That required to increase the LINE field to fit the output of -b.
While here, change the row() function to take a const argument.
In collaboration with: ed
providers and consumers will be destroyed. Before take some actions
with a geom, check that it is not destroyed at the moment.
Tested by: nwhitehorn
MFC after: 1 week
Variable 'rc_force' is accessible only at the time of rc_run_command,
so it can't be examined from the script's main code.
Spotted by: hrs
Reviewed by: hrs, des
Approved by: des
MFC after: 2 weeks
bge(4) sends BGE_FW_CMD_DRV_ALIVE command to firmware every 2
seconds. BGE_FW_CMD_DRV_ALIVE command requires 4 bytes data. This
data contains timeout value in seconds until the next
BGE_FW_CMD_DRV_ALIVE command.
Broadcom recommends driver set the value 3 times longer than the
interval that it sends BGE_FW_CMD_DRV_ALIVE. Currently bge(4) uses
3 seconds so probably we have to increase it in future and use
different ALIVE command(e.g. BGE_FW_CMD_DRV_ALIVE3).
No functional changes.
This bit(SW event 7 in publicly available data sheet) is used to
make RX CPU handle a firmware command and the bit is automatically
cleared after RX CPU completed the command.
Generally firmware command takes the following steps.
1. Write BGE_SRAM_FW_CMD_MB with a command.
2. Write BGE_SRAM_FW_CMD_LEN_MB with the length of the command in bytes.
3. Write BGE_SRAM_FW_CMD_DATA_MB with actual command data.
4. Generate BGE_RX_CPU_EVENT and let firmware handle the command.
5. Wait for the ACK of the firmware command.
No functional changes.
it no longer exists). Instead, run svnversion if we can find the binary
and test that the output looks like a version string.
Reviewed by: discussion on -current@
Tested by: rodrigc for non-svn case (thanks!)
write. This way on first connection we will synchronize only the extents that
were modified during the lifetime of primary node, not entire GEOM provider.
MFC after: 3 days
When booting the system, truncate the utx.active file, but do write the
BOOT_TIME record into it afterwards. This allows one to obtain the boot
time of the system as follows:
struct utmpx u1 = { .ut_type = BOOT_TIME }, *u2;
setutxent();
u2 = getutxid(&u1);
Now, the boot time is stored in u2->ut_tv, just like on Linux and other
systems.
We don't open the utx.active file with O_EXLOCK. It's rather unlikely
that other applications use this database at the same time and I want to
prevent the possibility of deadlocks in init(8).
Discussed with: pluknet
Even though our implementation of utmpx never emits these types of
records, they are part of POSIX. Do print them when they show up in the
database files.
While there, also print the type number of unsupported records.
start only one worker thread. For software crypto it will start by default
N worker threads where N is the number of available CPUs.
This is not optimal if hardware crypto is AES-NI, which uses CPU for AES
calculations.
Change that to always start one worker thread for every available CPU.
Number of worker threads per GELI provider can be easly reduced with
kern.geom.eli.threads sysctl/tunable and even for software crypto it
should be reduced when using more providers.
While here, when number of threads exceeds number of CPUs avilable don't
reduce this number, assume the user knows what he is doing.
Reported by: Yuri Karaban <dev@dev97.com>
MFC after: 3 days
- Operate on uint64_t types when doing XORing, etc. instead of uint8_t.
- Don't bzero() temporary block for every AES block. Do it once for entire
data block.
- AES-NI is available only on little endian architectures. Simplify code
that takes block number from IV.
Benchmarks:
Memory-backed md(4) device, software AES-XTS, 4kB sector:
# dd if=/dev/md0.eli bs=1m
59.61MB/s
Memory-backed md(4) device, old AES-NI AES-XTS, 4kB sector:
# dd if=/dev/md0.eli bs=1m
97.29MB/s
Memory-backed md(4) device, new AES-NI AES-XTS, 4kB sector:
# dd if=/dev/md0.eli bs=1m
221.26MB/s
127% performance improvement between old and new code.
Harddisk, raw speed:
# dd if=/dev/ada0 bs=1m
137.63MB/s
Harddisk, software AES-XTS, 4kB sector:
# dd if=/dev/ada0.eli bs=1m
47.83MB/s (34% of raw disk speed)
Harddisk, old AES-NI AES-XTS, 4kB sector:
# dd if=/dev/ada0.eli bs=1m
68.33MB/s (49% of raw disk speed)
Harddisk, new AES-NI AES-XTS, 4kB sector:
# dd if=/dev/ada0.eli bs=1m
108.35MB/s (78% of raw disk speed)
58% performance improvement between old and new code.
As a side-note, GELI with AES-NI using AES-CBC can achive native disk speed.
MFC after: 3 days
thing when changing the debugging options as part of head becoming a new
stable branch. It may also help people who for one reason or another want
to run head but don't want it slowed down by the debugging support.
Reviewed by: kib
more general VM system interfaces. So, their implementation can now
reside in kern_malloc.c alongside the other functions that are declared
in malloc.h.
about the various driver events like load, unload, reset, suspend,
restart, and ioctl operations.
Define driver's event rather than using hard-coded values. We don't
still send suspend/resume event to firmware.
Previously bge(4) used BGE_SDI_STATUS to send events. Because driver
has to access firmware mail box to inform current state, using
BGE_SDI_STATUS register was wrong. The end result was the same as
BGE_SDI_STATUS is 0x0C04.
No functional changes.
- add support for volumes above 2TiB with Promise metadata format;
- enforse and document other limitations:
- Intel and Promise metadata formats do not support disks above 2TiB;
- NVIDIA metadata format does not support volumes above 2TiB.
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
The origin of GENCOMM seems to come from Alteon Tigon Host/NIC
interface definition where it defines general communications region
which is active when firmware is loaded and running. This region
was used in communication between the host and processor internal
to the Tigon chip.
Broadcom data sheet also defines the region as 'Software Gencomm'
in NetXtreme memory map but lacks detailed description of its
interface so it was hard to know which ones are used for which
interface.
This change shall slightly enhance readability.
No functional changes.
