Commit Graph

24703 Commits

Author SHA1 Message Date
markm
ebebdc212c Changes for the new KTH KerberosIV. 1997-09-28 08:42:27 +00:00
markm
a04d487285 There is a clear separation of the crypto telnet and the non-crypto telnet.
As this is the non-crypto version, remove the useless (commented out)
directives and macros.
1997-09-28 08:40:54 +00:00
markm
6122273f59 Changes for the new KTH Kerberos4.
Also make -Wall a bit quieter
1997-09-28 08:38:04 +00:00
markm
55c21e7263 Changes for the new KTH Kerberos.
Also make -Wall a bit quieter.
1997-09-28 08:36:04 +00:00
phk
159b51570f Print the filename, not the directory we compiled in. 1997-09-28 08:34:46 +00:00
markm
6bef2b9623 Change to use the new KTH Kerberos.
Also make -Wall a bit quieter.
1997-09-28 08:32:59 +00:00
phk
93c5769c6c Fix handling of nested mountpoints in __getcwd()
Detected by:	Simon Shapiro <Shimon@i-Connect.Net>
1997-09-28 06:37:02 +00:00
kato
7890a25c74 Synchronize with sys/i386/isa/diskslice_machdep.c revision 1.26. 1997-09-28 05:52:51 +00:00
kato
f052508469 Fixed duplicate case introduced by previous commit. 1997-09-28 05:51:49 +00:00
msmith
9bdcf66040 Typo fix 1997-09-28 03:28:34 +00:00
msmith
4606b60a1f Fix typo in signal() prototype 1997-09-28 03:28:09 +00:00
kato
70a6b57455 Oops, include <sys/conf.h>.
Reminded-by:	Simon Shapiro <Shimon@i-Connect.Net>
1997-09-28 02:23:10 +00:00
peter
66e710212a YAMF22: (rev 1.3.2.2) Display realtime and idle priorities appropriately. 1997-09-28 00:59:04 +00:00
fsmp
bc20671bb8 Added a missing comma for the INTR_SPL case. 1997-09-27 20:07:58 +00:00
brian
889a2eb5e6 Don't depend on time.h including sys/types.h 1997-09-27 19:41:40 +00:00
gibbs
35d713757e Add support to the host driver for "downloaded constants". These are immediate
operands that are set during seqeuncer program download instead of at
assembly time.

Remove the REJBYTE sram variable.  The host driver can just as easly
read the accumulator to get this value.

This should fix the reported problems with cards that don't have devices
attached to them failing with a stream of "Somone reset bus X" messages.

Doug Ledford determined the cause of the problem, fixes by me.
1997-09-27 19:38:27 +00:00
gibbs
b9404180a2 Add support to aicasm for "downloaded constants". These are immediate
operands that are set during seqeuncer program download instead of at
assembly time.

Convert the sequencer code to use" downloaded constants" for four run time
constants that vary depending on the board type.  This frees up 4 bytes
of sequencer scratch ram space where these constants used to be stored and
also removes the additional instructions required to load their values
into the accumulator prior to using them.

Remove the REJBYTE sram variable.  The host driver can just as easly
read the accumulator to get this value.

The scratch ram savings is important as the old code used to clober the
SCSICONF register on 274X cards which sits near the top of scratch ram
space.  The SCSICONF register controls bus termination, and clobbering
it is not a good thing.  Now we have 4 bytes to spare.

This should fix the reported problems with cards that don't have devices
attached to them failing with a stream of "Somone reset bus X" messages.

Doug Ledford determined the cause of the problem, fixes by me.
1997-09-27 19:37:31 +00:00
brian
eba31c6066 Don't login twice when using passwdauth
Suggested by:	Peter Childs <pjchilds@imforei.apana.org.au>
Merge the whole module into a few lines in pap.c
1997-09-27 19:11:43 +00:00
joerg
0966285152 Hide the `no magic' babble behind bootverbose, since it has proven to
be too much magic for 99.9 % of the users.
1997-09-27 15:34:34 +00:00
kato
54f0e5ef9d Add noclusterr and noclusterw options. The noclusterr and noclusterw
disable clustered read and write, respectively.

Reviewed by:	bde
1997-09-27 13:44:17 +00:00
hoek
0ec680f86f Document pkg_add's dependency auto-install. While I'm here, fix
a couple typos, and consistent double-spacing after sentences.

This is actually a spinoff from the "ports-current discontinued"
blow-up some time ago.

Ack'd by: jkh
1997-09-27 13:41:35 +00:00
kato
fe9b86cf0b Clustered read and write are switched at mount-option level.
1. Clustered I/O is switched by the MNT_NOCLUSTERR and MNT_NOCLUSTERW
   bits of the mnt_flag.  The sysctl variables, vfs.foo.doclusterread
   and vfs.foo.doclusterwrite are deleted.  Only mount option can
   control clustered I/O from userland.
2. When foofs_mount mounts block device, foofs_mount checks D_CLUSTERR
   and D_CLUSTERW bits of the d_flags member in the block device switch
   table.  If D_NOCLUSTERR / D_NOCLUSTERW are set, MNT_NOCLUSTERR /
   MNT_NOCLUSTERW bits will be set.  In this case, MNT_NOCLUSTERR and
   MNT_NOCLUSTERW cannot be cleared from userland.
3. Vnode driver disables both clustered read and write.
4. Union filesystem disables clutered write.

Reviewed by:	bde
1997-09-27 13:40:20 +00:00
kato
31e1d6ad00 Synchronize with sys/i386/isa/syscons.c revision 1.233. 1997-09-27 12:55:57 +00:00
wosch
124b848338 Translated too much of it.
Submitted by: Andrzej Bialecki <abial@korin.warman.org.pl>
1997-09-27 10:31:27 +00:00
ache
b8375a6112 Use revived __maskrune for digittoint
Minor formatting
1997-09-27 04:34:35 +00:00
ache
7ff3236447 Oops, fix typo in istype definition 1997-09-27 04:30:50 +00:00
ache
a4d6990ae6 1) Bring '!!' back since we wan't overflow even a char
2) Revive __maskrune, just return mask now
3) Express __istype via !!__maskrune
4) Use __maskrune in digittoint
1997-09-27 04:22:47 +00:00
peter
8161901df7 Spell out a few things for the media options. 1997-09-27 02:55:39 +00:00
wollman
b26754caaa Having done ICMP, UDP, and IP, could a TCP display be far behind? 1997-09-27 00:44:55 +00:00
jkh
8a0c7c5ebe Add (ick) -ldes to the boot floppy so that ppp can link again.
Not sure what this does to exportability but it's probably not
good.
1997-09-27 00:33:48 +00:00
msmith
1b05a4262f The previous commit broke support for the Pro/10; detect which sort of
card we are using and calculate the IRQ accordingly.
1997-09-26 17:17:43 +00:00
msmith
fb193b1b60 Update documentation for the 'ex' driver to indicate that it supports
the Pro/10+ cards as well.
1997-09-26 17:16:52 +00:00
itojun
95dce19a99 tiny update of ESC sequence parser.
- some addition of comments (for readability)
- iso-2022 G0 designation support.  This does almost nothing.  Just for
  avoiding garbled screen when got "ESC ( B".
  (how about G1/2/3 designation? I'm not sure)
1997-09-26 15:27:55 +00:00
kato
2a21c9d118 Synchronize with sys/i386/i386/machdep.c revision 1.266. 1997-09-26 09:47:04 +00:00
jkh
93cb3f3468 When making make, do cleandir *before* objdir or we'll end
up with a blown objdir for the depend stage, leaving the
.depend file in ${SRCDIR} instead.
1997-09-26 09:31:41 +00:00
joerg
2c55c29ae9 Set `crt' by default to make mail(1) happy. 1997-09-26 08:28:31 +00:00
joerg
22cd9dbc5d Set `crt' by default to make mail(1) happy.
Also, comment out the not so very commonly used interviews settings.
1997-09-26 08:28:19 +00:00
phk
3783a8767e I lost a bit of my change in the last commit, this is more like it.
Noticed by:	bde
1997-09-26 08:08:58 +00:00
phk
f5b2fcb0c6 Add canonical 32bit crc as alorithm 3.
PR:		4615
Reviewed by:	phk
Submitted by:	Mike Meyer <mwm@shiva.the-park.com>
1997-09-26 08:02:18 +00:00
jkh
fac1bc9849 Remove bogus declaration of calloc() that broke the build. Test, folks,
test!
1997-09-26 06:25:42 +00:00
alex
c6ca8e3387 Changed ipfw grep string: reject rules are now listed as deny, reset,
or unreach.
1997-09-26 01:38:30 +00:00
brian
72603302dc #define RECON_ENVOKED as 4 (not 3, like RECON_UNKNOWN)
Pointed out by:	tom@tomqnx.com (Tom Torrance at home)
1997-09-26 00:23:36 +00:00
ache
6566cdfa69 daemon: bump maxproc from 256 to 512
256 means f.e. that only 256 users at once can be served by your HTTPD
1997-09-26 00:19:53 +00:00
ache
eeedaac4ba Add missing SJIS and pl_PL entries 1997-09-25 23:57:53 +00:00
ache
0464de3a53 Add mskanji.c 1997-09-25 23:24:35 +00:00
ache
d2f27c061b Move it under XPG4 define 1997-09-25 23:20:26 +00:00
ache
5405cc0bba Move MSKanji under XPG4 define 1997-09-25 23:18:10 +00:00
ache
9021e21701 __maskrune --> __istype 1997-09-25 23:10:38 +00:00
ache
a411894a17 Oops, wrong version of digittoint fix was commited, step back to v1.8
instead just remove '!!' to make digittoint() work and re-arrange
things a little
1997-09-25 22:44:21 +00:00
ache
253e0dc600 Fix digittoint broken long ago
Redesign to allow digittoint work for runes too
__maskrune removed, __istype become a macro, __runeflags added
1997-09-25 22:27:45 +00:00