4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
* msun/man/sinh.3:
* msun/man/tanh.3:
. Fix grammar.
* msun/src/e_coshl.c:
* msun/src/e_sinhl.c:
. Fix comment.
* msun/src/s_tanhl.c:
. Remove unused variables.
. Fix location/indentation of comments.
. Use comparison involving ints instead of long double.
. Re-order polynomial evaluation on ld128 for |x| < 0.25.
For now, retain the older order in an "#if 0 ... #else" block.
. Use int comparison to short-circuit the |x| < 1.5 condition.
Requested by: bde
(Note: this change is not applicable to FreeBSD and the file
is not included in build. It's integrated for completeness).
4128 disks in zpools never go away when pulled
illumos/illumos-gate@39cddb10a3
MFC after: 2 weeks
3306 zdb should be able to issue reads in parallel
3321 'zpool reopen' command should be documented in the man page
and help message
illumos/illumos-gate@31d7e8fa33
FreeBSD porting notes: the kernel part of this changeset depends
on Solaris buf(9S) interfaces and are not really applicable for
our use. vdev_disk.c is patched as-is to reduce diverge from
upstream, but vdev_file.c is left intact.
MFC after: 2 weeks
no longer any need for the page's PG_CACHED and PG_FREE flags to be set and
cleared while the free page queues lock is held. Thus, vm_page_alloc(),
vm_page_alloc_contig(), and vm_page_alloc_freelist() can wait until after
the free page queues lock is released to clear the page's flags. Moreover,
the PG_FREE flag can be retired. Now that the reservation system no longer
uses it, its only uses are in a few assertions. Eliminating these
assertions is no real loss. Other assertions catch the same types of
misbehavior, like doubly freeing a page (see r260032) or dirtying a free
page (free pages are invalid and only valid pages can be dirtied).
Eliminate an unneeded variable from vm_page_alloc_contig().
Sponsored by: EMC / Isilon Storage Division
executable ksh scripts. These are currently not copied into the test
directory the way that compiled executables are, so the tests which make use
of them cannot work. This changes the test Makefile to copy the scripts into
the test directory.
Atmel boards I have.
# All Samsung, Toshiba and SanDisk parts will need to be in this table
# since they don't conform to the ONFI specification (they are all Toggle
# parts). There's some standards for the additional bytes so there's some hope
# to decode them automatically on a per-vendor basis, but even that has
# problems (and is what motivated the ONFI parameter page).
header is split out into its own BD for processing by the firmware. When
this split occurred the data length in the BD was not being set correctly
resulting in packet corruption.
Approved by: davidcd (mentor)
modules which require this flag to compile. Use a GCC_MS_EXTENSIONS
variable, defined in kern.pre.mk, which can be used to easily supply the
flag (or not), depending on the compiler type.
MFC after: 3 days
directly to the linker (LD_FLAGS) from flags passed indirectly, via the
compiler driver (LDFLAGS).
This is because several Makefiles under sys/boot/i386 and sys/boot/pc98
use ${LD} directly to link, and the normal LDFLAGS value should not be
used in these cases.
MFC after: 3 days
aggregation IDs, as is done in the upstream illumos code. This still
requires some FreeBSD-specific code, as our vmem API is not identical to the
one in illumos.
Submitted by: Mike Ma <mikemandarine@gmail.com>
by receive code waiting for data digest even when the data segment was
empty. It didn't actually read it, but it waited until those four bytes
become available in the socket buffer, i.e. until any other PDU (such as NOP)
came in.
PR: kern/185240
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
bits of the flowid as each other, resulting in a poor distribution of
packets among queues in certain cases. Work around this by adding a
set of sysctls for controlling a bit-shift on the flowid when doing
multi-port aggrigation in lagg and lacp. By default, lagg/lacp will
now use bits 16 and higher instead of 0 and higher.
Reviewed by: max
Obtained from: Netflix
MFC after: 3 days
errors have been detected in a particular run.
Clean up the global state variables so that a restart can happen correctly.
Separate the global variables in fsck_ffs and fsdb to their own file. This
fixes header sharing with fscd.
Correctly initialize, static-ize, and remove global variables as needed in
dir.c. This fixes a problem with lost+found directories that was causing
a segfault.
Correctly initialize, static-ize, and remove global variables as needed in
suj.c.
Initialize the suj globals before allocating the disk object, not after.
Also ensure that 'preen' mode doesn't conflict with 'restart' mode
Submitted by: scottl, max
Reviewed by: max, mckusick (earlier version)
Obtained from: Netflix
MFC after: 3 days
. Hook coshl, sinhl, and tanhl into libm.
. Create symbolic links for corresponding manpages.
. While here remove a nearby extraneous space.
* Symbol.map:
* src/math.h:
. Move coshl, sinhl, and tanhl to their proper locations.
* man/cosh.3:
* man/sinh.3:
* man/tanh.3:
. Update the manpages.
* src/e_cosh.c:
* src/e_sinh.c:
* src/s_tanh.c:
. Add weak reference for LBDL_MANT_DIG==53 targets.
* src/imprecise.c:
. Remove the coshl, sinhl, and tanhl kludge.
* src/e_coshl.c:
. ld80 and ld128 implementation of coshl().
* src/e_sinhl.c:
. ld80 and ld128 implementation of sinhl().
* src/s_tanhl.c:
. ld80 and ld128 implementation of tanhl().
Obtained from: bde (mostly), das and kargl
* ld128/k_expl.h:
. Split out a computational kernel,__k_expl(x, &hi, &lo, &k) from expl(x).
x must be finite and not tiny or huge. The kernel returns hi and lo
values for extra precision and an exponent k for a 2**k scale factor.
. Define additional kernels k_hexpl() and hexpl() that include a 1/2
scaling and are used by the hyperbolic functions.
* ld80/s_expl.c:
* ld128/s_expl.c:
. Use the __k_expl() kernel.
Obtained from: bde
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
devices.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
MFC after: 1 week
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
MFC after: 1 week
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Nuke dupe $FreeBSD$.
MFC after: 1 week
hw.ral.msi_disable (defaulting to using MSI).
- Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
devices.
- Use PCIR_BAR instead of a homegrown macro.
- There's no need to keep track of resource IDs.
- Release resources again in case attaching fails.
- Quiesce the interrupt before detaching.
- Sprinkle const.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.
- Trim headers.
- Nuke dupe $FreeBSD$.
MFC after: 1 week
an interface:
- in in_control() skip over not AF_INET addresses.
- in in_aifaddr_ioctl() and in_difaddr_ioctl() do correct check
of address family, w/o accessing memory beyond struct ifaddr.
Sponsored by: Nginx, Inc.
- #if 0 the currently unused paired port linking and unlinking of dual
adapters.
- Simplify MSI/MSI-X allocation and release. For a single one, we don't need
to fiddle with the MSI/MSI-X count and pci_release_msi(9) is smart enough
to just do nothing in case of INTx.
- Canonicalize actions taken on attach failure and detach.
- Remove the remainder of incomplete support for older FreeBSD versions.
MFC after: 1 week
