imp efe72c3bf7 Carefully note the RMII bit in the config register at attach time. ...

The boot loader is supposed to leave this bit set to the right value
for the board.  If this bit was set at attach time, use it to init the
config register correctly.

Note: this means the boot loader has to properly initialize it.

2006-06-17 23:24:35 +00:00

..

at91_pdcreg.h

Get this to compile :

2006-05-11 14:30:28 +00:00

at91_pio.c

Skeleton PIO support.

2006-03-24 07:39:29 +00:00

at91_pioreg.h

Skeleton PIO support.

2006-03-24 07:39:29 +00:00

at91_pmc.c

improve reporting of clocks

2006-06-17 23:22:10 +00:00

at91_pmcreg.h

Add the sekelton of support for the Power Management Controller.

2006-03-24 07:37:56 +00:00

at91_pmcvar.h

Add the sekelton of support for the Power Management Controller.

2006-03-24 07:37:56 +00:00

at91_rtc.c

Add RTC support. This may be of dubious value since the RTC is reset

2006-03-24 07:35:30 +00:00

at91_rtcreg.h

Add RTC support. This may be of dubious value since the RTC is reset

2006-03-24 07:35:30 +00:00

at91_spi.c

…

at91_spiio.h

…

at91_spireg.h

…

at91_ssc.c

Skeleton support for the SSC device, which implements I2S interfaces,

2006-03-24 07:42:33 +00:00

at91_sscreg.h

Skeleton support for the SSC device, which implements I2S interfaces,

2006-03-24 07:42:33 +00:00

at91_st.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

at91_streg.h

…

at91_twi.c

Connect twi to the FreeBSD iicbus infrastructure.

2006-04-06 04:31:19 +00:00

at91_twiio.h

…

at91_twireg.h

…

at91_usartreg.h

Remove unused bit definitions.

2006-04-06 04:29:24 +00:00

at91.c

We have an implementation of generic_bs_rr_1, so use it, as some drivers use

2006-05-19 11:27:02 +00:00

at91rm92reg.h

MFP4:

2006-03-18 01:38:25 +00:00

at91var.h

…

files.at91

Add rtc to files.at91

2006-03-24 07:36:23 +00:00

files.kb920x

…

hints.at91rm9200

…

hints.at91sam9261

…

if_ate.c

Carefully note the RMII bit in the config register at attach time.

2006-06-17 23:24:35 +00:00

if_atereg.h

…

kb920x_machdep.c

MFp4: Increase the L1 pagetable needed for the kernel from 8 to 22, to be

2006-06-12 22:57:24 +00:00

ohci_atmelarm.c

MFp4:

2006-03-18 01:45:29 +00:00

std.at91

These files apply to all the atmel parts that freebsd is going to run on,

2006-02-17 22:33:13 +00:00

std.kb920x

These files apply to all the atmel parts that freebsd is going to run on,

2006-02-17 22:33:13 +00:00

uart_bus_at91usart.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

uart_cpu_at91rm9200usart.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

uart_dev_at91usart.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00