The mbtoc(3) and wctomb(3) functions use internal state which may be
tainted before the call to strvis(3). In this context we can just use
the thread-safe versions mbrtoc(3) and wcrtomb(3) which allow passing
our own state from our stack.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This is imported from NetBSD. The author--Joerg Sonnenberger--agreed
to apply a two-clause BSD license, just so the license was clear.
This source tree location matches NetBSD, and is the first place someone
might look for such a tool.
Obtained from: Joerg Sonnenberger via NetBSD
MFC after: 3 days
Sponsored by: Dell EMC
will be used by the gicv2m and ITS ACPI drivers to only attach to the
correct parent.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
The tools using to generate the sources has been updated and produces
different whitespaces. Commit this seperately to avoid intermixing
these with real code changes.
MFC after: 3 days
Enumeration of return probes involves disassembling subroutines in the
target process, and ptrace(2) is currently used to read from the target
process. libproc could read from the backing file instead to avoid this
problem, but in the common case libdtrace will have a writeable handle
on the process anyway. In particular, a writeable handle is needed to list
USDT probes, and libdtrace will cache such a handle for processes that it
controls via dtrace -c and -p.
This change adds some handling for the equivalent of Solaris' PGRAB_*
flags. In particular, support for PGRAB_RDONLY is needed to avoid a
nasty deadlock: dtrace(1) may otherwise stop the master process for its
pseudo-terminal and end up blocking while writing to standard output.
Extend the file handle cache entries to include symbol tables as well. An
index is used to implement binary search by symbol value. Lookups by
name are comparatively rare and are thus still implemented with a linear
search, but support for a binary search by name would be straightforward
to add if needed.
When looking up an object by name, allow prefix matches if no direct match
is found. This allows one to, for example, match libc entry probes with:
# dtrace -n 'pid$target:libc.so::entry' -c ./foo
instead of requiring "libc.so.7" or a glob.
Also remove proc_obj2map() as it currently just duplicates the
functionality of proc_name2map(). It's supposed to take a Solaris
link-map ID as a paramter, but support for this isn't implemented and
isn't required to support DTrace's pid provider.
libproc previously created a new handle for each symbol lookup, which
gives rather egregious performance for DTrace's ustack() action. With
this change libproc will cache the libelf descriptor upon access, making
lookups much faster in the common case.
As of r278658 libproc looks for debug files under /usr/lib/debug and will
use them if available. This change fleshes out that support a bit further:
- Check for a .gnu_debuglink section and use the file name specified
there if one is present.
- Validate external debug files with the CRC in the .gnu_debuglink
section so as to avoid using stale or corrupt debug files.
- Search for debug files in the directory containing the referencing
object or in the .debug subdirectory, as GDB does.
This allows librtld_db to fetch the PID from a handle without calling into
libproc. Together with r303531, this means that librtld_db no longer
references symbols from libproc.
Sync libarchive with vendor.
Vendor bugfixes:
libarchive #831:
Spelling fixes
libarchive #832:
Relax sanity checks of number fields in tar header even more
OSS-Fuzz #16:
Fix possible hang in uudecode_filter_read()
OSS-Fuzz #220:
Reject an 'ar' filename table larger than 1GB or a filename larger
than 1MB.
MFC after: 1 week
Avoid always using an O(n^2) loop over known syscall structures with
strcmp() on each system call. Instead, use a per-ABI cache indexed by
the system call number. The first 1024 system calls (which should cover
all of the normal system calls in currently-supported ABIs) use a flat array
indexed by the system call number to find system call structure. For other
system calls, a linked list of structures storing an integer to structure
mapping is stored in the ABI. The linked list isn't very smart, but it
should only be used by buggy applications invoking unknown system calls.
This also fixes handling of unknown system calls which currently trigger
a NULL pointer dereference.
Reviewed by: kib
MFC after: 2 weeks
If the bus number assigned to a Host-PCI bridge doesn't match the first
bus number in the associated producer range from _CRS, print a warning and
fail to attach rather than panicking due to an assertion failure.
At least one single-socket Dell machine leaves a "ghost" Host-PCI bridge
device in the ACPI namespace that seems to correspond to the I/O hub in
the second socket of a two-socket machine. However, the BIOS doesn't
configure the settings for this "ghost" bridge correctly, nor does it have
any PCI devices behind it.
Tested by: royger
MFC after: 2 weeks
Vendor bugfixes:
libarchive #831:
Spelling fixes
libarchive #832:
Relax sanity checks of number fields in tar header even more
OSS-Fuzz #16:
Fix possible hang in uudecode_filter_read()
OSS-Fuzz #220:
Reject an 'ar' filename table larger than 1GB or a filename larger
than 1MB.
This change includes firmware commands for key setup +
some additional checking via CAMREAD / CAMWRITE registers.
Nothing (except rsu_delete_key() for pairwise keys) is deferred;
to ensure that things are done in order rsu_set_key() will wait
until key deletion task will be finished.
Tested with Asus USB-N10 (all ciphers).
Differences from initial (reviewed) patch:
- Pause AC queues before disassociation - since CMD_DISCONNECT clears
crypto state all pending frames must be processed / dropped before it.
- Check sc_running flag before trying to set static keys.
- Clear key index from bitmap even when firmware command fails
(it will be invalidated via CAMWRITE anyway).
Reviewed by: adrian, kevlo
Tested by: kevlo
Differential Revision: https://reviews.freebsd.org/D8706
The NFSv4.1 server failed to update the nfs-stablerestart file for
a client when the client was issued its first Open. As such, recovery
of Opens after a server reboot failed with NFSERR_NOGRACE.
This patch fixes this.
It also changes the code so that it malloc()'s the 1024 byte array
instead of allocating it on the kernel stack for both NFSv4.0 and NFSv4.1.
Note that this bug only affected NFSv4.1 and only when clients attempted
to reclaim Opens after a server reboot.
MFC after: 2 weeks
subrulenr is considered unset if it's set to -1, not if it's set to 1.
See contrib/tcpdump/print-pflog.c pflog_print() for a user.
This caused incorrect pflog output (tcpdump -n -e -ttt -i pflog0):
rule 0..16777216(match)
instead of the correct output of
rule 0/0(match)
PR: 214832
Submitted by: andywhite@gmail.com
file into smaller pieces that are hopefully easier to understand
and extend. This is to pave the ground for adding few more
socket timestamp formats that I am working on here.
No functional changes (I hope).
- Append RCR_APP_PHYSTS bit after firmware loading - otherwise
firmware will reset the register and this modification will be lost.
(without it Rx PHY descriptor section will contain garbage).
- Check if R92S_RXDW0_PHYST bit is set (like it is done in rtwn(4)) -
even if infosz is non-zero the section may not contain anything useful.
- In case, if descriptor is absent (A-MPDU?) use last calibrated RSSI
(rtwn(4) uses RSSI from the previous (sub)frame; probably, this
approach should be used here too).
Tested with Asus USB-N10, STA mode.
wait(2).
- Do not acquire the process spinlock if neither WTRAPPED nor WUNTRACED
options were passed [1].
- Extract the code to report alive process into a new helper
report_alive_proc() and use it for trapped, stopped and continued
childrens.
Note that the process spinlock is required around the WTRAPPED and
WUNTRACED tests, because P_STOPPED_TRACE and P_STOPPED_SIG flags are
set before other threads are stopped at the suspension point, and that
threads increment p_suspcount while owning only the process spinlock,
the process lock is dropped by them. If the spinlock is not taken for
tests, the syscall thread might miss both p_suspcount increment and
wakeup in wakeup in thread_suspend_switch().
Based on the submission by: mjg [1]
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- EMC clock have standard peripheral clock block. Use it.
- Implement full frequency set method for PLLD2. This PLL
is used as HDMI pixel clock so we must be able to set it
to wide range of frequencies, within 5% tolerance allowed
by HDMI specification. Due to this, full state space search
(over m, n, p fields) is necessary.
MFC after: 3 weeks
