freebsd-skq

History

imp 19d21d2414 After some intial testing, there are even slower cards than the ones

that I have.  Wait up to 1.1s for the card to become ready.  Document
what the standards say, and use that to justify the behavior in the
code: PCI standard says that a card must respond to configuration
cycles within 2^25 cycles after reset goes high, which is
approximately 1s.  Therefore, give cards a little break and wait for
up to 1.1s for VENDOR to become valid.  Only look at the vendor part
of the ID, since only it can't be 0xffff (although in practice
vendor/device will always be != 0xfffffffff).  Include detailed
pointers to standards so epople understand why we're doing what we're
doing and why it just might be OK.  Make it clear in the timeout
message that it is just a warning, sinc we try to soldier on as best
we can anyway.

This should eliminate an error message that r181453 produced on
certain Atheros cards.

2008-08-09 07:41:18 +00:00

aac

Add explicit PCI IDs for the following Adaptec RAID Series 2 adapters:

2008-06-27 19:34:47 +00:00

acpi_support

Fix my previous commit. We actually should pass evaluation args in

2008-07-04 23:40:53 +00:00

acpica

Fix a typo.

2008-08-04 19:45:15 +00:00

adlink

Set D_NEEDGIANT.

2007-08-04 17:43:11 +00:00

advansys

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

age

Use DELAY() instead of pause if waiting time is less than 1ms.

2008-07-18 01:00:54 +00:00

agp

Enable the support for G33/Q35/Q33 now that both the G33 and Q35 have been

2008-08-01 13:11:23 +00:00

aha

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

ahb

Fix a compile error from the last change.

2007-06-17 15:21:09 +00:00

aic

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

aic7xxx

Only print sense data diagnostics if debugging is enabled with the

2008-02-17 16:00:36 +00:00

amd

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

amr

While spin-waiting for the mailbox semaphore to update, do flushing reads of

2008-07-20 16:50:14 +00:00

Style changes from avatar.

2008-01-18 16:34:18 +00:00

Don't call bus_deactivate_resource() explicitly before calling

2007-03-21 03:38:37 +00:00

arcmsr

Fix an incorrect FreeBSD version test.

2007-12-09 19:24:27 +00:00

asmc

Match the Mac Pro with 8 cores. This machine reports 35 temperature

2008-04-12 12:04:09 +00:00

asr

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

ata

Detect ATA controllers in the Macbook3.

2008-07-10 21:36:53 +00:00

ath

Change the calling convention for ic_node_alloc to deal with

2008-06-07 18:38:02 +00:00

atkbdc

Fill in sysctl descriptions.

2008-07-26 00:01:19 +00:00

auxio

…

bce

- Added support for BCM5709 and BCM5716 controllers.

2008-06-13 01:16:37 +00:00

bfe

style(9) - space after keywords, don't indent case.

2008-07-29 09:02:00 +00:00

bge

Improve the integration of BCM5906[M] support:

2008-05-14 21:00:27 +00:00

bktr

Add locking to the various iicbus(4) bridge drivers:

2008-08-04 20:46:15 +00:00

Fix some locking and logic bugs pointed out by jhb. These fix driver detach and speed up data transfer by nearly a factor of 2.

2008-07-03 21:51:30 +00:00

buslogic

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

cardbus

Make the PCI code aware of PCI domains (aka PCI segments) so we can

2007-09-30 11:05:18 +00:00

Fix instances of bogus #elsif directive.

2008-07-01 14:41:03 +00:00

ciss

Correctly set the interrupt enable and disable bits. The previous

2008-08-02 13:04:26 +00:00

Spelling fix for interupt -> interrupt

2007-10-12 06:03:46 +00:00

cmx

Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers.

2008-03-06 08:09:45 +00:00

coretemp

style(9): remove FreeBSD CVS ID from the initial license comment.

2008-05-14 10:02:25 +00:00

Do not set IFF_DEBUG directly from the driver.

2008-06-30 21:18:27 +00:00

cpuctl

- Add cpuctl(4) pseudo-device driver to provide access to some low-level

2008-08-08 16:26:53 +00:00

cpufreq

Probe CPUs after the PCI hierarchy on i386, amd64, and ia64. This allows

2008-03-10 22:18:07 +00:00

Improve the EEPROM parsing, based on finding a datasheet that describes

2008-07-09 16:47:55 +00:00

…

ctau

Do not set IFF_DEBUG directly from the driver.

2008-06-30 21:18:27 +00:00

Do not set IFF_DEBUG directly from the driver.

2008-06-30 21:18:27 +00:00

cxgb

remove socketvar.h, add more selective includes

2008-07-31 20:28:58 +00:00

…

Ethernet hardware address stored in DC_AL_PAR0/DC_AL_PAR1 register

2008-06-08 02:52:26 +00:00

dcons

Spell KDB_REQ_REBOOT correctly.

2008-05-05 08:25:46 +00:00

During attach on some de(4) adapters the driver sends out a test packet as

2008-04-05 17:24:44 +00:00

digi

…

dpt

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

drm

Add the i915 GME device to DRM.

2008-03-21 16:38:42 +00:00

e1000

Data type fix

2008-07-31 02:22:53 +00:00

When the miibus for the AX88x90 or TC5299J cards fails to attach, we

2008-08-06 22:22:27 +00:00

eisa

…

Replaced the misleading uses of a historical artefact M_TRYWAIT with M_WAIT.

2008-03-25 09:39:02 +00:00

…

esp

o Fix style(9) bugs and similar nits.

2008-07-22 13:51:21 +00:00

Don't leak DMA map if not freed.

2008-07-11 18:26:12 +00:00

Make ex(4) MPSAFE:

2008-06-13 12:14:22 +00:00

exca

- Fix exca_(io|mem)_map() to return proper errno values.

2007-03-23 17:15:07 +00:00

fatm

Replaced the misleading uses of a historical artefact M_TRYWAIT with M_WAIT.

2008-03-25 09:39:02 +00:00

Convert amd64 and i386 to share the atrtc device driver.

2008-04-14 08:00:00 +00:00

fdc

The wakeup() line from the rev. 1.319 is wrong and reintroduces

2008-01-11 16:50:52 +00:00

- Use bus_foo() rather than bus_space_foo() and retire the bus tag and handle

2008-06-23 18:16:25 +00:00

firewire

- Fix panic on detach.

2008-05-10 13:40:42 +00:00

flash

Rename the kthread_xxx (e.g. kthread_create()) calls

2007-10-20 23:23:23 +00:00

fxp

Reuse the mbuf that was just retrieved from the receive ring if mbuf

2008-03-22 18:13:39 +00:00

gem

o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite

2008-06-22 13:54:51 +00:00

hatm

Give MEXTADD() another argument to make both void pointers to the

2008-02-01 19:36:27 +00:00

hifn

Overhaul driver/subsystem api's:

2007-03-21 03:42:51 +00:00

hme

- Use the revamped code from the gem(4) PCI front-end, which

2008-04-26 14:17:21 +00:00

hptiop

Update the hptiop driver to version 1.3. This adds support for the 4xxx

2008-02-03 16:07:12 +00:00

hptmv

Rename the kthread_xxx (e.g. kthread_create()) calls

2007-10-20 23:23:23 +00:00

hptrr

Fix a mistake made during the import of the driver. Previous versions of

2008-03-08 18:06:48 +00:00

hwpmc

- Provide kernelname as the name for process with P_KTHREAD set as

2008-07-25 05:49:48 +00:00

Support for Freescale QUad Integrated Communications Controller.

2008-03-03 18:20:17 +00:00

ichsmb

- Use bus_foo() rather than bus_space_foo() and remove bus space tag/handle

2008-06-06 18:29:56 +00:00

ichwd

Add support for ICH8M.

2008-01-07 09:46:39 +00:00

ida

…

Use the new bus device_shutdown hook for performing the shutdown action

2008-08-01 21:33:07 +00:00

ieee488

Remove the distinction between device minor and unit numbers.

2008-05-29 12:50:46 +00:00

if_ndis

Fix a mutex LOR introduced by the conversion of if_ndis from spinlocks to

2008-07-09 00:10:55 +00:00

iicbus

- Reflect the iicbus infrastructure changes.

2008-08-05 08:38:33 +00:00

iir

Fix a buffer overflow in the processing of various SCSI commands. This likely

2008-01-09 20:02:56 +00:00

Remove D_NEEDGIANT from io(4).

2008-08-08 13:43:56 +00:00

ipmi

Rename the kthread_xxx (e.g. kthread_create()) calls

2007-10-20 23:23:23 +00:00

ips

…

ipw

Minor cleanup of vap create work:

2008-05-12 00:15:30 +00:00

iscsi/initiator

Record the dependency of the iscsi initiator on cam.

2008-04-20 15:56:59 +00:00

isp

Add missing locking for SBus controllers.

2007-11-05 11:22:18 +00:00

ispfw

…

iwi

Change the calling convention for ic_node_alloc to deal with

2008-06-07 18:38:02 +00:00

iwn

Change the calling convention for ic_node_alloc to deal with

2008-06-07 18:38:02 +00:00

ixgb

…

ixgbe

This updates the ixgbe driver to Intel internal version 1.4.7

2008-07-30 18:15:18 +00:00

jme

Fix buffer discard index.

2008-07-28 02:37:15 +00:00

joy

…

k8temp

Fix comment: s/before/after.

2008-07-06 16:18:58 +00:00

kbd

Don't include <sys/tty.h> in non-TTY drivers.

2008-07-24 09:54:10 +00:00

kbdmux

Don't include <sys/tty.h> in non-TTY drivers.

2008-07-24 09:54:10 +00:00

Correct the comments in am7990_intr() and am79900_intr(); it's not

2007-12-30 00:23:38 +00:00

led

Remove the distinction between device minor and unit numbers.

2008-05-29 12:50:46 +00:00

lge

Plug memory leak in jumbo buffer allocation failure path.

2008-03-05 05:36:09 +00:00

lmc

Rename several functions in if_lmc with potential name collisions with

2008-07-05 16:39:24 +00:00

malo

Minor cleanup of vap create work:

2008-05-12 00:15:30 +00:00

mc146818

Export mc146818_def_{read,write}() so the front-end can make use

2007-06-16 23:10:00 +00:00

mca

…

mcd

…

Remove the distinction between device minor and unit numbers.

2008-05-29 12:50:46 +00:00

mem

…

mfi

Tweak the output of event log messages from the controller:

2008-06-26 22:36:38 +00:00

mii

Fix a copy/paste error

2008-08-06 07:52:59 +00:00

mk48txx

Revisit the watchdogs: Resetting the error to EINVAL after failing to set the

2007-03-27 21:03:37 +00:00

mlx

…

mly

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

mmc

Rename the kthread_xxx (e.g. kthread_create()) calls

2007-10-20 23:23:23 +00:00

mpt

Allocate a single CCB at the start of the main loop of the RAID monitoring

2008-07-21 18:43:02 +00:00

mse

…

msk

Move comments block 1 line up to remark on the setting

2008-03-11 02:39:52 +00:00

mxge

Clean up mxge's use of callouts as pointed out by jhb,

2008-07-17 15:46:35 +00:00

Spelling fix for interupt -> interrupt

2007-10-12 06:03:46 +00:00

ncv

…

nfe

Add support for MCP73 chips.

2008-04-10 01:25:09 +00:00

nge

Fix function prototype for device_shutdown method.

2007-11-22 02:45:00 +00:00

nmdm

Don't enforce unique device minor number policy anymore.

2008-06-11 18:55:19 +00:00

nsp

…

null

…

nve

Import rewritten nve device id's, which brings this more

2008-05-31 14:17:36 +00:00

nvram

- Use an sx lock to serialize writes since they update the checksum.

2008-08-01 20:39:18 +00:00

nxge

Merge Neterion if_nxge driver version 2.0.9.11230 with the following

2007-10-29 14:19:32 +00:00

ofw

Expand kdb_alt_break a little, most commonly used with the option

2008-05-04 23:29:38 +00:00

patm

Give MEXTADD() another argument to make both void pointers to the

2008-02-01 19:36:27 +00:00

pbio

…

pccard

Fix a small problem in the comment about departure from NetBSD.

2008-08-07 21:16:14 +00:00

pccbb

After some intial testing, there are even slower cards than the ones

2008-08-09 07:41:18 +00:00

pcf

- Consolidate module version for the pcf module into just pcf.c instead

2008-08-05 17:39:37 +00:00

pci

Change -1 to 0xfffffffful since the interface returns uint32_t.

2008-08-09 03:54:12 +00:00

pdq

Fix preprocessor code to check for a symbol being defined prior to checking

2007-06-08 01:49:04 +00:00

powermac_nvram

Redefine bus_space_tag_t on PowerPC from a 32-bit integral to

2007-12-19 18:00:50 +00:00

ppbus

Add locking to the various iicbus(4) bridge drivers:

2008-08-04 20:46:15 +00:00

ppc

Don't call bus_deactivate_resource() explicitly before calling

2007-03-21 03:38:37 +00:00

pst

…

puc

The SIIG 4 port serial card based on the Oxford OX16PCI954 is

2008-05-29 07:15:52 +00:00

quicc

Support for Freescale QUad Integrated Communications Controller.

2008-03-03 18:20:17 +00:00

ral

Change the calling convention for ic_node_alloc to deal with

2008-06-07 18:38:02 +00:00

random

Correct a random value disclosure in random(4).

2007-11-29 16:06:12 +00:00

ray

add defs just removed from ieee80211.h

2007-09-05 21:25:58 +00:00

…

Rearrange conditional compilation directives. This makes syntax

2008-08-04 04:00:10 +00:00

rndtest

…

Initialize DWBuf[3].

2007-07-05 06:51:49 +00:00

safe

bandaid crash as I have no time to research the issue and the driver

2007-11-03 19:10:14 +00:00

scc

With rev 1.24 of sys/powerpc/powermac/macio.c, we now get a

2008-04-26 18:40:59 +00:00

scd

…

Fix build.

2008-01-21 09:51:28 +00:00

Remove sicontrol(8)'s "ttystat".

2008-06-09 08:43:27 +00:00

sio

Expand kdb_alt_break a little, most commonly used with the option

2008-05-04 23:29:38 +00:00

Prefer NULL over integer 0 for pointer type.

2008-02-14 01:25:01 +00:00

smbus

- Store the device_t of the smbX device in the softc.

2008-06-06 18:45:32 +00:00

smc

- Move ether_ifdetach earlier.

2008-06-17 05:48:42 +00:00

…

snc

Convert to new style PC Card front end driver. Add support for the

2008-08-07 20:55:20 +00:00

snp

Don't enforce unique device minor number policy anymore.

2008-06-11 18:55:19 +00:00

sound

Add quirk for Dell D630 laptops.

2008-07-15 02:34:44 +00:00

speaker

Move speaker a lot closer to style(9)

2008-05-15 01:22:48 +00:00

spibus

…

Don't call bus_deactivate_resource() explicitly before calling

2007-03-21 03:38:37 +00:00

stg

…

stge

Use m_collapse(9) to collapse mbuf chains instead of relying on

2008-01-18 08:32:08 +00:00

streams

Make ftruncate a 'struct file' operation rather than a vnode operation.

2008-01-07 20:05:19 +00:00

sym

Allow 53C1010 without NVRAM to negotiate Ultra-3.

2008-08-07 23:41:17 +00:00

syscons

Lower the priority of the sleep in the syscons for "waitvt" wchan to

2008-08-04 12:22:33 +00:00

tdfx

Add the module dependency on the mem(4) module. This will fix the module

2008-03-13 14:08:41 +00:00

Remove some remnant alpha hacks.

2008-04-26 14:13:48 +00:00

trm

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

tsec

Convert TSEC watchdog to the new scheme.

2008-03-12 16:35:25 +00:00

twa

Deferred interrupts don't work yet, disable them.

2007-10-12 16:51:22 +00:00

twe

Add missing \n.

2008-02-12 08:58:26 +00:00

Make tx(4) MPSAFE

2008-06-10 17:59:43 +00:00

txp

Read MII_ANAR register and get common denominator ability.

2007-11-16 10:32:10 +00:00

uart

The XScale PXA255 has three generally ns16x50 compatible UARTs. One of the

2008-05-30 01:57:13 +00:00

ubsec

Overhaul driver/subsystem api's:

2007-03-21 03:42:51 +00:00

usb

Add support for the ASUS P535 PDA

2008-08-02 12:15:18 +00:00

utopia

Fix a use-after-free.

2007-12-05 19:32:59 +00:00

vge

Fix function prototype for device_shutdown method.

2007-11-22 02:45:00 +00:00

vkbd

Don't enforce unique device minor number policy anymore.

2008-06-11 18:55:19 +00:00

Fix a multicast handling regression on VT6105M introduced in

2008-07-16 08:35:29 +00:00

- vx_stop() requires the driver lock to be held.

2008-04-24 22:51:43 +00:00

watchdog

Revisit the watchdogs: Resetting the error to EINVAL after failing to set the

2007-03-27 21:03:37 +00:00

wds

Prepare for future integration between CAM and newbus. xpt_bus_register

2007-06-17 05:55:54 +00:00

Add an altnerative Siemens SpeedStream ID. This one is for a Prism 3

2008-08-02 20:50:13 +00:00

Don't call bus_deactivate_resource() explicitly before calling

2007-03-21 03:38:37 +00:00

wpi

- Fix compile if WPI_DEBUG is not defined

2008-06-23 15:40:56 +00:00

Style(9) xe(4). The MD5 sums are different, but comparing the dissassemblies

2008-06-04 20:26:57 +00:00