code alongside the existing implementation and quickly toggle between
the two implementations when testing. Once the new code is past its
teething stage we can remove this option.
to automatically set the armv6 option when MACHINE_ARCH is armv6. That
allows replacing ever-growing lists of cpu names as options to compile
a given file with the using either "optional armv6" or "optional !armv6".
Multipass device attachment was tested on many arm platforms by users and
only success was reported on the arm@ mailing list. This is just the
long-delayed followup of making it the default.
Multipass attachment is necessary when using vendor-supplied FDT data,
because our devices may need to be attached in a different order than they
are described in the FDT data.
device attachment on arm platforms. If this is defined, nexus attaches
early in BUS_PASS_BUS, and other busses and devices attach later, in the
pass number they are set up for. Without it defined, nexus attaches in
BUS_PASS_DEFAULT and thus so does everything else, which is status quo.
Arm platforms which use FDT data to enumerate devices have been relying
on devices being attached in the exact order they're listed in the dts
source file. That's one of things currently preventing us from using
vendor-supplied fdt data (because then we don't control the order of the
devices in the data). Multi-pass attachment can go a long way towards
solving that problem by ensuring things like clock and interrupt drivers
are attached before the more mundane devices that need them.
The long-term goal is to have all arm fdt-based platforms using multipass.
This option is a bridge to that, letting us enable it selectively as
platforms are converted and tested (the alternative being to just throw
a big switch and try to fight fires as they're reported).
platform code, it is expected these will be merged in the future when the
ARM code is more complete.
Until more boards can be tested only use this with the Raspberry Pi and
rrename the functions on the other SoCs.
Reviewed by: ian@
be used in MI code.
This is intended as a temporary measure to unbreak the build. The real fix
is to write event timer drivers for legacy arm hardware, then get rid of
this option completely. That's going to take a few days.
never actually ran on these chips (other than using SA1 support in an
emulator to do the early porting to FreeBSD long long ago). The clutter
and complexity of some of this code keeps getting in the way of other
maintenance, so it's time to go.
This was an optimization used only by a few xscale platforms. Part of
the optimization was to create a direct map for all physical pages, and
that resulted in making multiple mappings of pages in a way that bypassed
the logic in pmap.c to handle VIVT cache aliasing. It also just generally
made the code more complex and hard to maintain for all SoCs.
Reviewed by: cognet
Qualcomm Snapdragon S4 and Snapdragon 400/600/800 SoCs and has architectural
similarities to ARM Cortex-A15. As for development boards IFC6400 series embedded
boards from Inforce Computing uses Snapdragon S4 Pro/APQ8064.
Approved by: stas (mentor)
PV entries are now roughly half the size.
Instead of using a shared UMA zone for 28 byte pv entries
(two 8-byte tailq nodes, a 4 byte pointer, a 4 byte address and 4 byte
flags), we allocate a page at a time per process.
This provides 252 pv entries per process (actually, per pmap address space)
and eliminates one of the 8-byte tailq entries since we now can track
per-process pv entries implicitly.
The pointer to the pmap can be eliminated by doing address arithmetic to
find the metadata on the page headers to find a single pointer shared by
all 252 entries. There is an 8-int bitmap for the freelist of those 252
entries.
When in serious low memory condition, allocation of another pv_chunk is
possible by freeing some pages in pmap_pv_reclaim().
Added pv_entry/pv_chunk related statistics to pmap.
pv_entry/pv_chunk statistics can be accessed via sysctl vm.pmap.
Ported PTE freelist of KVA allocation and maintenance from i386.
Using an idea from Stephan Uphoff, use the empty pte's that correspond
to the unused kva in the pv memory block to thread a freelist through.
This allows us to free pages that used to be used for pv entry chunks
since we can now track holes in the kva memory block.
As both ARM pmap.c and pmap-v6.c use the same header and pv_entry, pmap and
md_page structures are different, it was needed to separate code designed
for ARMv6/7 from the one for other ARMs.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation, Semihalf
Cummulative patch of changes that are not vendor-specific:
- ARMv6 and ARMv7 architecture support
- ARM SMP support
- VFP/Neon support
- ARM Generic Interrupt Controller driver
- Simplification of startup code for all platforms
arm platform. Add all the atmel boards to the ATMEL kernel for
testing purposes. Until boot loader arg parsing of baord type
is done, this won't actually be able to do the runtime selection.
redboot. Support is very preiminary and likely needs some work. Also,
do some minor code shuffling of the FreeBSD /boot/loader metadata
parsing code. This code is preliminary and should be used with
caution.
is enabled, sets values based on the metadata passed in. Otherwise
fake_preload_metadata is called. Change the default parse_boot_param
to default_parse_boot_param. Enable this functionality only on the mv
platform, which is where most of the code is from.
Reviewed by: cognet, Ian Lapore
used in the code which needs to implement some specific
behaviour when being run under QEMU.
- Make PXA UART probe code to work under QEMU gumstix, which
doesn't emulate all the ports properly.
The following systems are involved:
- DB-88F5182
- DB-88F5281
- DB-88F6281
- DB-78100
- SheevaPlug
This overhaul covers the following major changes:
- All integrated peripherals drivers for Marvell ARM SoC, which are
currently in the FreeBSD source tree are reworked and adjusted so they
derive config data out of the device tree blob (instead of hard coded /
tabelarized values).
- Since the common FDT infrastrucutre (fdtbus, simplebus) is used we say
good by to obio / mbus drivers and numerous hard-coded config data.
Note that world needs to be built WITH_FDT for the affected platforms.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation.
previously know by StarSemi STR9104.
Tested by the submitter on an Emprex NSD-100 board.
Submitted by: Yohanes Nugroho <yohanes at gmail.com>
Reviewed by: freebsd-arm, stas
Obtained from: //depot/projects/str91xx/...
per platform requirements.
Notes:
- Only used by mge(4) at the moment.
- This is very simplified approach and should be replaced by some long-term
solution for managing the board/platform configuration (among others the
MAC-PHY binding info).
Submitted by: Michal Hajduk
Obtained from: Semihalf
o recognize ixp435 cpu
o change memory layout for for ixp4xx to not assume memory is aliases
to 0x10000000 (Cambria/ixp435 memory starts at zero)
o handle 64 irqs for ixp435
o dual EHCI USB 2.0 controller integral to ixp435
o overhaul NPE code for ixp435 and better MAC+MII naming
o updated NPE firmware (including NPE-A image for ixp435/ixp465)
o Gateworks Cambria board support:
- IDE compact flash
- MCU
- front panel LED on i2c bus
- Octal LED latch
Sanity-tested with NFS-root on Avila and Cambria boards. Requires
pending boot2 mods for CF-boot on Cambria.
contents.
- It is possible to override the dynamic configuration by using
AT91C_MAIN_CLOCK option in kernel config.
PR: arm/128961 (based on)
Submitted by: Bjorn Konig <bkoenig@alpha-tierchen.de>
Reviewed by: imp
Approved by: kib (mentor, implicit)
* Orion
- 88F5181
- 88F5182
- 88F5281
* Kirkwood
- 88F6281
* Discovery
- MV78100
The above families of SOCs are built around CPU cores compliant with ARMv5TE
instruction set architecture definition. They share a number of integrated
peripherals. This commit brings support for the following basic elements:
* GPIO
* Interrupt controller
* L1, L2 cache
* Timers, watchdog, RTC
* TWSI (I2C)
* UART
Other peripherals drivers will be introduced separately.
Reviewed by: imp, marcel, stass (Thanks guys!)
Obtained from: Marvell, Semihalf
boards. This is enough to net-boot to multiuser.
Also supported is the SMSC LAN91C111 parts used on the netCF, netDUO and netMMC
add-on boards.
I'll be putting some instructions on how to boot this on the Gumstix boards
online soon.
This is still fairly rough and will be refined over time but I felt it was
better to get this out there where other people can help out.
mapped at, and LOADERRAMADDR, the address at which the loader maps the ram at
at the time the kernel is booted.
They are used to detect if the kernel is booted from the onboard flash.
Define those for the IQ31244
whole the physical memory, cached, using 1MB section mappings. This reduces
the address space available for user processes a bit, but given the amount of
memory a typical arm machine has, it is not (yet) a big issue.
It then provides a uma_small_alloc() that works as it does for architectures
which have a direct mapping.
Add a new option, SKYEYE_WORKAROUNDS, which as the name suggests adds
workarounds for things skyeye doesn't simulate. Specifically :
- Use USART0 instead of DBGU as the console, make it not use DMA, and manually provoke an interrupt when we're done in the transmit function.
- Skyeye maintains an internal counter for clock, but apparently there's
no way to access it, so hack the timecounter code to return a value which
is increased at every clock interrupts. This is gross, but I didn't find a
better way to implement timecounters without hacking Skyeye to get the
counter value.
- Force the write-back of PTEs once we're done writing them, even if they
are supposed to be write-through. I don't know why I have to do that.
