Bjoern A. Zeeb e6b802649c Remove keyboard entropy [1] from r270105. ...

Reported by:		ian [1]
(Pointy hat)^2 to:	imp

2014-08-17 18:27:02 +00:00

..

at91_aic.c

Add support for multipass to Atmel, for both FDT and !FDT cases.

2014-08-14 04:21:25 +00:00

at91_aicreg.h

…

at91_cfata.c

…

at91_common.c

Remove keyboard entropy [1] from r270105.

2014-08-17 18:27:02 +00:00

at91_gpio.h

Provide a simplified way to specify GPIO pins for the Atmel port.

2014-01-15 19:49:12 +00:00

at91_machdep.c

Define at91_master_clock in only one file to eliminate warnings about

2014-08-17 16:53:14 +00:00

at91_mci.c

Print the symbolic bit names for the status when we get a timeout.

2014-08-14 23:17:33 +00:00

at91_mcireg.h

Print the symbolic bit names for the status when we get a timeout.

2014-08-14 23:17:33 +00:00

at91_pdcreg.h

…

at91_pinctrl.c

Implement the FDT static pinctl/pinmux spec for Atmel. This will

2014-08-15 16:08:52 +00:00

at91_pio_sam9g20.h

…

at91_pio_sam9g45.h

Add support for the Atmel AT91SAM9G45 CPU.

2012-07-26 08:01:25 +00:00

at91_pio.c

Implement the FDT static pinctl/pinmux spec for Atmel. This will

2014-08-15 16:08:52 +00:00

at91_pioreg.h

Add definitions for the additional PIO pins found on recent AT91 SoCs.

2013-12-02 02:33:03 +00:00

at91_piovar.h

Implement the FDT static pinctl/pinmux spec for Atmel. This will

2014-08-15 16:08:52 +00:00

at91_pit.c

Add support for multipass to Atmel, for both FDT and !FDT cases.

2014-08-14 04:21:25 +00:00

at91_pitreg.h

at91pit->at91_pit for consistnecy with other drivers.

2012-07-11 17:11:54 +00:00

at91_pmc.c

Add support for multipass to Atmel, for both FDT and !FDT cases.

2014-08-14 04:21:25 +00:00

at91_pmcreg.h

Add charge pump current register.

2012-08-10 04:47:20 +00:00

at91_pmcvar.h

Correct the PLLA setting functions and centralize.

2012-08-11 05:45:19 +00:00

at91_reset.S

Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way

2012-07-10 02:14:50 +00:00

at91_rst.c

Add FDT attachment. Flag lost functionality with FDT_HACKS so we can

2014-02-09 20:59:46 +00:00

at91_rstreg.h

at91$DEV->at91_$DEV to match other Atmel drivers. Also, export

2012-07-11 17:11:07 +00:00

at91_rtc.c

Loop reading the RTC registers until the same values are obtained

2012-10-07 20:36:46 +00:00

at91_rtcreg.h

Use the RTC unit to get the time. This works on all known AT91SAM9*

2012-10-07 01:58:32 +00:00

at91_sdramc.c

Add device node for SDRAMC device. Currently just claims device's

2014-02-28 02:59:51 +00:00

at91_shdwc.c

shdwc device for fdt

2014-02-28 03:00:25 +00:00

at91_smc.c

Add standard memory controller helper functions.

2014-01-19 17:45:13 +00:00

at91_smc.h

Add standard memory controller helper functions.

2014-01-19 17:45:13 +00:00

at91_spi.c

Honor the disabled status by only grabbing resources and returning

2014-02-13 16:50:08 +00:00

at91_spireg.h

- Prepend the device description with "AT91" to reflect its nature. [1]

2012-06-03 00:54:10 +00:00

at91_ssc.c

Strip trailing whitespace before other changes.

2012-06-13 04:52:19 +00:00

at91_sscreg.h

…

at91_st.c

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91_streg.h

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91_tcb.c

tcb device for fdt

2014-02-28 03:00:28 +00:00

at91_twi.c

Honor the disabled status by only grabbing resources and returning

2014-02-13 16:50:08 +00:00

at91_twiio.h

…

at91_twireg.h

Add support for the Atmel SAM9XE familiy of microcontrollers, which

2012-04-14 17:09:38 +00:00

at91_usartreg.h

…

at91_wdt.c

FDT attachment...

2014-02-09 21:01:53 +00:00

at91_wdtreg.h

Strip trailing whitespace before other changes.

2012-06-13 04:52:19 +00:00

at91.c

Add AIC to at91sam9260 support, now that it is needed for multipass to

2014-08-14 04:21:31 +00:00

at91board.h

Create a generic way to support multiple boards within an

2012-07-07 05:02:39 +00:00

at91reg.h

The system IRQ is always IRQ 1. Make it so.

2012-07-10 02:39:03 +00:00

at91rm92reg.h

Switch to using PAs rather than VAs for the addresses we map for

2014-01-31 15:38:05 +00:00

at91rm9200_devices.c

Fix a typo: the RXD0 pin is PA18, not PA19.

2013-03-29 18:06:54 +00:00

at91rm9200.c

Move AIC related stuff to own file.

2014-03-08 06:06:50 +00:00

at91rm9200var.h

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

at91sam9g20.c

Move AIC related stuff to own file.

2014-03-08 06:06:50 +00:00

at91sam9g20reg.h

Move AIC related stuff to own file.

2014-03-08 06:06:50 +00:00

at91sam9g45.c

Add data so we can convert a PIO unit number into a base address.

2014-01-15 19:53:36 +00:00

at91sam9g45reg.h

Switch to using PAs rather than VAs for the addresses we map for

2014-01-31 15:38:05 +00:00

at91sam9x5.c

Move AIC related stuff to own file.

2014-03-08 06:06:50 +00:00

at91sam9x5reg.h

Remove bogus define that causes compile errors. Most of the defines

2014-03-09 02:28:30 +00:00

at91sam9260.c

Add AIC to at91sam9260 support, now that it is needed for multipass to

2014-08-14 04:21:31 +00:00

at91sam9260reg.h

Add AIC to at91sam9260 support, now that it is needed for multipass to

2014-08-14 04:21:31 +00:00

at91soc.c

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91soc.h

Make the SoC stuff a little more modular, and start to move away from

2012-07-11 20:17:14 +00:00

at91var.h

Make at91_soc_id() public.

2014-03-08 05:03:56 +00:00

board_bwct.c

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

board_eb9200.c

Fix board ID too...

2014-02-13 15:47:41 +00:00

board_ethernut5.c

uboot should be telling us it is an ETHERNUT5 for this board. Tag it

2012-07-14 06:00:37 +00:00

board_hl200.c

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

board_hl201.c

Connect NAND for the SAM9260EK eval board, as well as the HotE HL-201.

2014-01-19 17:59:34 +00:00

board_kb920x.c

Configure the peripheral pins for MCI devices. Eliminate the now-unused

2012-07-15 05:41:43 +00:00

board_qila9g20.c

Create a generic way to support multiple boards within an

2012-07-07 05:02:39 +00:00

board_sam9g20ek.c

Create a generic way to support multiple boards within an

2012-07-07 05:02:39 +00:00

board_sam9x25ek.c

Create a generic way to support multiple boards within an

2012-07-07 05:02:39 +00:00

board_sam9260ek.c

Fix gcc with -Wstrict-prototypes by telling it bi_emac takes no parameters.

2014-01-25 19:36:27 +00:00

board_sn9g45.c

Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.

2012-07-27 16:38:02 +00:00

board_tsc4370.c

Remove extra semicolons.

2014-06-06 16:37:42 +00:00

files.at91

Add support for FDT and !FDT configs on Atmel, though FDT isn't

2014-08-14 04:21:14 +00:00

if_ate.c

Don't bother clearing maps for static DMA allocations to NULL. Instead,

2014-06-17 18:10:06 +00:00

if_atereg.h

…

if_macb.c

Fix various NIC drivers to properly cleanup static DMA resources.

2014-06-11 14:53:58 +00:00

if_macbreg.h

…

if_macbvar.h

Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this

2013-11-30 22:17:27 +00:00

std.at91

Set machine correctly on ARM. This allows universe to use the correct world

2012-08-18 05:48:19 +00:00

std.at91sam9

Set machine correctly on ARM. This allows universe to use the correct world

2012-08-18 05:48:19 +00:00

std.at91sam9g45

Set machine correctly on ARM. This allows universe to use the correct world

2012-08-18 05:48:19 +00:00

std.atmel

Add support for multipass to Atmel, for both FDT and !FDT cases.

2014-08-14 04:21:25 +00:00

std.bwct

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.eb9200

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.ethernut5

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.hl200

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.hl201

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.kb920x

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.qila9g20

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.sam9g20ek

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.sam9x25ek

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.sam9260ek

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.sn9g45

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

std.tsc4370

Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with

2014-01-28 09:12:04 +00:00

uart_bus_at91usart.c

Remove redundant declaration for uart devclass.

2014-01-24 16:50:15 +00:00

uart_cpu_at91usart.c

Remove redundant declaration for uart devclass.

2014-01-24 16:50:15 +00:00

uart_dev_at91usart.c

Style(9) nit: Use tab here.

2014-02-27 08:19:19 +00:00