Reduce the size of the EFI_STAGING area we allocate on arm to 32. On arm SBC
such as the NanoPi-NEOLTS the staging area allocation will fail on the 256MB
model with a staging size of 64.
Reviewed by: bcran, manu
Approved by: bz (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21016
This allows use of the shared _net_inet_sdp in more than one compilation
unit. (Nothing in-tree uses this today, but some of Isilon's out-of-tree
SDP enhancements add sysctls below the node.)
Sponsored by: Dell EMC Isilon
When local support was fixed, it introduced a minor bug in formatting. We don't
increment the lpos by enouogh, so lines are a little too long. Adjust to be
correct now with variable length srcprefix.
Inizialize global variables earlier in the process. It doesn't matter today, but
may in the future if we want to access these lists earlier in config's run.
Commit message by Jake:
The iflib_register function exists to allocate and setup some common
structures used by both iflib_device_register and iflib_pseudo_register.
There is no associated cleanup function used to undo the steps taken in
this function.
Both iflib_device_deregister and iflib_pseudo_deregister have some of
the necessary steps scattered in their flow. However, most of the
necessary cleanup is not done during the error path of
iflib_device_register and iflib_pseudo_register.
Some examples of missed cleanup include:
the ifp pointer is not free'd during error cleanup
the STATE and CTX locks are not destroyed during error cleanup
the vlan event handlers are not removed during error cleanup
media added to the ifmedia structure is not removed
the kobject reference is never deleted
Additionally, when initializing the kobject class reference counter is
increased even though kobj_init already increases it. This results in
the class never being free'd again because the reference count would
never hit zero even after all driver instances are unloaded.
To aid in proper cleanup, implement an iflib_deregister function that
goes through the reverse steps taken by iflib_register.
Call this function during the error cleanup for iflib_device_register
and iflib_pseudo_register. Additionally call the function in the
iflib_device_deregister and iflib_pseudo_deregister functions near the
end of their flow. This helps reduce code duplication and ensures that
proper steps are taken to cleanup allocations and references in both the
regular and error cleanup flows.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21005
NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
ufsread.c grows a dependency on __ashldi3 with llvm90. For gptboot, just
start pulling in ashldi3.c ashrdi3.c lshrdi3.c into libsa for all archs as
the number of archs requiring one or more of them keeps growing. qdivrem.c
and quad.h can be trivially kicked out of libsa if we start pulling these
from compiler-rt as qdivrem was only used to implement umoddi3, divdi3,
moddi3 (also in qdivrem.c).
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21291
ufsread.c grows a dependency on __ashldi3 with llvm90. Grab ashldi3.c out of
compiler-rt rather than trying to link against libsa (for now).
-Wno-missing-prototypes is necessary to compile ashldi3.c standalone.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21291
It is unused, the ABI was broken in r322969, and it is broken by design
(more than MDNPAD md devices can exist and there is no way to retreive
them with this interface).
mdconfig(8) was converted to use libgeom to obtain this information
in r157160 and any other consumers of MDIOCLIST should likewise be
converted.
Reviewed by: emaste
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18936
Since r349596 the syscon driver will map the memory. Since the gpio/pinctrl
controller wants it too set it to SHAREABLE.
This fix the gpio controller for attaching and so consumer can use it.
Now the sdhci_xenon driver can detect presence of an sdcard and attach
the mmc driver.
MFC after: 1 week
Although libc syscall wrappers do not get checked in this can aid in
finding the source of generated files when spelunking in the objdir.
Multiple tools use @generated to identify generated files (for example,
in a review Phabricator will by default hide diffs in generated files).
For consistency use the @generated tag in makesyscalls.sh as we've done
for other generated files, even though these wrappers aren't checked in
to the tree.
Other parts of stand/ that don't use libsa will need to grab bits from libc
shortly. Push LIBC_SRC up to defs.mk in advance of this so that they can use
it, and rename it to LIBCSRC to match the convention of the rest of the *SRC
variables in this file.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21282
In addition to pagedaemon initiating OOM, also do it from the
vm_fault() internals. Namely, if the thread waits for a free page to
satisfy page fault some preconfigured amount of time, trigger OOM.
These triggers are rate-limited, due to a usual case of several
threads of the same multi-threaded process to enter fault handler
simultaneously. The faults from pagedaemon threads participate in the
calculation of OOM rate, but are not under the limit.
Reviewed by: markj (previous version)
Tested by: pho
Discussed with: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13671
The FUSE_LISTXATTR operation always returns the full list of a file's
extended attributes, in all namespaces. There's no way to filter the list
server-side. However, currently FreeBSD's fusefs driver sends a namespace
string with the FUSE_LISTXATTR request. That behavior was probably copied
from fuse_vnop_getextattr, which has an attribute name argument. It's
been there ever since extended attribute support was added in r324620. This
commit removes it.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21280
doing so adds more flexibility with less redundant code.
Reviewed by: jhb, markj, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21250
When the byte range for copy_file_range(2) doesn't go to EOF on the
output file and there is a hole in the input file, a hole must be
"punched" in the output file. This is done by writing a block of bytes
all set to 0.
Without this patch, the write is done unconditionally which means that,
if the output file already has a hole in that byte range, a unneeded data block
of all 0 bytes would be allocated.
This patch adds code to check for a hole in the output file, so that it can
skip doing the write if there is already a hole in that byte range of
the output file. This avoids unnecessary allocation of blocks to the
output file.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D21155
This adds safety net for the case of misconfigured NTB with too big
memory window, for which we may be unable to allocate a memory buffer,
which does not make much sense for the network interface. While there,
fix the code to really work with asymmetric window sizes setup.
This makes driver just print warning message on boot instead of hanging
if too large memory window is configured.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This fixes -Wcast-align errors when compiled with WARNS=6.
Submitted by: Ján Sučan <sucanjan@gmail.com>
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21217
In r350842 I've switched the bus pass to resource so it matches the other
clock drivers but this cannot work as this drivers is meant to match
the dts node '/clocks' and if we don't do it at this pass simplebus is
catching this node and we cannot attach.
This solve booting on Allwinner boards that are still using /clocks (A20 SoC)
MFC after: 3 days
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler did not handle .codeNN directives. Clang gained
support quite some time ago, so we can build stand/ with IAS.
In some cases there were small differences in generated object output.
In the case of gptzfsboot however using GNU as or Clang IAS to assemble
gptldr.S resulted in identical final gptzfsboot binary output.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11115
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
pxeldr, so CLANG_NO_IAS was not previously removed for those.
In the case of pxeldr the difference is that IAS adds a size override
prefix (67h) to three instructions to specify a 32-bit address, even
though the two high bytes are zero and the address fits in 16 bits.
this wastes three bytes per instruction and causes some additional nop
npadding to be required elsewhere in the object, but pxeboot is not
size-constrained so it doesn't matter.
Sponsored by: The FreeBSD Foundation
Fix the reported boot failures and revert r350510.
Note this commit is effectively merging ACPICA 20190703 again and applying
an upstream patch.
https://github.com/acpica/acpica/commit/73f6372
Tested by: scottl
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS. In most cases IAS- and GNU as-assembled boot components were
identical, and CLANG_NO_IAS was already removed from other components.
Clang IAS produces different output for some components, including
cdboot, so CLANG_NO_IAS was not previously removed for those.
In the case of cdboot the difference is that IAS adds a size override
prefix (67h) to many instructions to specify a 32-bit address, even
though the two high bytes are zero. This wastes three bytes per
instance, but as cdboot is not size-constrained it doesn't matter.
Padding is also different in one case; Clang used two one-byte nops
while GNU as used a single two-byte xchg %eax, %eax. In any case, there
is no functional change.
Sponsored by: The FreeBSD Foundation
