..
aac
Previously, the aac driver did not handle enclosure management AIFs,
2010-09-29 14:22:00 +00:00
acpi_support
Remove an unnecessary hack from ACPICA 20100915 (r212761).
2010-09-16 20:11:40 +00:00
acpica
Adjust a comment to clarify why \_SB_ and \_TZ_ are defined as device type
2010-11-03 23:16:35 +00:00
adb
Add support for interpreting taps on ADB touchpads as a button click.
2009-11-28 17:48:25 +00:00
adlink
Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
2009-12-29 21:51:28 +00:00
advansys
ae
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
age
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
agp
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC
2010-10-31 18:27:05 +00:00
aha
ahb
ahci
Add missing mtx_destroy() on channel attach failure.
2010-10-25 07:41:21 +00:00
aic
aic7xxx
Revert r213765. This is required because our build infrastructure uses
2010-10-14 19:19:19 +00:00
alc
Don't bother to enable ASPM L1 to save more power. Even though I am
2010-10-30 01:12:54 +00:00
ale
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
amd
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
amdsbwd
amdsbwd: fix nonsensical timeout calculations
2010-05-31 09:07:23 +00:00
amdtemp
Restore (undocumented) support for early revisions and add more comments.
2009-09-14 23:08:19 +00:00
amr
Fix clang warning on empty statement.
2010-07-28 16:24:11 +00:00
an
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
arcmsr
Apply vendor version 1.20.00.17.
2010-07-21 18:50:24 +00:00
asmc
Use %zu for size_t.
2009-09-14 21:33:00 +00:00
asr
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
ata
Remove stale line, accidentally slipped into r214016.
2010-11-02 09:31:24 +00:00
ath
Fix indenting/whitespace issues introduced by me.
2010-08-15 11:40:53 +00:00
atkbdc
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
auxio
Enroll these drivers in multipass probing. The motivation behind this
2009-12-22 21:02:46 +00:00
bce
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
bfe
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
bge
Add initial BCM5718 family support. The BCM5718 family includes
2010-10-27 17:20:19 +00:00
bktr
Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc).
2010-07-13 19:27:20 +00:00
bm
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
buslogic
bwi
Introduce IEEE80211_C_RATECTL, drivers which use the ratectl framework
2010-08-14 20:12:10 +00:00
bwn
Small grammar nit in a printf message.
2010-10-12 11:05:32 +00:00
cardbus
Move the PCI-specific logic of removing a cardbus device into a
2010-01-05 20:42:25 +00:00
cas
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
ce
Revert r213793.
2010-10-13 17:38:23 +00:00
cfe
Start using the 'init_static_kenv()' API provided by r198561 to initialize
2010-08-11 02:13:50 +00:00
cfi
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ciss
Cosmetic: make it less confusing when displaying RAID 1 level, that might
2010-10-02 08:18:19 +00:00
cm
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cmx
coretemp
Catch known CPUs before using IA32_TEMPERATURE_TARGET.
2010-08-04 00:25:13 +00:00
cp
Revert r213793.
2010-10-13 17:38:23 +00:00
cpuctl
cpufreq
cs
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ct
Spell "Hz" correctly wherever it is user-visible.
2010-01-12 17:59:58 +00:00
ctau
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cxgb
Re-add r212370 now that the LOR in powerpc64 has been resolved:
2010-09-16 16:13:12 +00:00
cy
dc
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 23:34:31 +00:00
dcons
de
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
digi
dpms
Attach dpms(4) to vgapm and make sure to restore DPMS state after
2009-12-15 19:58:23 +00:00
dpt
Get rid of #ident, GCC 4.4 warns about it being deprecated.
2010-01-08 17:20:41 +00:00
drm
Add support for ATI Radeon HD 4250.
2010-08-03 16:30:56 +00:00
e1000
Sync the lem code up with the vlan and other fixes in em.
2010-11-01 20:19:25 +00:00
ed
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
eisa
en
ep
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
esp
Include <machine/ofw_machdep.h> for OF_getscsinitid().
2010-05-10 20:02:39 +00:00
et
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
ex
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
exca
CardBus instead of cardbus.
2010-01-03 23:26:29 +00:00
fatm
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
fb
Fix segment:offset calculation of interrupt vector for relocated video BIOS
2010-09-13 19:58:46 +00:00
fdc
Fix a regression from r200554, which broke fdc(4) attachment to acpi(4).
2010-05-30 03:45:41 +00:00
fdt
Eliminate FDT_IMMR_VA define.
2010-07-19 18:47:18 +00:00
fe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
firewire
Fix grammar.
2010-10-18 14:26:29 +00:00
flash
Add s25sl064a, an 8mb SPI flash part.
2010-08-17 16:27:13 +00:00
fxp
Add TSO support over VLAN for i82550/i82551. Controller requires
2010-10-24 21:59:51 +00:00
gem
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
glxsb
gpio
Fix legal staff in GPIO sources:
2010-09-29 20:53:33 +00:00
hatm
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
hifn
- Do not place variables to memory allocated by busdma. pre/post ops
2010-09-24 04:46:46 +00:00
hme
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
hptiop
Report transport type in XPT_PATH_INQ.
2010-06-19 13:41:17 +00:00
hptmv
Report transport type in XPT_PATH_INQ.
2010-06-19 13:42:14 +00:00
hptrr
Pass a format string to make_dev().
2010-10-13 14:41:52 +00:00
hwpmc
Fix two aliases that had the same name but were pointing to different
2010-10-04 17:22:18 +00:00
ic
Merge from projects/mips to head by hand:
2010-01-11 04:13:06 +00:00
ichsmb
Add support for Intel Cougar Point SMBus controller.
2010-08-27 23:24:08 +00:00
ichwd
Add Intel Cougar Point PCH LPC Controller Device IDs
2010-08-28 00:09:46 +00:00
ida
ie
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ieee488
GPIB overhaul, part #2 : make the tnt4882 driver work with the newer
2010-02-01 21:21:10 +00:00
if_ndis
There is no reason to call rt_ifmsg(), remove it.
2010-10-19 19:11:36 +00:00
iicbus
Add three new drivers for fan control and temperature reading on the
2010-10-15 20:08:16 +00:00
iir
Get rid of #ident.
2010-01-08 20:40:28 +00:00
io
- Extract the IODEV_PIO interface from ia64 and make it MI.
2010-04-28 15:38:01 +00:00
ipmi
Fix test for double-nul characters that terminate the string table at
2010-07-29 13:46:37 +00:00
ips
Fix argument order in a call to mtx_init.
2009-12-17 00:21:12 +00:00
ipw
Enable 5.5 and 11Mbit TX rates.
2010-05-11 17:14:17 +00:00
iscsi /initiator
Remove the freelist, which simply duplicates some of the zone allocator's
2010-09-02 14:13:43 +00:00
isp
Don't pass a buffer directly as a printflike format string.
2010-06-10 19:38:07 +00:00
ispfw
Don't spam dmesg with "registered firmware ..." when module is compiled
2010-03-05 03:37:42 +00:00
iwi
The firmware does pad notifications to an even number of bytes (at least
2010-10-23 11:26:22 +00:00
iwn
Fix typo in previous commit.
2010-09-19 12:52:23 +00:00
ixgb
Do not allocate multicast array memory in multicast filter
2010-08-28 00:34:22 +00:00
ixgbe
Do not allocate multicast array memory in multicast filter
2010-08-28 00:34:22 +00:00
jme
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
joy
kbd
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
kbdmux
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
ksyms
Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
2009-12-29 21:51:28 +00:00
le
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
led
Fix an incorrect use of sbuf_overflowed() after a call to sbuf_finish().
2010-09-09 18:35:08 +00:00
lge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
lindev
lindev(4) [1] is supposed to be a collection of linux-specific pseudo
2009-09-26 12:45:28 +00:00
lmc
One more #ifdef fix for GCC 4.4.
2010-01-08 15:57:56 +00:00
malo
Fix firmware module dependencies.
2010-09-10 08:11:48 +00:00
mc146818
Remove clause 3 from Izumi Tsutsui's licenses.
2009-12-25 22:58:43 +00:00
mca
mcd
md
Allow the MDIOCATTACH ioctl operation to originate from within the kernel.
2010-10-18 04:26:32 +00:00
mem
mfi
Update PD state firmware definitions: add copyback, system.
2010-10-21 10:38:52 +00:00
mge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
mii
Turn a panic into a printf so IFM_ETH_MASTER on !IFM_1000_T is complained
2010-10-31 22:59:49 +00:00
mk48txx
Fix botches in r201005:
2010-01-01 22:47:53 +00:00
mlx
Temporarily revert the new-bus locking for 8.0 release. It will be
2009-08-20 19:17:53 +00:00
mly
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
mmc
Report relative card address to NewBus as location string.
2010-05-23 09:44:48 +00:00
mn
mps
Currently only opt_compat.h is included by the mps(4) driver. Also
2010-10-15 15:24:59 +00:00
mpt
Take mpt_req_on_{free,pending}_list() out from under INVARIANTS as these
2010-09-24 23:54:03 +00:00
mse
msk
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
mvs
Workaround strange situation when EDMA_RESQIP register returns zero instead
2010-10-20 07:47:31 +00:00
mwl
Fix firmware module dependencies.
2010-09-10 08:11:48 +00:00
mxge
Add interrupt descriptions for mxge's msi-x vectors
2010-05-21 15:57:24 +00:00
my
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ncv
nfe
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nmdm
nsp
null
Mark /dev/zero and /dev/null as eternal.
2010-08-06 09:47:48 +00:00
nve
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nvram
nxge
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ofw
Change OF_interpret() to also take an array of cell_t (missed in r209801).
2010-09-11 18:55:00 +00:00
patm
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
pbio
pccard
cardbus -> CardBus
2010-01-03 23:31:58 +00:00
pccbb
Temporarily revert the new-bus locking for 8.0 release. It will be
2009-08-20 19:17:53 +00:00
pcf
pci
The EHCI_CAPLENGTH and EHCI_HCIVERSION registers are actually sub-registers
2010-10-25 15:51:43 +00:00
pcn
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
pdq
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
powermac_nvram
Add support for the Sharp/Micron flash chips to powermac_mvram(4).
2010-09-05 20:04:02 +00:00
ppbus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ppc
Add PCI ID for MCS9901's parallel port.
2010-03-23 20:08:18 +00:00
pst
Temporarily revert the new-bus locking for 8.0 release. It will be
2009-08-20 19:17:53 +00:00
pty
Move ptmx into pty(4).
2009-09-06 10:27:45 +00:00
puc
Add support for the Perle Speed4 LE.
2010-05-20 13:16:42 +00:00
quicc
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ral
If rt2560_bbp_init() fails, don't drop the lock as the callers of
2010-09-29 11:52:44 +00:00
random
Use the fpu_kern_enter() interface to properly separate usermode FPU
2010-06-05 16:00:53 +00:00
rc
re
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
rndtest
rp
These checks against BUSY aren't needed: the newbus layer does this
2009-09-05 08:38:25 +00:00
safe
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
sbni
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
scc
scd
sdhci
sec
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
sf
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
si
siba
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
siis
Add missing mtx_destroy() on channel attach failure.
2010-10-25 07:41:21 +00:00
sio
sis
Correct handling of shared interrupt in sis_intr(). r212116 incorrectly
2010-10-20 00:19:25 +00:00
sk
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
smbus
smc
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sn
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snp
Add ttydisc_rint_simple().
2009-08-23 08:04:40 +00:00
sound
Make hw.snd.vpc_0db to be also a loader tunable.
2010-10-25 08:25:44 +00:00
speaker
spibus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ste
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
stg
stge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
streams
sym
- On sparc64 obtain the initiator ID from the Open Firmware device tree
2010-04-27 18:05:33 +00:00
syscons
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
tdfx
Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
2009-12-29 21:51:28 +00:00
ti
Neither the page lock nor the page queues lock is required to unwire and
2010-05-03 15:51:59 +00:00
tl
- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective
2010-10-24 12:51:02 +00:00
tpm
Add tpm(4) driver for Trusted Platform Module.
2010-08-12 00:16:18 +00:00
trm
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
tsec
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
twa
Fix a compile problem introduced with r212008 on 32bit:
2010-09-04 16:27:14 +00:00
twe
Teach twe driver to report array stripe size to GEOM.
2009-12-25 17:34:43 +00:00
tx
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
txp
Make sure rx descriptor ring align on 16 bytes. I guess the
2009-08-31 22:09:48 +00:00
uart
Eliminate FDT_IMMR_VA define.
2010-07-19 18:47:18 +00:00
ubsec
Cast the bus_size_t to a intmax_t rather than assuming type-punning to
2010-03-29 17:26:24 +00:00
usb
- Remove an unused entry from the softc (only used in a debugging printf).
2010-11-05 09:06:23 +00:00
utopia
vge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vkbd
vr
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
watchdog
wb
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
wds
wi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wpi
Introduce IEEE80211_C_RATECTL, drivers which use the ratectl framework
2010-08-14 20:12:10 +00:00
xe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xen
sys/dev/xen/blkback/blkback.c:
2010-10-28 04:14:28 +00:00
xl
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00