arm64 and riscv were only saving and restoring floating point
registers for sendsig() and sys_sigreturn(), but not for getcontext(),
setcontext(), and swapcontext().
While here, remove an always-false check for uap being NULL from
sys_sigreturn().
Reviewed by: br, mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23218
As part of the RISC-V ABI, the gp register is expected to initialized
with the address of __global_pointer$ as early as possible. This allows
loads and stores from .sdata to be relaxed based on the value of gp. In
locore.S we do this initialization twice, once each for va and mpva.
However, in both cases the initialization is preceded by an la
instruction, which in theory could be relaxed by the linker.
Move the initialization of gp to be slightly earlier (before la
cpu_exception_handler), and add an additional gp initialization at the
very beginning of _start, before virtual memory is set up.
Reported by: jrtc27
Reviewed by: jrtc27
Differential Revision: https://reviews.freebsd.org/D23139
as these functions should do zero-extend.
Discovered by running pci_read_cap(), and by hint from James Clarke.
Reviewed by: James Clarke <jrtc27@jrtc27.com>
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D23236
This is a follow up to r356481. In locore.S, before virtual memory is
set up, we should avoid using indirect address lookups through the GOT.
Therefore we need to convert uses of the la instruction to lla, which
always generates an auipc/addi pair of instructions. This conversion was
done for the BSP case, but not the AP case, resulting in a fault
somewhere before mpva and a failure to bring APs online.
Reported by: lwhsu
Reviewed by: lwhsu, jrtc27 (accepted in a comment)
Differential Revision: https://reviews.freebsd.org/D23138
lld on RISC-V is not yet able to handle undefined weak symbols for
non-PIC code in the code model (medany/medium) used by the RISC-V
kernel.
Both GCC and clang emit an auipc / addi pair of instructions to
generate an address relative to the current PC with a 31-bit offset.
Undefined weak symbols need to have an address of 0, but the kernel
runs with PC values much greater than 2^31, so there is no way to
construct a NULL pointer as a PC-relative value. The bfd linker
rewrites the instruction pair to use lui / addi with values of 0 to
force a NULL pointer address. (There are similar cases for 'ld'
becoming auipc / ld that bfd rewrites to lui / ld with an address of
0.)
To work around this, compile the kernel with -fPIE when using lld.
This does not make the kernel position-independent, but it does
force the compiler to indirect address lookups through GOT entries
(so auipc / ld against a GOT entry to fetch the address). This
adds extra memory indirections for global symbols, so should be
disabled once lld is finally fixed.
A few 'la' instructions in locore that depend on PC-relative
addressing to load physical addresses before paging is enabled have to
use auipc / addi and not indirect via GOT entries, so change those to
use 'lla' which always uses auipc / addi for both PIC and non-PIC.
Submitted by: jrtc27
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23064
Implement support for the UART as found on the SiFive FU540. It should
also work on, but has not been tested with, the FU310.
Reviewed by: philip
Sponsored by: Axiado
There's no point in checking for absent CPUs if we're not going to do anything
about either the present or absent case. This loop can just be removed.
Reviewed by: philip
Sponsored by: Axiado
With WITNESS enabled we see the following warning:
lock order reversal: (sleepable after non-sleepable)
1st 0xffffffd0847c7210 fu540spi0 (fu540spi0) @
/usr/home/kp/axiado/hornet-freebsd/src/sys/riscv/sifive/fu540_spi.c:297
2nd 0xffffffc00372bb30 Clock topology lock (Clock topology lock) @
/usr/home/kp/axiado/hornet-freebsd/src/sys/dev/extres/clk/clk.c:1137
stack backtrace:
#0 0xffffffc0002a579e at witness_checkorder+0xb72
#1 0xffffffc0002a5556 at witness_checkorder+0x92a
#2 0xffffffc000254c7a at _sx_slock_int+0x66
#3 0xffffffc00025537a at _sx_slock+0x8
#4 0xffffffc000123022 at clk_get_freq+0x38
#5 0xffffffc0005463e4 at __clzdi2+0x2bb8
#6 0xffffffc00014af58 at randomdev_getkey+0x76e
#7 0xffffffc0001278b0 at simplebus_add_device+0x7ee
#8 0xffffffc00027c9a8 at device_attach+0x2e6
#9 0xffffffc00027c634 at device_probe_and_attach+0x7a
#10 0xffffffc00027d76a at bus_generic_attach+0x10
#11 0xffffffc00014aab0 at randomdev_getkey+0x2c6
#12 0xffffffc00027c9a8 at device_attach+0x2e6
#13 0xffffffc00027c634 at device_probe_and_attach+0x7a
#14 0xffffffc00027d76a at bus_generic_attach+0x10
#15 0xffffffc000278bd2 at config_intrhook_oneshot+0x52
#16 0xffffffc000278b3e at config_intrhook_establish+0x146
#17 0xffffffc000278cf2 at config_intrhook_disestablish+0xfe
The clock topology lock can sleep, which means we cannot attempt to
acquire it while holding the non-sleepable mutex.
Fix that by retrieving the clock speed once, during attach and not every
time during SPI transaction setup.
Submitted by: kp
Sponsored by: Axiado
Due to clang and LLD's tendency to use a PLT for builtins, and as they
don't have full support for EABI, we sometimes have to deal with a PLT in
.ko files in a clang-built kernel.
As such, augment the in-kernel linker to support jump table processing.
As there is no particular reason to support lazy binding in kernel modules,
only implement Secure-PLT immediate binding.
As part of these changes, add elf_cpu_parse_dynamic() to the MD API of the
in-kernel linker (except on platforms that use raw object files.)
The new function will allow MD code to act on MD tags in _DYNAMIC.
Use this new function in the PowerPC MD code to ensure BSS-PLT modules using
PLT will be rejected during insertion, and to poison the runtime resolver to
ensure we get a clear panic reason if a call is made to the resolver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22608
off the stack, initialized to default values, and then filled in with
driver-specific values, all without having to worry about the numerous
other fields in the tag. The resulting template is then passed into
busdma and the normal opaque tag object created. See the man page for
details on how to initialize a template.
Templates do not support tag filters. Filters have been broken for many
years, and only existed for an ancient make/model of hardware that had a
quirky DMA engine. Instead of breaking the ABI/API and changing the
arugment signature of bus_dma_tag_create() to remove the filter arguments,
templates allow us to ignore them, and also significantly reduce the
complexity of creating and managing tags.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D22906
The SiFive FU540 Power Reset Clocking Interrupt block contains a PLL
that turns the input crystal (33.3MHz) into a 1-1.5GHz clock.
This clock in turn is divided by two to produce the tlclk, which is fed
into devices such as the SPI and I2C controllers.
Register a new clock device for the PRCI so that those devices can
read the correct clock through the clk framework.
Submitted by: kp
Sponsored by: Axiado
fix an assert violation introduced in r355784. Without this spinlock_exit()
may see owepreempt and switch before reducing the spinlock count. amd64
had been optimized to do a single critical enter/exit regardless of the
number of spinlocks which avoided the problem and this optimization had
not been applied elsewhere.
Reported by: emaste
Suggested by: rlibby
Discussed with: jhb, rlibby
Tested by: manu (arm64)
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
Reviewed by: alc, jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22650
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
- Use ustringp for the location of the argv and environment strings
and allow destp to travel further down the stack for the stackgap
and auxv regions.
- Update the Linux copyout_strings variants to move destp down the
stack as was done for the native ABIs in r263349.
- Stop allocating a space for a stack gap in the Linux ABIs. This
used to hold translated system call arguments, but hasn't been used
since r159992.
Reviewed by: kib
Tested on: md64 (amd64, i386, linux64), i386 (i386, linux)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22501
RISC-V inherited this code from arm64, so implement the fix from r354712.
See the revision for the full description.
Submitted by: kevans (arm64 version)
Change the FreeBSD ELF ABIs to use this new hook to copyout ELF auxv
instead of doing it in the sv_fixup hook. In particular, this new
hook allows the stack space to be allocated at the same time the auxv
values are copied out to userland. This allows us to avoid wasting
space for unused auxv entries as well as not having to recalculate
where the auxv vector is by walking back up over the argv and
environment vectors.
Reviewed by: brooks, emaste
Tested on: amd64 (amd64 and i386 binaries), i386, mips, mips64
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22355
SBI version 0.2 introduces functions for obtaining the details of the
SBI implementation, such as version and implemntation ID. Print this
info at startup when it is available.
Reviewed by: jhb, kp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22327
The Supervisor Binary Interface (SBI) specification v0.2 is a backwards
incompatible update to the SBI call interface for kernels running in
supervisor mode. The goal of this update was to make it easier for new
and optional functionality to be added to the SBI.
SBI functions are now called by passing an "extension ID" and a
"function ID" which are passed in a7 and a6 respectively. SBI calls
will also return an error and value in the following struct:
struct sbi_ret {
long error;
long value;
}
This version introduces several new functions under the "base"
extension. It is expected that all SBI implementations >= 0.2 will
support this base set of functions, as they implement some essential
services such as obtaining the SBI version, CPU implementation info, and
extension probing.
Existing SBI functions have been designated as "legacy". For the time
being they will remain implemented, but it is expected that in the
future their functionality will be duplicated or replaced by new SBI
extensions. Each legacy function has been assigned its own extension ID,
and for now we simply probe and assert for their existence.
Compatibility with legacy SBI implementations (such as BBL) is
maintained by checking the output of sbi_get_spec_version(). This
function is guaranteed to succeed by the new spec, but will return an
error in legacy implementations. We use this as an indicator of whether
or not we can rely on the new SBI base extensions.
For further info on the Supervisor Binary Interface, see:
https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
Reviewed by: kp, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22326
Allow for an additional argument to sbi_call which will be passed in a6.
This is required for SBI spec 0.2 support, as a6 will indicate the SBI
function ID.
While here, introduce some macros to clean up the calls.
Reviewed by: kp, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22325
Our PLIC implementation only enables interrupts on the boot cpu.
Implement plic_bind_intr() so that they can be redistributed near the
end of boot during intr_irq_shuffle().
This also slightly modifies how enable bits are handled in an attempt to
better fit the PIC interface. plic_enable_intr()/plic_disable_intr() are
converted to manage an interrupt source's threshold value, since this
value can be used as to globally enable/disable an irq. All handing of the
per-context enable bits is moved to the new methods plic_setup_intr()
and plic_bind_intr().
Reviewed by: br
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D21928
The RISC-V PLIC (platform level interrupt controller) registers are divided up
by "context", which is purposefully left ambiguous in the PLIC spec. Currently
we assume each CPU number corresponds 1-to-1 with a context number, but that is
not correct. Most existing PLIC implementations (such as SiFive's) have
multiple contexts per-cpu. For example, a single CPU might have a context for
machine mode interrupts and a context for supervisor mode interrupts. To
complicate things further, FreeBSD renumbers the CPUs during boot, but the PLIC
driver still assumes that CPU ID equals the RISC-V hart number, meaning
interrupt enables/claims might be performed for the wrong context registers.
To fix this, we must calculate each CPU's context number during
attachment. This is done by reading the interrupt properties from the
device tree, from which a mapping from context to RISC-V hart to CPU
number can be created.
Reviewed by: br
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D21927
This option is causing boot to fail for the Hifive Unleashed and older
versions of QEMU (3.1.1). Remove it from the GENERIC config for now.
Reported by: br
MFC after: 1 week
The fill_elf_hwcap() function expects to find only cpu nodes under the
/cpus entry of the device tree. Newer versions of QEMU insert a cpu-map
node which describes the CPU topology, breaking this function. To fix
this, simply skip any non-cpu entries.
Reviewed by: markj, kp, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22151
The lr.w instruction used to read the value from memory sign-extends
the value read from memory. GCC sign-extends the 32-bit comparison
value passed in whereas clang currently does not. As a result, if the
value being compared has the MSB set, the comparison fails for
matching 32-bit values when compiled with clang.
Use a cast to explicitly sign-extend the unsigned comparison value.
This works with both GCC and clang.
There is commentary in the RISC-V spec that suggests that GCC's
approach is more correct, but it is not clear if the commentary in the
RISC-V spec is binding.
Reviewed by: mhorne
Obtained from: Axiado
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22084
- td_kstack_pages was not being initialized.
- td_kstack is supposed to be the base address of the stack region,
not the top.
The arm ports seem to have similar problems and will be fixed next.
Reported by: Jenkins via lwhsu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
After r352110 the page lock no longer protects a page's identity, so
there is no purpose in locking the page in pmap_mincore(). Instead,
if vm.mincore_mapped is set to the non-default value of 0, re-lookup
the page after acquiring its object lock, which holds the page's
identity stable.
The change removes the last callers of vm_page_pa_tryrelock(), so
remove it.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21823
callers hold it.
This simplifies pmap code and removes a dependency on the object lock.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21596
busy acquires while held.
This allows code that would need to acquire and release a very large number
of page busy locks to use the old mechanism where busy is only checked and
not held. This comes at the cost of false positives but never false
negatives which the single consumer, vm_fault_soft_fast(), handles.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21592
be called on bootverbose. Do so on RISV-V too.
Submitted by: Nicholas O'Brien <nickisobrien_gmail.com>
Reviewed by: imp, kp
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D21998
the static device mappings.
While RISC-V support was added to subr_devmap.c in r298631, it was never
actually initialised in the machine dependent code.
Submitted by: Nicholas O'Brien <nickisobrien_gmail.com>
Reviewed by: br, kp
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D21975
During a CoW fault, we must check for both 4KB and 2MB mappings before
clearing PGA_WRITEABLE on the old mapping's page. Previously we were
only checking for 4KB mappings. This was missed in r344106.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
pmap_remove_l3() may remove the last mapping of a page, in which case
it must clear PGA_WRITEABLE.
Reported by: Jenkins, via lwhsu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
We must also check for large mappings. pmap_page_is_mapped() is
mostly used in assertions, so the problem was not very noticeable.
Reviewed by: alc
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21824
Centralize calculation of signal and ucode delivered on unhandled page
fault in new function vm_fault_trap(). MD trap_pfault() now almost
always uses the signal numbers and error codes calculated in
consistent MI way.
This introduces the protection fault compatibility sysctls to all
non-x86 architectures which did not have that bug, but apparently they
were already much more wrong in selecting delivered signals on
protection violations.
Change the delivered signal for accesses to mapped area after the
backing object was truncated. According to POSIX description for
mmap(2):
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified
portions of the last page of an object which are beyond its
end. References within the address range starting at pa and
continuing for len bytes to whole pages following the end of an
object shall result in delivery of a SIGBUS signal.
An implementation may generate SIGBUS signals when a reference
would cause an error in the mapped object, such as out-of-space
condition.
Adjust according to the description, keeping the existing
compatibility code for SIGSEGV/SIGBUS on protection failures.
For situations where kernel cannot handle page fault due to resource
limit enforcement, SIGBUS with a new error code BUS_OBJERR is
delivered. Also, provide a new error code SEGV_PKUERR for SIGSEGV on
amd64 due to protection key access violation.
vm_fault_hold() is renamed to vm_fault(). Fixed some nits in
trap_pfault()s like mis-interpreting Mach errors as errnos. Removed
unneeded truncations of the fault addresses reported by hardware.
PR: 211924
Reviewed by: alc
Discussed with: jilles, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21566
In a few cases, the symbol lookup is missing before attempting to
perform the relocation. While the relocation types affected are
currently unused, this results in an uninitialized variable warning,
that is escalated to an error when building with clang.
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21773
Fix some style(9) violations.
This also changes the name of the machine-dependent sysctl kern.debug_kld to
debug.kld_reloc, and changes its type from int to bool. This is acceptable
since we are not currently concerned with preserving the RISC-V ABI.
Reviewed by: markj, kp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21772
Convert all remaining references to that field to "ref_count" and update
comments accordingly. No functional change intended.
Reviewed by: alc, kib
Sponsored by: Intel, Netflix
Differential Revision: https://reviews.freebsd.org/D21768
The EARLY_AP_STARTUP option initializes non-boot processors
much sooner during startup. This adds support for this option
on RISC-V and enables it by default for GENERIC.
Reviewed by: jhb, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21661
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
This is re-appearance of the nop code removed from other arches in r287625.
Reviewed by: alc (as part of the larger patch), markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
DIfferential revision: https://reviews.freebsd.org/D21645
fdt_is_compatible_strict() inspects the first compatible property.
We need to inspect the following properties for 'riscv'.
ofw_bus_node_is_compatible() does a recursive search.
This patch fixes "Can't find CPU" error message when bootverbose = true.
Submitted by: Nicholas O'Brien (nickisobrien_gmail.com)
Reviewed by: philip, kp
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D21576
There are several mechanisms by which a vm_page reference is held,
preventing the page from being freed back to the page allocator. In
particular, holding the page's object lock is sufficient to prevent the
page from being freed; holding the busy lock or a wiring is sufficent as
well. These references are protected by the page lock, which must
therefore be acquired for many per-page operations. This results in
false sharing since the page locks are external to the vm_page
structures themselves and each lock protects multiple structures.
Transition to using an atomically updated per-page reference counter.
The object's reference is counted using a flag bit in the counter. A
second flag bit is used to atomically block new references via
pmap_extract_and_hold() while removing managed mappings of a page.
Thus, the reference count of a page is guaranteed not to increase if the
page is unbusied, unmapped, and the object's write lock is held. As
a consequence of this, the page lock no longer protects a page's
identity; operations which move pages between objects are now
synchronized solely by the objects' locks.
The vm_page_wire() and vm_page_unwire() KPIs are changed. The former
requires that either the object lock or the busy lock is held. The
latter no longer has a return value and may free the page if it releases
the last reference to that page. vm_page_unwire_noq() behaves the same
as before; the caller is responsible for checking its return value and
freeing or enqueuing the page as appropriate. vm_page_wire_mapped() is
introduced for use in pmap_extract_and_hold(). It fails if the page is
concurrently being unmapped, typically triggering a fallback to the
fault handler. vm_page_wire() no longer requires the page lock and
vm_page_unwire() now internally acquires the page lock when releasing
the last wiring of a page (since the page lock still protects a page's
queue state). In particular, synchronization details are no longer
leaked into the caller.
The change excises the page lock from several frequently executed code
paths. In particular, vm_object_terminate() no longer bounces between
page locks as it releases an object's pages, and direct I/O and
sendfile(SF_NOCACHE) completions no longer require the page lock. In
these latter cases we now get linear scalability in the common scenario
where different threads are operating on different files.
__FreeBSD_version is bumped. The DRM ports have been updated to
accomodate the KPI changes.
Reviewed by: jeff (earlier version)
Tested by: gallatin (earlier version), pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20486
The branch from _start to mpentry has to cross a large section of data;
an offset larger than can be specified with a 12-bit branch immediate.
Fix this by converting the branch to an unconditional jump. The gcc
assembler does this conversion silently but it is not done automatically
by clang.
Reported by: Jeremy Bennett <jeremy.bennett@embecosm.com>
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21437
Many extern struct pcpu <something>__pcpu declarations were
copied/pasted in sources. The issue is that the definition is MD, but
it cannot be provided by machine/pcpu.h due to actual struct pcpu
defined in sys/pcpu.h later than the inclusion of machine/pcpu.h.
This forced the copying when other code needed direct access to
__pcpu. There is no way around it, due to machine/pcpu.h supplying
part of struct pcpu fields.
To work around the problem, add a new machine/pcpu_aux.h header, which
should fill any needed MD definitions after struct pcpu definition is
completed. This allows to remove copies of __pcpu spread around the
source. Also on x86 it makes it possible to remove work arounds like
OFFSETOF_CURTHREAD or clang specific warnings supressions.
Reported and tested by: lwhsu, bcran
Reviewed by: imp, markj (previous version)
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21418
doing so adds more flexibility with less redundant code.
Reviewed by: jhb, markj, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21250
r343275 introduced a performance optimisation to the copyin/copyout
routines by attempting to copy word-per-word rather than byte-per-byte
where possible.
This optimisation failed to account for cases where the buffer is longer
than XLEN_BYTES, but due to misalignment does not not allow for any
word-sized copies. E.g. a 9 byte buffer (with XLEN_BYTES == 8) which is
misaligned by 2 bytes. The code nevertheless did a single full-word
copy, which meant we copied too much data. This potentially clobbered
other data.
This is most easily demonstrated by a simple `sysctl -a`.
Fix it by not assuming that we'll always have at least one full-word
copy to do, but instead checking the remaining length first.
Reviewed by: markj@, mhorne@, br@ (previous version)
MFC after: 1 week
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D21100
if a demotion succeeds, then all of the 4KB page mappings within the
superpage-sized region must be valid, so there is no point in testing the
validity of the 4KB page mapping that is going to be write protected.
Deindent the nearby code.
Reviewed by: kib, markj
Tested by: pho (amd64, i386)
X-MFC after: r350004 (this change depends on arm64 dirty bit emulation)
Differential Revision: https://reviews.freebsd.org/D21027
We can't use a u_int to compute the physical address in
pmap_early_vtophys(). Our int is 32-bit, but the physical address is
64-bit. This works fine if everything lives in below 0x100000000, but as
soon as it doesn't this breaks.
MFC after: 1 week
Sponsored by: Axiado
syscallret() doesn't use error anymore. Fix a few other places to permit
removing the return value from syscallenter() entirely.
- Remove a duplicated assertion from arm's syscall().
- Use td_errno for amd64_syscall_ret_flush_l1d.
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D2090
pmap_ts_referenced() does not necessarily clear the access bit from
all accessed mappings of a given page. Thus, if a scan of the mappings
needs to be restarted, we should be careful to avoid double-counting
accessed mappings whose access bits were not cleared in a previous
attempt.
Reported by: alc
Reviewed by: alc
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20926
Casueword(9) on ll/sc architectures must be prepared for userspace
constantly modifying the same cache line as containing the CAS word,
and not loop infinitely. Otherwise, rogue userspace livelocks the
kernel.
To fix the issue, change casueword(9) interface to return new value 1
indicating that either comparision or store failed, instead of relying
on the oldval == *oldvalp comparison. The primitive no longer retries
the operation if it failed spuriously. Modify callers of
casueword(9), all in kern_umtx.c, to handle retries, and react to
stops and requests to terminate between retries.
On x86, despite cmpxchg should not return spurious failures, we can
take advantage of the new interface and just return PSL.ZF.
Reviewed by: andrew (arm64, previous version), markj
Tested by: pho
Reported by: https://xenbits.xen.org/xsa/advisory-295.txt
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D20772
The hold_count and wire_count fields of struct vm_page are separate
reference counters with similar semantics. The remaining essential
differences are that holds are not counted as a reference with respect
to LRU, and holds have an implicit free-on-last unhold semantic whereas
vm_page_unwire() callers must explicitly determine whether to free the
page once the last reference to the page is released.
This change removes the KPIs which directly manipulate hold_count.
Functions such as vm_fault_quick_hold_pages() now return wired pages
instead. Since r328977 the overhead of maintaining LRU for wired pages
is lower, and in many cases vm_fault_quick_hold_pages() callers would
swap holds for wirings on the returned pages anyway, so with this change
we remove a number of page lock acquisitions.
No functional change is intended. __FreeBSD_version is bumped.
Reviewed by: alc, kib
Discussed with: jeff
Discussed with: jhb, np (cxgbe)
Tested by: pho (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19247
vm_page_dirty() when, in fact, we are write protecting the page and the L3
entry has PTE_D set. However, pmap_protect() was always calling
vm_page_dirty() when an L2 entry has PTE_D set. Handle L2 entries the
same as L3 entries so that we won't perform unnecessary calls to
vm_page_dirty().
Simplify the loop calling vm_page_dirty() on L2 entries.
AT_HWCAP is a field in the elf auxiliary vector meant to describe
cpu-specific hardware features. For RISC-V we want to use this to
indicate the presence of any standard extensions supported by the CPU.
This allows userland applications to query the system for supported
extensions using elf_aux_info(3).
Support for an extension is indicated by the presence of its
corresponding bit in AT_HWCAP -- e.g. systems supporting the 'c'
extension (compressed instructions) will have the second bit set.
Extensions advertised through AT_HWCAP are only those that are supported
by all harts in the system.
Reviewed by: jhb, markj
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20493
The mcall_trap() dummy function is unused, and should be removed as we
are unlikely to support M-mode traps any time soon.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20494
Some of the config options that are disabled by default seem to be only
for historical reasons. Enable those that appear to no longer be
problematic. This includes WITH_CTF, STACK, GEOM_RAID, and re-enabling
blacklisted kernel modules.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20495
Most architectures print their total (real) and available memory during
boot. Properly initialize the realmem global and print these messages.
Also print the physical memory chunks (behind a bootverbose flag).
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20496
Add the enter and exit events, similar to what's found in
hammer_time() on amd64. We must use TSRAW as the pcpu isn't yet
initialized.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20497
The gp register is intended to used by the linker as another means of
performing relaxations, and should point to the small data section (.sdata).
Currently gp is being used as the pcpu pointer within the kernel, but the more
appropriate choice for this is the tp register, which is unused.
Swap existing usage of gp with tp within the kernel, and set up gp properly
at boot with the value of __global_pointer$ for all harts.
Additionally, remove some cases of accessing tp from the PCB, as it is not
part of the per-thread state. The user's tp and gp should be tracked only
through the trapframe.
Reviewed by: markj, jhb
Approved by: markj (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19893
previously addressed in r348246.
This pmap problem also exists on arm64 and riscv. However, the original
solution developed for amd64 and i386 cannot be used on arm64 and riscv. In
particular, arm64 and riscv do not define a PG_PROMOTED flag in their level
2 PTEs. (A PG_PROMOTED flag makes no sense on arm64, where unlike x86 or
riscv we are required to break the old 4KB mappings before making the 2MB
mapping; and on riscv there are no unused bits in the PTE to define a
PG_PROMOTED flag.)
This commit implements an alternative solution that can be used on all four
architectures. Moreover, this solution has two other advantages. First, on
older AMD processors that required the Erratum 383 workaround, it is less
costly. Specifically, it avoids unnecessary calls to pmap_fill_ptp() on a
superpage demotion. Second, it enables the elimination of some calls to
pagezero() in pmap_kernel_remove_{l2,pde}().
In addition, remove a related stale comment from pmap_enter_{l2,pde}().
Reviewed by: kib, markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20538
These calls are not the same in general: the former will dequeue the
page if it is enqueued, while the latter will just leave it alone. But,
all existing uses of the former apply to unmanaged pages, which are
never enqueued in the first place. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20470
Similar to r348026, exhaustive search for uses of CTRn() and cross reference
ktr.h includes. Where it was obvious that an OS compat header of some kind
included ktr.h indirectly, .c files were left alone. Some of these files
clearly got ktr.h via header pollution in some scenarios, or tinderbox would
not be passing prior to this revision, but go ahead and explicitly include it
in files using it anyway.
Like r348026, these CUs did not show up in tinderbox as missing the include.
Reported by: peterj (arm64/mp_machdep.c)
X-MFC-With: r347984
Sponsored by: Dell EMC Isilon
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
from SiFive, Inc.
The first core on this SoC (hart 0) is a 64-bit microcontroller.
o Pick a hart to run boot process using hart lottery.
This allows to exclude hart 0 from running the boot process.
(BBL releases hart 0 after the main harts, so it never wins the lottery).
o Renumber CPUs early on boot.
Exclude non-MMU cores. Store the original hart ID in struct pcpu. This
allows to find out the correct destination for IPIs and remote sfence
calls.
Thanks to SiFive, Inc for the board provided.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20225
So do nothing in pmap_page_set_memattr() and don't panic.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20209
Having IPSEC compiled into the kernel imposes a non-trivial
performance penalty on multi-threaded workloads due to IPSEC
refcounting. In my benchmarks of multi-threaded UDP
transmit (connected sockets), I've seen a roughly 20% performance
penalty when the IPSEC option is included in the kernel (16.8Mpps
vs 13.8Mpps with 32 senders on a 14 core / 28 HTT Xeon
2697v3)). This is largely due to key_addref() incrementing and
decrementing an atomic reference count on the default
policy. This cause all CPUs to stall on the same cacheline, as it
bounces between different CPUs.
Given that relatively few users use ipsec, and that it can be
loaded as a module, it seems reasonable to ask those users to
load the ipsec module so as to avoid imposing this penalty on the
GENERIC kernel. Its my hope that this will make FreeBSD look
better in "out of the box" benchmark comparisons with other
operating systems.
Many thanks to ae for fixing auto-loading of ipsec.ko when
ifconfig tries to configure ipsec, and to cy for volunteering
to ensure the the racoon ports will load the ipsec.ko module
Reviewed by: cem, cy, delphij, gnn, jhb, jpaetzel
Differential Revision: https://reviews.freebsd.org/D20163
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
RISC-V ISA specifies no cache management instructions so leave cache
operations in cpufunc.h as no-op for now.
Note some new hardware comes with their own memory-mapped cache
management controller.
Tested on HiFive Unleashed board with cgem(4).
Reviewed by: markj
Obtained from: arm64
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D20126
In certain scenarios, it is possible for PCPU data to be
accessed before it has been initialized (e.g. during printf
if the kernel was built with the TSLOG option).
Initialize the PCPU pointer for hart 0 at the beginning of
initriscv() rather than near the end.
Reviewed by: markj
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D19726
o Fix bug in PLIC_ENABLE macro when irq >= 32.
Tested on the real hardware, which is HiFive Unleashed board.
Thanks to SiFive, Inc. for the board provided.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19775
RISC-V timer has no dedicated DTS node and we have to get timer
frequency from cpus node.
Tested on Government Furnished Equipment (GFE) cores synthesized
on Xilinx VCU118.
Reviewed by: markj
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19727
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
PTI mode for the process pmap on exec is activated iff P_MD_PTI is set.
On exec, the existing vmspace can be reused only if pti mode of the
pmap matches the P_MD_PTI flag of the process. Add MD
cpu_exec_vmspace_reuse() callback for exec_new_vmspace() which can
vetoed reuse of the existing vmspace.
MFC note: md_flags change struct proc KBI.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
