_xpt for new
transports. It is now a failure to not have a transport object when
registering the bus as well. You can still, however, create a
transport that's unspecified (XPT_)
Differential Revision: https://reviews.freebsd.org/D7289
cam_periph_releaes_locked() at the end of nvme_probe_start because we
hit an assertion which may be bogus. Instead, leak a periph until we
sort it out. Since these devices don't arrive and depart often, so
this is the lessor of two evils.
MFC after: 1 week
In the case where cam_iosched_init() fails, the ada and da softcs were leaked.
Instead, free them.
Reported by: Coverity
CID: 1356039
Sponsored by: EMC / Isilon Storage Division
sys/cam/scsi/scsi_xpt.c
Strip leading spaces off of a SCSI disk's reported serial number
when populating the CAM serial number. This affects the output of
"diskinfo -v" and the names of /dev/diskid/DISK-* device nodes,
among other things.
SPC5r05 says that the Product Serial Number field from the Unit
Serial Number VPD page is right-aligned. So any leading spaces are
not part of the actual serial number. Most devices don't left-pad
their serial numbers, but some do. In particular, the SN VPD page
that an LSI HBA emulates for a SATA drive contains enough
left-padding to fill a 20-byte field.
UPDATING
Add a note to UPDATING, because some users may have to update
/etc/fstab or geom labels.
Reviewed by: ken, mav
MFC after: Never
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6516
o Some Samsung drives do not support the ATA READ LOG EXT or READ
LOG DMA EXT commands, despite indicating that they do in their
IDENTIFY data. So, fix this in two ways:
1. Only start the log directory probe (ADA_STATE_LOGDIR) if
the drive claims to be an SMR drive in the first place.
We don't need to do the extra probing for other devices.
This will also serve to prevent problems with other
drives that have the same issue.
2. Add quirks for the two Samsung drives that have been
reported so far (thanks to Oleg Nauman and Alex Petrov).
If there is a reason to do a Read Log later on, we will
know that it doesn't work on these drives.
o Add a quirk entry to mark Seagate Lamarr Drive Managed drives as
drive managed. They don't report this in their Identify data.
sys/cam/ata/ata_da.c:
Add two new quirks:
1. ADA_Q_LOG_BROKEN, for drives that claim to support Read
Log but don't really.
2. ADA_Q_SMR_DM, for drives that are Drive Managed SMR, but
don't report it. This can matter for software that
wants to know when it should make an extra effort to
write sequentially.
Record two Samsung drives that don't support Read Log, and
one Seagate drive that doesn't report that it is a SMR drive.
The Seagate drive is already recorded in the da(4) driver.
We may have to come up with a similar solution in the da(4)
driver for SATA drives that don't properly support Read Log.
In adasetflags(), Dont' set the ADA_FLAG_CAN_LOG bit if the
device has the LOG_BROKEN quirk set. Also, look at the
SMR_DM quirk and set the device type accordingly if it is
actually a drive managed drive.
When deciding whether to go into the LOGDIR probe state,
look to see whether the device claims to be an SMR device.
If not, don't bother with the LOGDIR probe state.
Sponsored by: Spectra Logic
The currently used idiom for clearing the part of a ccb after its
header generates one or two Coverity errors for each time it is
used. All instances generate an Out-of-bounds access (ARRAY_VS_SINGLETON)
error because of the treatment of the header as a two element array,
with a pointer to the non-existent second element being passed as
the starting address to bzero(). Some instances also alsp generate
Out-of-bounds access (OVERRUN) errors, probably because the space
being cleared is larger than the sizeofstruct ccb_hdr).
In addition, this idiom is difficult for humans to understand and
it is error prone. The user has to chose the proper struct ccb_*
type (which does not appear in the surrounding code) for the sizeof()
in the length calculation. I found several instances where the
length was incorrect, which could cause either an actual out of
bounds write, or incompletely clear the ccb.
A better way is to write the code to clear the ccb itself starting
at sizeof(ccb_hdr) bytes from the start of the ccb, and calculate
the length based on the specific type of struct ccb_* being cleared
as specified by the union ccb member being used. The latter can
normally be seen in the nearby code. This is friendlier for Coverity
and other static analysis tools because they will see that the
intent is to clear the trailing part of the ccb.
Wrap all of the boilerplate code in a convenient macro that only
requires a pointer to the desired union ccb member (or a pointer
to the union ccb itself) as an argument.
Reported by: Coverity
CID: 1007578, 1008684, 1009724, 1009773, 1011304, 1011306
CID: 1011307, 1011308, 1011309, 1011310, 1011311, 1011312
CID: 1011313, 1011314, 1011315, 1011316, 1011317, 1011318
CID: 1011319, 1011320, 1011321, 1011322, 1011324, 1011325
CID: 1011326, 1011327, 1011328, 1011329, 1011330, 1011374
CID: 1011390, 1011391, 1011392, 1011393, 1011394, 1011395
CID: 1011396, 1011397, 1011398, 1011399, 1011400, 1011401
CID: 1011402, 1011403, 1011404, 1011405, 1011406, 1011408
CID: 1011409, 1011410, 1011411, 1011412, 1011413, 1011414
CID: 1017461, 1018387, 1086860, 1086874, 1194257, 1229897
CID: 1229968, 1306229, 1306234, 1331282, 1331283, 1331294
CID: 1331295, 1331535, 1331536, 1331539, 1331540, 1341623
CID: 1341624, 1341637, 1341638, 1355264, 1355324
Reviewed by: scottl, ken, delphij, imp
MFH: 1 month
Differential Revision: https://reviews.freebsd.org/D6496
I broke broke the quirk in the ada(4) driver disabling NCQ trim support
in revision 300207. The support flags were set before the quirks were
loaded.
sys/cam/ata/ata_da.c:
Call adasetflags() after loading quirks, so that we'll set the
flags accurately.
Sponsored by: Spectra Logic
utilizing previously unused arg field of struct ccb_notify_acknowledge.
This makes new QUERY TASK, QUERY TASK SET and QUERY ASYNC EVENT requests
really functional for CAM target mode drivers.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.
This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).
This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)
Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.
Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.
Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.
Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.
Thanks to Seagate for supplying the test hardware and answering questions.
sbin/camcontrol/Makefile:
Add epc.c and zone.c.
sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.
sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.
Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.
Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.
sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype
Add get_ata_status(), zone(), and epc().
sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).
The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.
sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.
sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).
These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)
This includes support for all commands defined in the ZBC and
ZAC specs.
sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().
Add a new CCB building function, ata_read_log().
Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.
sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().
sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.
Add four new probe states to gather information needed for zone
support.
Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.
Add new sysctl variables that describe zone support and paramters.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.
Add descriptions for ZBC Host Managed devices.
Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).
Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().
Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.
sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.
Add Zoned Block Device Characteristics VPD page.
Add ATA Return SCSI sense descriptor.
Add prototypes for scsi_ata_read_log() and scsi_ata_pass().
sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.
Add five new probe states, four of which are needed for ATA
devices.
Add five new sysctl variables that describe zone support and
parameters.
The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.
Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.
sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.
Add SCSI Report Zones data structures.
Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.
sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.
ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.
But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.
In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.
sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.
sys/geom/geom.h:
Add g_io_zonecmd() prototype.
sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.
sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.
sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.
sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.
Add permissions check for BIO_ZONE commands.
Add command decoding for BIO_ZONE commands.
sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.
sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.
sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.
sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.
sys/sys/disk.h:
Define the DIOCZONECMD ioctl.
sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.
This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.
sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.
usr.sbin/Makefile:
Add the zonectl utility.
usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.
usr.sbin/zonectl/Makefile:
Add zonectl makefile.
usr.sbin/zonectl/zonectl.8
zonectl(8) man page.
usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)
There were at least two places where M_NOWAIT was used without NULL check.
This change should fix NULL-dereference panic there and possibly improve
operation in other ways under memory pressure.
MFC after: 2 weeks
This makes it possible to manually force updating capacity data
after the disk got resized. Without it it might be neccessary to
reboot before FreeBSD notices updated disk size under eg VMWare.
Discussed with: imp@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6108
Although usually small, values produced by nitems() are unsigned.
By unsigning the corresponding indexes we avoid signed vs unsigned
comparisons. This may have some effect on performance, although given the
small sizes the effect will not be perceivable and it makes the code
clearer.
can handle it, and add the code to add it to the FIS that's sent to
the drive. The mvs driver is the only other ATA driver in the system,
and its hardware doesn't appear to support setting the Auxiliary
register.
Differential Revision: https://reviews.freebsd.org/D5598
transactions, but that value isn't used. It's bogusly used to report
in devstat, due to a cut and paste error from SCSI. Mark it as unused
in cam_fill_ataio. Reclaim the memory as a new ata_flags. In addition,
tag_id and init_id are completely unused, so reclaim those as 'unused'
now too. These were needlessly copied when ata was split from scsi.
This allows us, in the future, to create structures that can
communicate AUXILIARY regsiter to the SIMs, which cannot be done now.
Differential Revision: https://reviews.freebsd.org/D5598
* Samsung 843T Series SSDs (MZ7WD*)
* Samsung PM851 Series SSDs (MZ7TE*)
* Samsung PM853T Series SSDs (MZ7GE*)
as known having broken NCQ TRIM support as they appear to be based on
the same controller technology as the 840 and 850 series.
I've had at least one report of the PM853 being broken, so err on the
side of caution for the above drives. The PM863/SM863 appears to be
based on a newer controller, so give it the benefit of the doubt.
2015). Correct the M500 firmware versions. EU07 was the engineering
test version, not the release version with the fix. MU07 is the
release version. It's the only Micron firmware version to actually
work. Remove support for EU07.
This brings the blacklist into parity with the Linux blacklist as of
4.5, except for the Micron M500 MU07 entry. I personally tested the
MU07 firmware on 12 machines running 6 drives each with no corruption
in the past 6 months with Netflix production loads. Prior versions of
the M500 firmware wouldn't last more than a few days.
Sponsored by: Netflix, Inc.
periph level. When a relevant error is reported to the periph, some
amplifying information is gathered, and the error and information are fed
to devctl with the attributes / keys system=CAM, subsystem=periph. The
'type' key will be either 'error' or 'timeout', and based on this, various
other keys are also populated.
The purpose of this is to provide a concise mechanism for error reporting
that is less noisy than the system console but higher in resolution and
fidelity than simple sysctl counters. We will be using it at Netflix to
populate a structured log and database to track errors and error trends
across our world-wide population of drives.
Submitted by: imp, scottl
Approved by: kenm
MFC after: 3 days
Sponsored by: Netflix
Differential Revision: D5943
as before. The common scheduling bits have moved from inline code in
each of the CAM periph drivers into a library that implements the
default scheduling.
In addition, a number of rate-limiting and I/O preference options can
be enabled by adding CAM_IOSCHED_NETFLIX to your config file. A number
of extra stats are also maintained. CAM_IOSCHED_NETFLIX isn't on by
default because it uses a separate BIO_READ and BIO_WRITE queue, so
doesn't honor BIO_ORDERED between these two types of operations. We
already didn't honor it for BIO_DELETE, and we don't depend on
BIO_ORDERED between reads and writes anywhere in the system (it is
currently used with BIO_FLUSH in ZFS to make sure some writes are
complete before others start and as a poor-man's soft dependency in
one place in UFS where we won't be issuing READs until after the
operation completes). However, out of an abundance of caution, it
isn't enabled by default.
Plus, this also brings in NCQ TRIM support for those SSDs that support
it. A black list is also provided for known rogues that use NCQ trim
as an excuse to corrupt the drive. It was difficult to separate out
into a separate commit.
This code has run in production at Netflix for over a year now.
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D4609
_string variants on top of this. This requires a change to the function
signature of ata_res_sbuf(). Its use in the tree seems to be very limited,
and the change makes it more consistent with the rest of the API.
Reviewed by: imp, mav, kenm
Sponsored by: Netflix
Differential Revision: D5940
Improve over the solution in r297527:
Instead of attempting to initialize all the possible cases, just
move the check nearer to the case where it makes sense.
CID: 1006486
Reviewed by: ken
MFC after: 2 weeks
If there is an error different from ERESTART, there is some
chance that we may end up accessing an uninitialized value. This
doesn't seem likely/possible but initialize announce_buf[0],
just in case.
CID: 1006486
