The MSR[EE] bit does not require synchronization when changing. This is a
trivial micro-optimization, removing the trailing isync from mtmsr().
MFC after: 1 week
It's invalid to reference a C++ string's c_str() buffer after the object
goes out of scope. Adjust the scope of the string to match the use in
write(2) to fix the misuse.
CID: 1393383
Reported by: Coverity
If MDS mitigation is enabled by the tunable but MDS microcode is not
early-loaded, software mitigation is selected. This causes
initializecpu() to try to allocate memory which makes boot process
very unhappy.
Create SYSINIT that runs sufficiently late to succeed.
Reported by: naddy
PR: 237968
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
found by Coverity. However, upon closer inspection the implementation of
fsck_ffs's fsck_readdir() and dircheck() functions is both nearly impossible
to follow and fails to check / fix directories in several cases. So, this
revision is an entire rewrite of these two functions to clarify what they
are doing and also to get something that works properly.
Referred by: cem
Reviewed by: kib, David G Lawrence
MFC after: 3 days
CID 1401317: namlen may be used uninitialized
There were several (apparently) copy-pasted NEED validation macros,
leading to the same error string for different issues. Change the
YP and NTP tags so they are distinct.
PR: 30863
Submitted by: Dan Lukes <dan@obluda.cz>
Reviewed by: markj
MFC after: 1 week
Event: Waterloo Hackathon 2019
This allows the user to enable, disable, and adjust the I/O deadman at
runtime. This can be especially useful when a pool is backed by remote
storage (such as iscsi, ggated, etc).
PR: 221906
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
MFC after: 1 week
Sponsored by: Klara Systems
Event: Waterloo Hackathon 2019
"." and ".." names are not maintained in the mqueuefs dirent datastructure and
cannot be opened as mqueues. Creating or removing them is invalid; return
EINVAL instead of crashing.
PR: 236836
Submitted by: Torbjørn Birch Moltu <t.b.moltu AT lyse.net>
Discussed with: jilles (earlier version)
Previously, if a system had multiple batteries, the remaining life
percentage was calculated as the average of each battery's percent
remaining. This results in rather incorrect values when you consider the
case of the Thinkpad X270 that has a small 3 cell internally battery, and
a hot-swappable 9 cell battery that is used first. Battery 0 is at 100%,
but battery 1 is at 10%, you do not infact have 55% of your capacity
remaining.
The new method calculates the percentage based on remaining capacity
out of total capacity, giving a much more accurate reading.
PR: 229818
Submitted by: Keegan Drake H.P. <kd-dev@pm.me>
MFC after: 2 weeks
Sponsored by: Klara Systems
Event: Waterloo Hackathon 2019
Similar to r348026, exhaustive search for uses of CTRn() and cross reference
ktr.h includes. Where it was obvious that an OS compat header of some kind
included ktr.h indirectly, .c files were left alone. Some of these files
clearly got ktr.h via header pollution in some scenarios, or tinderbox would
not be passing prior to this revision, but go ahead and explicitly include it
in files using it anyway.
Like r348026, these CUs did not show up in tinderbox as missing the include.
Reported by: peterj (arm64/mp_machdep.c)
X-MFC-With: r347984
Sponsored by: Dell EMC Isilon
to then try to reproduce a kernel panic, which turned out to be a
race condition and hard to test from here.
Commit the changes anywhere as the "bind zero" case was a surprise
to me and we should try to maintain this status.
Also it is easy examples someone can build upon.
With help from: markj
Event: Waterloo Hackathon 2019
that we end up in a consistent locking state at the end of
udp_output() in order to be able to see what the values are based
on which we once took a decision (note: some values may have changed).
This helped to debug a syzkaller report.
MFC after: 2 months
Event: Waterloo Hackathon 2019
Using the latest NVIDIA driver, upon resuming from suspend with X
running the display remained blank. Additionally OpenGL applications
that were running triggered a number of error messages from the NVIDIA
driver.
This occurred because the vt efifb back-end did not signal the X server
to release the display before suspending (or to re-acquire it after
resuming). The NVIDIA driver includes code for smoothly shutting down
and re-initializing the GPU, which was not getting called.
Since the NVIDIA driver doesn't currently support framebuffer devices
and vt is forced to fall back to the efifb back-end, add vd_suspend and
vd_resume members to connect the suspend/resume path. This ensures the
X server is properly able to re-initialize the display.
PR: 237050
Submitted by: Erik Kurzinger <ekurzinger@nvidia.com>
Reviewed by: markj
MFC after: 2 weeks
Event: Waterloo Hackathon 2019
NDFREE() calculates unlock_dvp after ndp->ni_vp is unlocked and zeroed
out. This makes the comparision of ni_dvp with ni_vp always fail.
Move the calculation of unlock_dvp right after unlock_vp, so that the
code sees correct ni_vp value.
Reproduced by
chdir("/usr");
open("/..", O_BENEATH | O_RDONLY);
Reported by: syzkaller
Reviewed by: markj, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20304
are able to determine some virtual machines, but the vm_guest variable was
still only being set to VM_GUEST_VM.
Since we do know what some of them specifically are, we can set vm_guest
appropriately.
Also, if we see the CPUID has the HV flag, but we were unable to find a
definitive vendor in the Hypervisor CPUID Information Leaf, fall back to
the older detection methods, as they may be able to determine a specific
HV type.
Add VM_GUEST_PARALLELS value to VM_GUEST for Parallels.
Approved by: cem
Differential Revision: https://reviews.freebsd.org/D20305
I have contributed a number of changes to these tests over the past few
hundred revisions, and believe I deserve credit for the changes I have
made (plus, the copyright hadn't been updated since 2014).
MFC after: 1 week
This is not completely necessary today, but this change is being made in a
conservative manner to avoid accidental breakage in the future, if this ever
was a unicode string.
PR: 237403
MFC after: 1 week
In python 3, the default encoding was switched from ascii character sets to
unicode character sets in order to support internationalization by default.
Some interfaces, like ioctls and packets, however, specify data in terms of
non-unicode encodings formats, either in host endian (`fcntl.ioctl`) or
network endian (`dpkt`) byte order/format.
This change alters assumptions made by previous code where it was all
data objects were assumed to be basestrings, when they should have been
treated as byte arrays. In order to achieve this the following are done:
* str objects with encodings needing to be encoded as ascii byte arrays are
done so via `.encode("ascii")`. In order for this to work on python 3 in a
type agnostic way (as it anecdotally varied depending on the caller), call
`.encode("ascii")` only on str objects with python 3 to cast them to ascii
byte arrays in a helper function name `str_to_ascii(..)`.
* `dpkt.Packet` objects needing to be passed in to `fcntl.ioctl(..)` are done
so by casting them to byte arrays via `bytes()`, which calls
`dpkt.Packet__str__` under the covers and does the necessary str to byte array
conversion needed for the `dpkt` APIs and `struct` module.
In order to accomodate this change, apply the necessary typecasting for the
byte array literal in order to search `fop.name` for nul bytes.
This resolves all remaining python 2.x and python 3.x compatibility issues on
amd64. More work needs to be done for the tests to function with i386, in
general (this is a legacy issue).
PR: 237403
MFC after: 1 week
Tested with: python 2.7.16 (amd64), python 3.6.8 (amd64)
Even though some python styles suggest there should be multiple newlines between
methods/classes, for consistency with the surrounding code, it's best to be
consistent by having merely one newline between each functional block.
MFC after: 1 week
Make `KAT(CCM)?Parser` into a context suite-capable object by implementing
`__enter__` and `__exit__` methods which manage opening up the file descriptors
and closing them on context exit. This implementation was decided over adding
destructor logic to a `__del__` method, as there are a number of issues around
object lifetimes when dealing with threading cleanup, atexit handlers, and a
number of other less obvious edgecases. Plus, the architected solution is more
pythonic and clean.
Complete the iterator implementation by implementing a `__next__` method for
both classes which handles iterating over the data using a generator pattern,
and by changing `__iter__` to return the object instead of the data which it
would iterate over. Alias the `__next__` method to `next` when working with
python 2.x in order to maintain functional compatibility between the two major
versions.
As part of this work and to ensure readability, push the initialization of the
parser objects up one layer and pass it down to a helper function. This could
have been done via a decorator, but I was trying to keep it simple for other
developers to make it easier to modify in the future.
This fixes ResourceWarnings with python 3.
PR: 237403
MFC after: 1 week
Tested with: python 2.7.16 (amd64), python 3.6.8 (amd64)
In version 3.2+, `array.array(..).tostring()` was renamed to
`array.array(..).tobytes()`. Conditionally call `array.array(..).tobytes()` if
the python version is 3.2+.
PR: 237403
MFC after: 1 week
This was enumerated with exhaustive search for sys/eventhandler.h includes,
cross-referenced against EVENTHANDLER_* usage with the comm(1) utility. Manual
checking was performed to avoid redundant includes in some drivers where a
common os_bsd.h (for example) included sys/eventhandler.h indirectly, but it is
possible some of these are redundant with driver-specific headers in ways I
didn't notice.
(These CUs did not show up as missing eventhandler.h in tinderbox.)
X-MFC-With: r347984
This change properly terminates the formatting string quote modification done
in r348005, which is triggered when `ELF_VERBOSE` is defined.
MFC with: r348005
Reported by: ci (amd64, gcc)
Replace uses of `foo.encode("hex")` with `binascii.hexlify(foo)` for forwards
compatibility between python 2.x and python 3.
PR: 237403
MFC after: 1 week
These are obviously missing from the .c files, but don't show up in any
tinderbox configuration (due to latent header pollution of some kind). It
seems some configurations don't have this pollution, and the includes are
obviously missing, so go ahead and add them.
Reported by: Peter Jeremy <peter AT rulingia.com>
X-MFC-With: r347984
all-ones then carving out blocks of zeroes where specified values go, init
it to all-zeroes, put in ones where values need to be masked, then use it
as value &= ~sc_led_modes_mask. In addition to being more idiomatic, this
means everything related to FDT data is initialized to zero along with the
rest of the softc, and that allows removing some #ifdef FDT sections and
wrapping the whole muge_set_leds() function in a single ifdef block.
This also deletes the early-out from muge_set_leds() when an eeprom exists.
Even if there is an eeprom with led config in it, the fdt data (if present)
should override that, because the user is in control of the fdt data.
OTP registers (because the user is in control of the fdt data). Remove the
early returns from the code that tries to find a good mac address, so that
the execution always flows through the routine to get an address from FDT
data last, when on FDT-enabled systems.
the device instance, and to get the MAC address for the device instance.
The ad-hoc code this replaces could find the wrong instance if multiple
devices were present.
The .init and .fini epilogues from crtn should be placed immediately
after any instructions in .init and .fini sections from the linked
objects. Using 16-byte alignment for the epilogues on MIPS was a bug,
but it did not cause any issue with GNU ld as GNU ld (2.17.50) fills the
padding with NOPs.
Current versions of LLD fill any padding between different object files
with trap instructions. Inserting trap padding prior to the .init/.fini
epilogue is undesriable as the resulting binary will crash at runtime.
The .init and .fini sections in object files linked between crti and
crtn must already be a multiple of the instruction size and so no
alignment directive is required in crtn. Indeed, other architectures
(except sparc64) do not specify alignment in their crtn implementations.
Reported by: arichardson
Reviewed by: andrew
Event: Waterloo Hackathon 2019
Differential Revision: https://reviews.freebsd.org/D18291
Also use LED mode settings from the FDT to set the PHY.
From v3 of the patch submitted in the PR.
I moved the sc_led_modes and sc_led_modes_mask default setting outside
of the #ifdef FDT case.
PR: 237325
Submitted by: Ralf <iz-rpi03@hs-karlsruhe.de>
Reviewed by: ian
MFC after: 2 weeks
MFC with: r348001
Event: Waterloo Hackathon 2019
Differential Revision: https://reviews.freebsd.org/D20325
