No behavioral changes, just cosmetics.
A partition number of zero is not a wildcard, it's the 'a' partition in
a BSD slice, so don't print it as "<auto>". (Only slices are 1-based,
unit and partition numbers are 0-based and -1 is their wildcard marker.)
Also, after doing all the probing and choosing, print the final result as
"Booting from <disk spec>" where disk spec has all the wildcards resolved
and looks like familiar BSD slice-and-partition notation (disk0s3a, etc).
While later firmware always registers for RSCN requests, older one does
it only in initiator mode. But in target mode there RSCN can be the only
way to detect gone intiator.
The r289895 revision did not accounted for the block containing the
requested page, when calculating the run of pages. Include the pages
before/after the requested page, that fit into the reqblock, into the
calculation.
Noted by: glebius
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
tty.c Rev. 1.3
Avoid unintended problems with operator precedence when doing an
assignment and comparison.
bc.1, Rev. 1.31, 1.32
'.Ql Quit' -> '.Ql quit' because only the lowercase command is valid.
Clarify sentence about `quit` in BUGS section.
extern.h, Rev. 1.12
whitespace
bc.y, Rev. 1.47
Prefer setvbuf() to setlinebuf() for portability
Obtained from: OpenBSD
MFC after: 2 weeks
Summary:
* Take advantage of NEW_PCIB to remove a lot of setup code.
* Fix some bugs related to multiple PCI bridges.
There's still room for more cleanup, and still some bugs leftover, but this
cleans up a lot.
Test Plan: Tested on P5020 board with IDT PCIe switch.
Differential Revision: https://reviews.freebsd.org/D4127
(opens, locks, etc) is retained, which I believe is correct behaviour.
However, for NFSv4.1, the server also retained a reference to the xprt
(RPC transport socket structure) for the backchannel. This caused
svcpool_destroy() to not call SVC_DESTROY() for the xprt and allowed
a socket upcall to occur after the mutexes in the svcpool were destroyed,
causing a crash.
This patch fixes the code so that the backchannel xprt structure is
dereferenced just before svcpool_destroy() is called, so the code
does do an SVC_DESTROY() on the xprt, which shuts down the socket upcall.
Tested by: g_amanakis@yahoo.com
PR: 204340
MFC after: 2 weeks
of the SRS (software reset) bit in the watchdog control register. Despite
what the manual seems to imply, this bit DOES trigger an immediate reset, as
opposed to simply flagging the type of reset as software-triggered.
For those chips we are not receiving login events, adding initiators
based on ATIO requests. But there is no port ID in that structure, so
in fabric mode we have to explicitly fetch it from firmware to be able
to do normal scan after that.
created for bus_dma_tag_t tag, bounce pages should be allocated
only if needed.
Before the fix, they were allocated always if BUS_DMA_COULD_BOUNCE flag
was set but BUS_DMA_MIN_ALLOC_COMP not. As bounce pages are never freed,
it could cause memory exhaustion when a lot of such tags together with
their maps were created.
Note that there could be more maps in one tag by current design.
However BUS_DMA_MIN_ALLOC_COMP flag is tag's flag. It's set after
bounce pages are allocated. Thus, they are allocated only for first
tag's map which needs them.
Approved by: kib (mentor)
is so unusual. Turn off mis-match warnings for building uathload
because the firmware .o file is produced in a way that we
can't get to match exactly. This fixes the build on mips,
so stop excluding it from the build.
sesX device number may change between reboots, so to properly identify
the instance we need more data. Name and ID reported here may mach ones
reported by SCSI device, but that is not really required by specs.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
sizeof(unsigned long) < sizeof(vm_paddr_t) on Book-E, which uses 36-bit
addressing. With this, a CCSR with a physical address above 4GB successfully
maps.
Sponsored by: Alex Perez/Inertial Computing
Since r289279 bufinit() uses mp_ncpus so adapt to what x86 does and
set this variable already in cpu_mp_setmaxid().
While at it, rename cpu_cpuid_prop() to cpu_portid_prop() as well as
the MD cpuid variable to portid to avoid confusion with the MI use
of "cpuid" and make some variable static/global in order to reduce
stack usage.
PR: 204685
the map has been created via bounce_bus_dmamem_alloc(). In that case
bus_dmamap_unload(9) typically isn't called during normal operation
but still should be during detach, cleanup from failed attach etc.
Submitted by: yongari
MFC after: 3 days
Extended memory here is "physical memory above 256MB".
"memsize" in the environment only grows to 256MB; "ememsize" is the entire
memory range. Extended memory shows up at physical address 0x90000000.
This allows for malta64 VMs to be created with > 256MB RAM, all the way
up to 2GB RAM.
Tested:
* qemu-devel package; qemu-system-mips64 -m 2048 (and -m 256 to test the
no-ememsize case.)
TODO:
* testing mips32 with > 256MB RAM.
Reviewed by: imp
At this time I cannot see a way to fix directory caching when it
has partial blocks in the buffer cache, due to the fact that the
syscall's uio_offset won't stay the same as the lblkno * NFS_DIRBLKSIZ
offset.
Reported by: bde
MFC after: 2 weeks
While those tools are not needed anymore they are necessary to build FreeBSD 9
and 10. it does not hurt to keep those tools around until both 9 and 10 branch
become EOLed.
Modify colldef(1) to build after the change in the collation header, and ensure
it does produce the same collation definition it used to generate for 9 and 10
Reported by: Oliver Pinter
Move fdopen() up near other resource allocation like malloc(); do proper
deallocation on failure later on in the function.
Submitted by: Ramachandra Topannavar <rtopannavar@panasas.com>
Reviewed by: jilles
Approved by: jhb (mentor)
MFC after: 2 weeks
Sponsored by: Panasas, Inc.
Differential Revision: https://reviews.freebsd.org/D4126
M lib/libc/gen/popen.c
