cross into regions which are within MSS bytes of a 4GB boundary.
If we encounter the condition, drop the packet.
Reviewed by: Geans Pin geanspin@Broacom
The Block Event Interrupts, BEI, feature does not
work like expected with the Renesas XHCI chipsets.
Revert feature.
While at it correct the TD SIZE computation in
case of Zero Length Packet, ZLP, in the end of a
multi frame USB transfer.
MFC after: 1 week
PR: usb/180726
for consumption outside the vfs_aio.c.
For SIGEV_THREAD_ID and SIGEV_SIGNAL notification delivery methods,
also copy in the sigev_value, since librt event pumping loop compares
note generation number with the value passed through sigev_value.
Tested by: Petr Salinger <Petr.Salinger@seznam.cz>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Display a AF_LINK address in #linkN when sdl_{nlen,alen,slen) == 0 and
sdl_index != 0.
- Reduce unnecessary loop in pmsg_addrs().
- Remove iso_ntoa(). This is not used.
DB120 development board.
The AR934x SoCs are a MIPS74k based system with increased RAM addressing
space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3
on-board dual-band wifi.
This support isn't complete by any stretch; it's just enough to bring
the board up for others to tinker with. Notably, the MIPS74k support
is broken. However it boots enough to echo some basic probe/attach
messages, before dying somewhere in the TLB code.
Thankyou to Qualcomm Atheros for their continued support of me doing
open source work with their hardware.
Tested:
* AR9344, mips74k
This code reads the PLL configuration registers and correctly programs
things so the UART and such can come up.
There's MIPS74k platform issues that need fixing; but this at least brings
things up enough to echo stuff out the serial port and allow for interactive
debugging with ddb.
Tested:
* AR71xx SoCs
* AR933x SoC
* AR9344 board (DB120)
Obtained from: Qualcomm Atheros; Linux/OpenWRT
For all pre-AR933x chips, the frequency is just the APB frequency.
For the AR933x, the UART frequency is different but we just hacked around
it.
For the AR934x, there's a different PLL setting for these, so they have
to be broken out.
the attribute bitmap argument would be non-zero. This caused an
interoperability problem for a recent patch to the Linux NFSv4 client.
The Linux folks have changed their patch to avoid this, but this
patch fixes the problem on the server.
Reported and tested by: Andre Heider (a.heider@gmail.com)
MFC after: 3 days
- inet 192.0.2.1-10 netmask 255.255.255.0 (inet range spec + ifconfig options)
- inet6 2001:db8:1::1-f prefixlen 60 (inet6 range spec + ifconfig options)
If prefixlen or netmask option is specified with CIDR notation at
the same time, the option is used.
Tested by: Michael Grimm
MFC after: 3 days
The creation time support breaks the data structures used in linux
fuse. libfuse carries it's own header.
Revert the changes for now. We will try to get an agreement with the
fuse upstream maintainers to avoid having to patch the library
headers all the time.
instruction set. Thumb-2 requires an if-then instruction to implement
conditional codes.
When building for ARM mode the it-then instructions do not generate any
assembled instruction as per the ARMv7-A Architecture Reference Manual, and
are safe to use.
While this allows the atomic instructions to be built, it doesn't mean we
fully support Thumb code. It works in small tests, but is still known to
fail in a large number of places.
While here add a check for the armv6t2 architecture.
new 1Gb server controller chip that will be going into production
soon.
BCM5725 combines MAC with triple-speed PHY, a Network Controller
Sideband Interface (NC-SI) and on-chip memory buffer in a single
device. BCM5725 has an Application Processing Engine (APE) that is
capable of on-chip management and offloading features. BCM5725
supports high-precision clock, time stamp registers for
receive/transmit packets and programmable trigger inputs and
watchdog timeouts. These new features are not yet supported by
bge(4).
Many thanks to Broadcom for continuing to support FreeBSD!
Submitted by: Geans Pin geanspin@Broacom (initial version)
Reviewed by: Geans Pin geanspin@Broacom
H/W donated by: Broadcom
Recalculate FUSE_COMPAT_ENTRY_OUT_SIZE and COMPAT_ATTR_OUT_SIZE.
These were wrong in the previous commit. They are actually unused
in FreeBSD though.
Pointed out by: Jan Beich
When birthtime was added (r253331) we missed adding the weight
of the new fields in FUSE_COMPAT_ENTRY_OUT_SIZE and
COMPAT_ATTR_OUT_SIZE. Adjust them accordingly.
Pointed out by: Jan Beich
As part of this commit, add an nvme_strvis() function which borrows
heavily from cam_strvis(). This will allow stripping of
leading/trailing whitespace and also handle unprintable characters
in model/serial numbers. This function goes into a new nvme_util.c
file which is used by both the driver and nvmecontrol.
Sponsored by: Intel
Reviewed by: carl
MFC after: 3 days
Recent testing with QEMU that has variable sector size support for
NVMe uncovered some of these issues. Chatham prototype boards supported
only 512 byte sectors.
Sponsored by: Intel
Reviewed by: carl
MFC after: 3 days
- Add a new address space allocation method (VMFS_OPTIMAL_SPACE) for
vm_map_find() that will try to alter the alignment of a mapping to match
any existing superpage mappings of the object being mapped. If no
suitable address range is found with the necessary alignment,
vm_map_find() will fall back to using the simple first-fit strategy
(VMFS_ANY_SPACE).
- Change mmap() without MAP_FIXED, shmat(), and the GEM mapping ioctl to
use VMFS_OPTIMAL_SPACE instead of VMFS_ANY_SPACE.
Reviewed by: alc (earlier version)
MFC after: 2 weeks
kern.geom.confxml sysctl, it's silly to warn about tags in libgeom,
especially since libgeom exists simply to build a tree out of the conf
information.
Obtained from: Netflix
MFC after: 3 days
