This is a simple ioctl and mmap API to issue SPI transactions from
userland. It's useful for simple devices (eg spi temperature sensors,
etc) for experimentation.
TODO:
* Write some documentation!
Submitted by: green
of hardware. Mostly this focuses on the big changes needed for setting the
bus clock, because ESDHC is SDHCI v2.0 and USDHC is 3.0, and the number,
location, and interpretation of clock divisor bits is vastly different
between the two. This doesn't get the device all the way to functioning
on ESDHC hardware yet, but it's much closer, now getting through all the
card detection and negotiation of capabilties and speed (but it eventually
hangs on what appears to be a missing interrupt).
Another missing chunk of code for handling ESDHC's 32 bit command-and-mode
register using sdhci's pair of 16 bit writes is added.
This also does some leading whitespace cleanups and sorts some softc
struct members by size, and adds some comments (because when do I ever
touch code without adding comments?).
This was triggering a panic on detach; the SPROM shadow is now
maintained by the bhnd_sprom_chipc driver, and should be removed
from chipc.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6548
This adds support for automatically configuring bhnd_chipc bus children
with associated resources, using an internal 'hints' table based directly
on Michael Zhilin's chipc resource mapping work.
The bhnd_sprom_chipc driver has been converted to use DEVICE_IDENTIFY()
with the new resource table.
This should be nearly drop-in compatible with the child device drivers
in D6250.
Submitted by: Landon Fuller <landonf@landonf.org>
Reviewed by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6525
to match the new state of affairs. The hardware we support has always been
able to do unaligned accesses, we've just never enabled it until now.
This brings FreeBSD into line with all the other major OSes, and should help
with the growing volume of 3rd-party software that assumes unaligned access
will just work on armv6 and armv7.
* include the SCTP common header, if possible
* include the first 8 bytes of the INIT chunk, if possible
This provides the necesary information for the receiver of the ICMP
packet to process it.
MFC after: 1 week
This fixes a EFI/PE header issue that prevented elfcopy-produced .efi
files from working with Secure Boot:
Make sure section raw size is always padded to multiple of
FileAlignment from the optional header, as requested by the PE
specification. This change should reduce the diff between PE image
generated by Binutils objcopy and elftoolchain elfcopy.
Submitted by: kaiw
Reported by: ambrisko
have ACLE support built in. The ACLE (ARM C Language Extensions) defines
a set of standardized symbols which indicate the architecture version and
features available. ACLE support is built in to modern compilers (both
clang and gcc), but absent from gcc prior to 4.4.
ARM (the company) provides the acle-compat.h header file to define the
right symbols for older versions of gcc. Basically, acle-compat.h does
for arm about the same thing cdefs.h does for freebsd: defines
standardized macros that work no matter which compiler you use. If ARM
hadn't provided this file we would have ended up with a big #ifdef __arm__
section in cdefs.h with our own compatibility shims.
Remove #include <machine/acle-compat.h> from the zillion other places (an
ever-growing list) that it appears. Since style(9) requires sys/types.h
or sys/param.h early in the include list, and both of those lead to
including cdefs.h, only a couple special cases still need to include
acle-compat.h directly.
Loves it: imp
Check that the dirlist path string specification does not cause
overflow and is fully contained in the hints file.
Check that the dirlist string is nul-terminated.
Make 'hdr' static variable, so that hdr.dirlistlen is available when
hints cached value is used on next function calls. Reset hdr.dirlistlen
to zero if error was detected, so that allocations use reasonable size.
Use 'hints', and not 'p' in the body, since p is only initialized on the
first call.
Reported and reviewed by: truckman (previous version)
Sponsored by: The FreeBSD Foundation
CIDs: 1006503, 1006504, 1006676, 1008488, 1007263
MFC after: 2 weeks
defects. When shifting an unsigned byte into the upper 8 bits of
an int and the resulting value is greater than 0x7FFFFFF, the result
will be sign extended when converting to a 64 bit unsigned long.
Fix by casting to (uint64_t) before the shift.
Reported by: Coverity
CID: 1356044, 1356045
Reviewed by: ken
overflow defect. Use the new CCB_CLEAR_ALL_EXCEPT_HDR() macro
instead of the calling bzero() on the pointer to the header used
as an array and indexed by 1.
Don't leak a buffer after executing "goto restart_report" by
overwriting its pointer with the results of another calloc().
Be sure to clear the buffer before reusing it. (CID 1356042)
Reported by: Coverity
CID: 1356022, 1356034, 1356023, 1356035, 1356042
Reviewed by: ken
Summarizing the findings in the OpenBSD list:
This solves a reproduceable issue with very recent Mesa where REG_NOTBOL
combined with a match at the begin of the string causes our regex library
to treat the word as not begin of word.
Thanks to Martijn van Duren and Ingo Schwarze for taking the time to
solve this in the least invasive way.
PR: 209352, 209387
Taken from: openbsd-tech (Martijn van Duren)
MFC after: 1 month
Change the behavior of when REG_STARTEND is combined with REG_NOTBOL.
From the original posting[1]:
"Enable the assumption that pmatch[0].rm_so is a continuation offset
to a string and allows us to do a proper assessment of the character
in regards to it's word position ('^' or '\<'), without risking going
into unallocated memory."
This change makes us similar to how glibc handles REG_STARTEND |
REG_NOTBOL, and is closely related to a soon-to-land fix to sed.
Special thanks to Martijn van Duren and Ingo Schwarze for working
out some consistent behaviour.
Differential Revision: https://reviews.freebsd.org/D6257
Taken from: openbsd-tech 2016-05-24 [1] (Martijn van Duren)
Relnotes: yes
MFC after: 1 month
Bool module parameters are no longer supported, because there is no
equivalent in FreeBSD.
There are two macros available which control the behaviour of the
LinuxKPI module parameters:
- LINUXKPI_PARAM_PARENT allows the consumer to set the SYSCTL parent
where the modules parameters will be created.
- LINUXKPI_PARAM_PREFIX defines a parameter name prefix, which is
added to all created module parameters.
Sponsored by: Mellanox Technologies
MFC after: 1 week
tunable SYSCTL's. Linux module parameters are associated with the
module they belong to. FreeBSD does not share this concept of a parent
module. Instead add macros which define the prefix to use for the
module parameters in the LinuxKPI consumers.
While at it convert all "bool" LinuxKPI module parameters to "byte"
type, because we don't have a "bool" type of SYSCTL in FreeBSD.
Sponsored by: Mellanox Technologies
MFC after: 1 week
run after a panic(). This for example allows a LinuxKPI based graphics
stack to receive prints during a panic.
Obtained from: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
The POSIX basename() function is allowed to modify its input buffer,
which means its argument is "char *". Pull a copy of the input string
before computing the base.
Reviewed by: jtl
Differential Revision: https://reviews.freebsd.org/D6465
Etherswitch support is built by default on all SoCs except RT3662/RT3883
as they have no built-in switch and their configurations with external
switches are not yet supported.
Sponsored by: Smartcom - Bulgaria AD
Currently all radiotap structures in ral(4) are packed, but are not
aligned, which causes ral based devices to crash when one does
'ifconfig wlan0 up' for a wlan interface with a ral wlandev on arches
that care about structure alignment (e.g., MIPS).
Adding an aligned attribute helps fix this problem and ral devices
can be properly brought up.
Reviewed by: adrian
Sponsored by: Smartcom - Bulgaria AD
