Warner Losh 9107643c54 Before resetting the USART, delay a bit to allow the transmitter to ... finish the current character to drain to avoid glitching. Also, simplify the code a smidge.		2014-01-26 04:57:58 +00:00
..
at91_aicreg.h
at91_cfata.c
at91_gpio.h	Provide a simplified way to specify GPIO pins for the Atmel port.	2014-01-15 19:49:12 +00:00
at91_machdep.c	Although not strictly required to boot a 64MB board, bump	2013-12-06 18:41:16 +00:00
at91_mci.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_mcireg.h	- Add support for MCI1 revision 2xx controllers and a work-around for their	2012-04-22 00:43:32 +00:00
at91_pdcreg.h
at91_pio_sam9g20.h
at91_pio_sam9g45.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91_pio.c	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pioreg.h	Add definitions for the additional PIO pins found on recent AT91 SoCs.	2013-12-02 02:33:03 +00:00
at91_piovar.h	Fix regression issue after r248910.	2013-04-07 13:03:57 +00:00
at91_pit.c	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pitreg.h	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pmc.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
at91_pmcreg.h	Add charge pump current register.	2012-08-10 04:47:20 +00:00
at91_pmcvar.h	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91_reset.S	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91_rst.c	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rstreg.h	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rtc.c	Loop reading the RTC registers until the same values are obtained	2012-10-07 20:36:46 +00:00
at91_rtcreg.h	Use the RTC unit to get the time. This works on all known AT91SAM9*	2012-10-07 01:58:32 +00:00
at91_smc.c	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
at91_smc.h	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
at91_spi.c	Fetch the chip select in the bridge driver, like all the other spi	2012-08-23 22:38:37 +00:00
at91_spireg.h	- Prepend the device description with "AT91" to reflect its nature. [1]	2012-06-03 00:54:10 +00:00
at91_ssc.c	Strip trailing whitespace before other changes.	2012-06-13 04:52:19 +00:00
at91_sscreg.h
at91_st.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_streg.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_twi.c	Fix a stray debug that I committed accidentally years ago...	2012-06-22 06:44:22 +00:00
at91_twiio.h
at91_twireg.h	Add support for the Atmel SAM9XE familiy of microcontrollers, which	2012-04-14 17:09:38 +00:00
at91_usartreg.h
at91_wdt.c	Add support for the Atmel SAM9XE familiy of microcontrollers, which	2012-04-14 17:09:38 +00:00
at91_wdtreg.h	Strip trailing whitespace before other changes.	2012-06-13 04:52:19 +00:00
at91.c	Bus space handles need to be the VA of the requested resource, not the	2014-01-25 21:52:19 +00:00
at91board.h	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
at91reg.h	The system IRQ is always IRQ 1. Make it so.	2012-07-10 02:39:03 +00:00
at91rm92reg.h	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91rm9200_devices.c	Fix a typo: the RXD0 pin is PA18, not PA19.	2013-03-29 18:06:54 +00:00
at91rm9200.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91rm9200var.h	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
at91sam9g20.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9g20reg.h	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91sam9g45.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9g45reg.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91sam9x5.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9x5reg.h	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
at91sam9260.c	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
at91sam9260reg.h	Missed one of the special AT91SAM9xxx_BASE defines. This should be	2012-07-10 02:44:15 +00:00
at91soc.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91soc.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91var.h	Add data so we can convert a PIO unit number into a base address.	2014-01-15 19:53:36 +00:00
board_bwct.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_eb9200.c	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
board_ethernut5.c	uboot should be telling us it is an ETHERNUT5 for this board. Tag it	2012-07-14 06:00:37 +00:00
board_hl200.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_hl201.c	Connect NAND for the SAM9260EK eval board, as well as the HotE HL-201.	2014-01-19 17:59:34 +00:00
board_kb920x.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_qila9g20.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9g20ek.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9x25ek.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9260ek.c	Fix gcc with -Wstrict-prototypes by telling it bi_emac takes no parameters.	2014-01-25 19:36:27 +00:00
board_sn9g45.c	Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.	2012-07-27 16:38:02 +00:00
board_tsc4370.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
files.at91	Add standard memory controller helper functions.	2014-01-19 17:45:13 +00:00
if_ate.c	Loose -> Lose so this sentence makes sense.	2013-12-11 15:32:28 +00:00
if_atereg.h
if_macb.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
if_macbreg.h
if_macbvar.h	Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this	2013-11-30 22:17:27 +00:00
std.at91	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9g45	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.atmel	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.bwct
std.eb9200	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
std.ethernut5	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.hl200	Compute the master clock frequency, so we no longer need to have it	2012-05-29 03:23:18 +00:00
std.hl201	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.kb920x	Compute the master clock frequency, so we no longer need to have it	2012-05-29 03:23:18 +00:00
std.qila9g20	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.sam9g20ek	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.sam9x25ek	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
std.sam9260ek	Add preliminary support for Atmel SAM9260-EK evaluation kit.	2012-07-14 06:13:23 +00:00
std.sn9g45	Add support for the DesignA Electronics Snapper9g45 System on Module.	2012-07-26 08:05:28 +00:00
std.tsc4370
uart_bus_at91usart.c	Remove redundant declaration for uart devclass.	2014-01-24 16:50:15 +00:00
uart_cpu_at91usart.c	Remove redundant declaration for uart devclass.	2014-01-24 16:50:15 +00:00
uart_dev_at91usart.c	Before resetting the USART, delay a bit to allow the transmitter to	2014-01-26 04:57:58 +00:00