While porting over the local changes from CheriBSD for upstreaming, I
accidentally committed a broken version of find_entry_point(): we have to
return NULL if the value is not found instead of a value with
ep->name == NULL, since the checks in main were changed to check ep instead
of ep->name for NULL.
This only matters if the crunched tool cannot be found using normal lookup
and one of the fallback paths is used, so it's unlikely to be triggered
in rescue. However, I noticed that one of our CheriBSD test scripts was
failing to run commands under `su` on minimal disk images where all
binaries are hardlinks to a `cheribsdbox` tool generated with crunchgen.
This also updates the bootstrapping check in Makefile.inc1 to bootstrap
crunchgen up to the next version bump.
Reviewed By: kevans
Differential Revision: https://reviews.freebsd.org/D27474
bsdgrep switched over to libregex back in r363823 to fill
WITH_GNU_GREP_COMPAT, since libgnuregex in base is quite buggy and libregex
is somewhat functional. Don't build libgnuregex on our account, please.
PRR improves loss recovery and avoids RTOs in a wide range
of scenarios (ACK thinning) over regular SACK loss recovery.
PRR is disabled by default, enable by net.inet.tcp.do_prr = 1.
Performance may be impeded by token bucket rate policers at
the bottleneck, where net.inet.tcp.do_prr_conservate = 1
should be enabled in addition.
Submitted by: Aris Angelogiannopoulos
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D18892
This is a valid scenario that's handled in the various protocol layers where
it makes sense (e.g., tcp_disconnect and sctp_disconnect). Given that it
indicates we should immediately drop the connection, it makes little sense
to sleep on it.
This could lead to panics with INVARIANTS. On non-INVARIANTS kernels, this
could result in the thread hanging until a signal interrupts it if the
protocol does not mark the socket as disconnected for whatever reason.
Reported by: syzbot+e625d92c1dd74e402c81@syzkaller.appspotmail.com
Reviewed by: glebius, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27407
Multiple consumers like ipfw, netflow or new route lookup algorithms
need to get the prefix data out of struct rtentry.
Instead of providing direct access to the rtentry, create IPv4/IPv6
accessors to abstract struct rtentry internals and avoid including
internal routing headers for external consumers.
While here, move struct route_nhop_data to the public header, so external
customers can actually use lookup functions returning rt&nhop data.
Differential Revision: https://reviews.freebsd.org/D27416
By default, if a TOE TLS socket stops receiving data for more than 5
seconds, revert the connection back to plain TOE mode. This provides
a fallback if the userland SSL library does not support KTLS. In
addition, for client TLS 1.3 sockets using connect(), the TOE socket
blocks before the handshake has completed since the socket option is
only invoked for the final handshake.
The timeout defaults to 5 seconds, but can be changed at boot via the
hw.cxgbe.toe.tls_rx_timeout tunable or for an individual interface via
the dev.<nexus>.toe.tls_rx_timeout sysctl.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27470
This includes mbufs waiting for data from sendfile() I/O requests, or
mbufs awaiting encryption for KTLS.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27469
If TOE TLS is requested for an unsupported cipher suite or TLS
version, disable TLS processing and fall back to plain TOE. In
addition, if an error occurs when saving the decryption keys in the
card's memory, disable TLS processing and fall back to plain TOE.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27468
If a TOE TLS socket ends up using an unsupported TLS version or
ciphersuite, it must be downgraded to a "plain" TOE socket with TLS
encryption/decryption performed on the host. The previous
implementation of this fallback was incomplete and resulted in hung
connections.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27467
Implement computeHostNumHardwareThreads() for FreeBSD
This retrieves CPU affinity via FreeBSD's cpuset(2) API, and makes
LLVM respect affinity settings configured by the user via the
cpuset(1) command.
In particular, this allows to reduce the number of threads used on
machines with high core counts, which can interact badly with
parallelized build systems. This is particularly noticable with lld,
which spawns lots of threads even for linking e.g. hello_world!
This fix is related to PR48193, but does not adress the more
fundamental problem, which is that LLVM by default grabs as many CPUs
and/or threads as possible.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D92271
Originally by: mjg
MFC after: 1 week
landed upstream:
For llvm's internal function which retrieves the number of available
"hardware threads", use cpuset_getaffinity(2) on FreeBSD, so it will
honor processor sets configured by the cpuset(1) command.
This should make it possible to avoid e.g. lld creating a huge number of
threads on a machine with many cores, even for linking simple programs.
This will also be submitted upstream.
Submitted by: mjg
As of r365978, minidumps include a copy of dump_avail[]. This is an
array of vm_paddr_t ranges. libkvm walks the array assuming that
sizeof(vm_paddr_t) is equal to the platform "word size", but that's not
correct on some platforms. For instance, i386 uses a 64-bit vm_paddr_t.
Fix the problem by always dumping 64-bit addresses. On platforms where
vm_paddr_t is 32 bits wide, namely arm and mips (sometimes), translate
dump_avail[] to an array of uint64_t ranges. With this change, libkvm
no longer needs to maintain a notion of the target word size, so get rid
of it.
This is a no-op on platforms where sizeof(vm_paddr_t) == 8.
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27082
The sdt module's load handler iterates over SDT linker sets for the
kernel and all loaded modules to create probes and providers defined by
SDT(9). Probes in one module may belong to a provider in a different
module, but when a probe is created we assume that the provider is
already defined. To maintain this invariant, modify the load handler to
perform two separate passes over loaded modules: one to define providers
and the other to define probes.
The problem manifests when loading linux.ko, which depends on
linux_common.ko, which defines providers used by probes defined in
linux.ko.
Reported by: gallatin
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
* uninitialised variable use
* Using AXGBE_SET_ADV() where it was intended; using AXGBE_ADV()
seems wrong and also causes a compiler warning.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D26839
Note that the public documentation on dtrace.org fails to mention %T and
incorrectly documents %Y. The latter actually uses format "%Y %b %e %T"
where %b is always in C locale.
Discussed with: markj
MFC after: 1 month
Sponsored by: Panzura
DTS node can have this property which configure the burst length
for both TX and RX if it's the same.
This unbreak if_dwc on Allwinner A20 and possibly other boards that
uses this prop.
Reported by: qroxana <qroxana@mail.ru>
It is common for freelists to be starving when a netmap application
stops. Mailbox commands to free queues can hang in such a situation.
Avoid that by not freeing the queues when netmap is switched off.
Instead, use an alternate method to stop the queues without releasing
the context ids. If netmap is enabled again later then the same queue
is reinitialized for use. Move alloc_nm_rxq and txq to t4_netmap.c
while here.
MFC after: 1 week
Sponsored by: Chelsio Communications
hw.physmem tunable allows to limit number of physical memory available to the
system. It's handled in machdep files for x86 and PowerPC. This patch adds
required logic to the consolidated physmem management interface that is used by
ARM, ARM64, and RISC-V.
Submitted by: Klara, Inc.
Reviewed by: mhorne
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D27152
In the PCB struct, we need to match the VSX register file layout
correctly, as the VSRs shadow the FPRs.
In LE, we need to have a dword of padding before the fprs so they end up
on the correct side, as the struct may be manipulated by either the FP
routines or the VSX routines.
Additionally, when saving and restoring fprs, we need to explicitly target
the fpr union member so it gets offset correctly on LE.
Fixes weirdness with FP registers in VSX-using programs (A FPR that was
saved by the FP routines but restored by the VSX routines was becoming 0
due to being loaded to the wrong side of the VSR.)
Original patch by jhibbits.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D27431
Allow fdt devices to be used as debug ports for gdb(4).
A debug console can be specified with the "freebsd,debug-path" property
in the device tree's /chosen node, or using the environment variable
hw.fdt.dbgport.
The device should be specified by its name in the device tree, for
example hw.fdt.dbgport="serial2".
PR: 251053
Submitted by: Dmitry Salychev <dsl@mcusim.org>
Submitted by: stevek (original patch, D5986)
Reviewed by: andrew, mhorne
Differential Revision: https://reviews.freebsd.org/D27422
r367917 fixed the backpressure on the netmap rxq being stopped but that
doesn't help if some other netmap rxq is starved (because it is stopping
too although the driver doesn't know this yet) and blocks the pipeline.
An alternate fix that works in all cases will be checked in instead.
Sponsored by: Chelsio Communications
We intend to remove the obsolete GDB 6.1.1 from FreeBSD before FreeBSD 13.
Reviewed by jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27447
A failure in iflib_device_register() can result in
em_free_pci_resources() being called after receive queues have already
been freed. In particular, a failure to allocate IRQ resources will goto
fail_queues, where IFDI_QUEUES_FREE() will be called via
iflib_tx_structures_free(), preceding the call to IFDI_DETACH().
Cope with this by checking adapter->rx_queues before dereferencing it.
A similar check is present in ixgbe(4) and ixl(4).
MFC after: 1 week
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27260
- in nvme_qpair_process_completions() do dma sync before completion buffer
is used.
- in nvme_qpair_submit_tracker(), don't do explicit wmb() also for arm
and arm64. Bus_dmamap_sync() on these architectures is sufficient to ensure
that all CPU stores are visible to external (including DMA) observers.
- Allocate completion buffer as BUS_DMA_COHERENT. On not-DMA coherent systems,
buffers continuously owned (and accessed) by DMA must be allocated with this
flag. Note that BUS_DMA_COHERENT flag is no-op on DMA coherent systems
(or coherent buses in mixed systems).
MFC after: 4 weeks
Reviewed by: mav, imp
Differential Revision: https://reviews.freebsd.org/D27446
- Avoid leaking a socket if llflags_get() fails.
- Avoid leaking a file handle if rtsold_init_dumpfile() fails.
- Tighten the check in if_nametosdl() which determines whether we failed
to find the specified interface.
- Fix errno handling in an error path in rtsock_open().
MFC after: 1 week
Changing a table from not having counters to having counters (or vice versa)
may trigger panics.
PR: 251414
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27441
When updating a table, pf will keep existing table entry structures
corresponding to addresses that are in both of the old and new tables.
However, the update may also enable or disable per-entry counters which
are allocated separately. Thus when toggling PFR_TFLAG_COUNTERS, the
entries may be missing counters or may have unused counters allocated.
Fix the problem by modifying pfr_ina_commit() to transfer counters
from or to entries in the shadow table.
PR: 251414
Reported by: sigsys@gmail.com
Reviewed by: kp
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27440
Prior to the patch returning selfdfree could still be racing against doselwakeup
which set sf_si = NULL and now locks stp to wake up the other thread.
A sufficiently unlucky pair can end up going all the way down to freeing
select-related structures before the lock/wakeup/unlock finishes.
This started manifesting itself as crashes since select data started getting
freed in r367714.
PR#250770 was actually just a misunderstanding of what
NFS mount options are needed for AmazonEFS mounts.
This patch attempts to clarify the manpage to clarify this.
This is a content change.
PR: 250770
Reviewed by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27430
