Until now, the objects stored in a mempool were internally stored in a
ring. This patch introduces the possibility to register external handlers
replacing the ring.
The default behavior remains unchanged, but calling the new function
rte_mempool_set_ops_byname() right after rte_mempool_create_empty() allows
the user to change the handler that will be used when populating
the mempool.
This patch also adds a set of default ops (function callbacks) based
on rte_ring.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fixes memory leaks detected by Coverity. These are due to ephemeral
memory allocations not being freed when errors occur.
Coverity issue: 127348
Fixes: e2aae1c1ce ("ethdev: remove name from extended statistic fetch")
Signed-off-by: Remy Horton <remy.horton@intel.com>
SNOW3G and KASUMI unit tests are very similar and
they were using duplicated code, so this commit
refactor and remove some of the duplicated functions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
With the new libsso library, buffers can be encrypted/decrypted,
providing an offset in bits, so an extra unit test has been
added to cover this case.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Snow3G PMD supports now buffers that are non byte multiple,
so tests to cover this case have been added.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
No padding was added in the input buffers for snow3G tests,
due to a wrong calculation of the length (should be multiple
of the block size). This fix takes into account the case
where the length is not byte multiple.
Fixes: 8bdf665fe6 ("app/test: add SNOW 3G")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Instead of modifying the content of the buffers, to compare them
at bit-level, use the new macro TEST_ASSERT_BUFFERS_ARE_EQUAL_BIT,
which does not make any modifications in the buffers.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
In order to compare buffers with length and offset in bits,
new macros have been created, which use the previous compare function
to compare full bytes and then, compare first and last bytes of
each buffer separately.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Instead of using the previous RTE_APP_TEST_DEBUG macro,
to dump memory when it was enabled (with rte_hexdump),
a new TEST_HEXDUMP is defined, which will call rte_hexdump
if RTE_LOG_LEVEL is set to RTE_LOG_DEBUG.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
When RTE_APP_TEST_DEBUG is set, there were some errors:
app/test/test_cryptodev.c: In function ‘create_gcm_operation’:
app/test/test_cryptodev.c:3619:18: error: ‘struct rte_crypto_op’ has no member named ‘digest’
ut_params->op->digest.data,
^
app/test/test_cryptodev.c:3620:18: error: ‘struct rte_crypto_op’ has no member named ‘digest’
ut_params->op->digest.length);
^
app/test/test_cryptodev.c:3662:41: error: ‘struct rte_crypto_op’ has no member named ‘iv’
rte_hexdump(stdout, "iv:", ut_params->op->iv.data, iv_pad_len);
^
app/test/test_cryptodev.c:3664:17: error: ‘struct rte_crypto_op’ has no member named ‘additional_auth’
ut_params->op->additional_auth.data, aad_len);
Fixes: eec136f3c5 ("aesni_gcm: add driver for AES-GCM crypto operations")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Cryptodev performance tests do not need to use any function
from rte_hexdump.h.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Updating the AES performance test in line with snow3g performance test.
Output format has been updated so as to get better understanding of numbers.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adding performance test for snow3g wireless algorithm.
Performance test can run over both software and hardware.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
This patch adds the HMAC-SHA224 and HMAC-SHA384 digest generation and
verification tests to crypto
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch reworks the crypto AES unit test by introducing a new unified
test function
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Using of the /dev/stdin generates a warning when compiling on FreeBSD:
objcopy: Warning: '/dev/stdin' is not an ordinary file
app/test/Makefile:78: recipe for target 'test_resource_c.res.o' failed
# ls -l /dev/stdin
lrwxr-xr-x 1 root wheel 4 Jun 17 12:24 /dev/stdin -> fd/0
Replace /dev/stdin by a temporary file.
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Tested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The objcopy and tar commands were printed even in quiet mode.
They are now replaced by a simple line and still visible in verbose mode.
Fixes: ab64f5df80 ("app/test: support resources externally linked")
Fixes: 66819e6c11 ("app/test: support resources archived by tar")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Call rte_pdump_init and rte_pdump_uninit for packet
capturing initialization and uninitialization.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The new pdump tool is added for packet capturing on dpdk.
This tool runs as secondary process by default.
Tool facilitates the command line options like
port, device_id, queue which user should pass on
to the tool to request the packet capture on those devices.
Tool creates the rte ring, mempool and pcap vdev and
calls the enable API of the pdump library with port/device_id,
queue, ring and mempool as arguments to enable the packet
capture on specific devices and gets the packets from the
primary process over the ring. Once the packets are
received, those packets will be send to the pcap vdev.
Tool can be terminated by using ctrl+c(SIGINT) upon which tool
calls the disable API of the pdump library to disable the packet capture
and dequeues the rest of the packets from the ring and sends them on
to the pcap vdev, then after releases all allocated resources.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Calling rte_eth_dev_rss_hash_update without checking return value.
Fixed by handle return value and print out error status.
Coverity issue: 119251
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch show topology at forwarding start.
"show config fwd" also does this, but showing it directly can reduce the
possibility of misconfiguration.
Currently fwd_config_display() calls fwd_config_setup(), this misleading
behavior will be fixed in other patches.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch removes constraints in rxq handling when multiqueue is enabled
to handle all the rxqs.
Current testpmd forces a dedicated core for each rxq, some rxqs may be
ignored when core number is less than rxq number, and that causes confusion
and inconvenience.
One example: an engineer was doing multiqueue test, there're 2
ports in guest each with 4 queues, and testpmd was used as the forwarding
engine in guest, as usual he used 1 core for forwarding, as a results he
only saw traffic from port 0 queue 0 to port 1 queue 0, then a lot of
emails and quite some time are spent to root cause it, and of course it's
caused by this unreasonable testpmd behavior.
Moreover, even if we understand this behavior, if we want to test the
above case, we still need 8 cores for a single guest to poll all the
rxqs, obviously this is too expensive.
We met quite a lot cases like this, one recent example:
http://openvswitch.org/pipermail/dev/2016-June/072110.html
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds throughput numbers (in the period since last use of this
command) in port statistics display for "show port stats (port_id|all)".
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch enables configurable tx_first burst number.
Use "start tx_first (burst_num)" to specify how many bursts of packets to
be sent before forwarding start, or "start tx_first" like before for the
default 1 burst send.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds retry option in testpmd to prevent most packet losses.
It can be enabled by "set fwd <mode> retry". All modes except rxonly
support this option.
Adding retry mechanism expands test case coverage to support scenarios
where packet loss affects test results.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Stop forwarding on exit whether all ports are started or not.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move call to init_fwd_streams from start_port function
to start_packet_forwarding function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add call to fwd_config_setup to init_config.
Add call to fwd_config_setup for corelist, coremask and nbcore setup.
Add call to fwd_config_setup for portlist, portmask and nbport setup.
Add call to fwd_config_setup for rxq, txq, rxd and txd setup.
Remove fwd_config_setup from fwd_config_display.
Call the pkt_fwd_config_display function directly,
and remove the fwd_config_display wrapper function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add new function port_is_bonding_slave
Use this function in stop_port and close_port functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add calls to port_is_forwarding function in stop_port and
close_port functions to check that port is not forwarding.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Do not update forwarding configuration when attaching or detaching a port
Remove checks on test_done variable.
Remove code to update forwarding configuration.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There are 2 new fake devices for testing PCI infra. All the fake devices
are now identified by non-existing vendor and device IDs so there is no
real driver to bind to them. The testing drivers match those IDs.
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The commit 66819e6 has introduced a dependency on libarchive to be able
to use some tar resources in the unit tests.
It is now an optional dependency because some systems do not have it
installed.
If CONFIG_RTE_APP_TEST_RESOURCE_TAR is disabled, the PCI test will not
be run. When a "configure" script will be integrated, the libarchive
availability could be checked to automatically enable the option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Recent CPU's can easily wrap around a 32-bit unsigned int in
the mempool perf test. Increase to a 64-bit uint.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Bond device name was too long (grather than 32 signs) that
cause mempool allocation to fail.
Fixes: 92073ef961 ("bond: unit tests")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
app/test/test_cryptodev.c:
In function ‘create_snow3g_cipher_operation_oop.clone.15’:
x86_64-native-linuxapp-gcc/include/rte_memcpy.h:796:14
error: array subscript is above array bounds.
In test_cryptodev.c:
2429 rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
When iv_len is declared as 'unsigned int', rte_memcpy evaluates code for
buffer size bigger than 255, but while 'iv' array is 64 bytes long, it
causes 'above array bounds' warning in gcc 4.5 and breaks compilation.
Using uint8_t as a size of copied block prevents to evaluate in rte_memcpy
code for length bigger than 255, causing the problem.
The root of this issue and solution is the same as for commit 2c007ea106
("app/test: fix array overflow warning with gcc 4.5")
Fixes: 9727af14b0 ("app/test: add out-of-place symmetric crypto operations")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
'red_autotest' changed to run only functional tests without test #4 which was
taking ~53 seconds. 'red_autotest' takes ~2[s] now.
'red_perf' has been added to run performance tests only).
'red_all' has been added to run all functional tests (including #4) and
perfromance tests. This reflects current 'red_autotest' behavior.
Other changes:
- machine TSC clock frequency detection takes place only once now.
- timeouts and number of iterations in functional tests have been reduced
in order to shorten test duration.
Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
Dumping of devices in a unittest is useless. Instead, test whether
the test has been set up well - i.e. there are no devices.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The SYSFS_PCI_DEVICES is a constant that makes the PCI testing
difficult as it points to an absolute path. We remove using this
constant and introducing a function pci_get_sysfs_path that gives
the same value. However, the user can pass a SYSFS_PCI_DEVICES env
variable to override the path. It is now possible to create a fake
sysfs hierarchy for testing.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The current test_pci is just a single test case that tests the
blacklisting of devices. Rename it to test_pci_blacklist and call it
from the test_pci. The setup and cleanup are moved out of the
test_pci_blacklist entirely to cover all other tests.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The test unregisters all drivers before start. The drivers were stored
into a fixed-sized array. This is inflexible. This patch change this to
utilize a linked list for the same purpose.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
When a more complex resource (a file hierarchy) is needed, packing
every single file as a single resource would be very ineffective. For
that purpose, it is possible to pack the files into a tar archive,
extract it before test from the resource and finally clean up all the
created files.
This patch introduces functions resource_untar and resource_rm_by_tar
to perform those tasks. An example of using those functions is included
as a test.
A new dependency is required to build the app/test: libarchive.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
A resource can be written into the target filesystem by calling
resource_fwrite or resource_fwrite_file. Such file can be created
before a test is started and removed after the test finishes.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
To include resources from other source that the C source code we
can take advantage of the objcopy behaviour, i.e. packing of an
arbitrary file as an object file that is linked to the target program.
A linked object file is always accessible as a pair
extern const char beg_<name>;
extern const char end_<name>;
(extern const char siz_<name>;)
A unit test that packs the resource.c source file is included.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Certain internal mechanisms of DPDK access different file system
structures (e.g. /sys/bus/pci/devices). It is difficult to test
those cases automatically by a unit test when such path is not
hard-coded and there is no simple way how to distribute fake ones
with the current testing environment.
This patch adds a possibility to declare a resource embedded in
the test binary itself. The structure resource cover the generic
situation - it provides a name for lookup and pointers to the
embedded data blob. A resource is registered in a constructor by
the macro REGISTER_RESOURCE.
Some initial tests of simple resources is included and added into
the group_1.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The log history uses rte_mempool. In order to remove the mempool
dependency in EAL (and improve the build), this feature is deprecated.
The ABI is kept but the behaviour is now voided because it seems this
function was not used. The history can be read from syslog.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
prefetch the next packet data address in advance in forwarding loop
for performance improvement.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Enhance the logs related to mbuf pool creation. Display an info level
log when creating the mbuf, and display the error as a string on failure.
After the patch, we have:
[...]
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=331456, \
size=2176, socket=0
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed: Cannot allocate \
memory
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all txqflags <value>" allows for
specifying txq_flags value in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all scatter on|off" allows for
controlling rxmode.enable_scatter in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter allows for controlling rxmode.enable_scatter
which in turn allow for multi-segment packet receive tests.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch provides counter mode support to AES-NI multi-buffer library.
The following cipher algorithm is enabled:
- RTE_CRYPTO_CIPHER_AES_CTR
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removed comparison against $CC in Makefiles as
in cross-compiling mode CC can be a different string
instead of string "gcc"
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
A bug has been detected by valgrind:
Invalid write of size 1
by 0x86ECC76: sprintf (in /usr/lib/libc-2.23.so)
by 0x430B0A: commands_init (in build/app/test)
by 0x42F215: main (in build/app/test)
Address 0x9d72ff2 is 0 bytes after a block of size 1,346 alloc'd
at 0x78C1BD0: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x430AE4: commands_init (in build/app/test)
by 0x42F215: main (in build/app/test)
The commands buffer is exactly 1346 B long so there is an access just
after the buffer. The sprintf always writes '\0' at the end of the string.
The '#' separator adds 1 B more to each string. This is correct until the
last string is sprinted there. The last one is 1 B longer then expected,
i.e.:
strlen(t->command) + strlen("#") + ONE_FOR_ZERO
Fixes: 727909c592 ("app/test: introduce dynamic commands list")
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The cycles test was wrongly in the group of mempool perf test.
It is moved in parallel test group 1 with timer test.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Adjust memory parameter (--socket-mem) of the autotests
to be able to make fast_test in a constrained environment (e.g. a VM).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The autotests are too long to be run often.
This patch reduces the needed time of some tests in fast_test.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The LPM performance tests should not be mixed with
functional tests: they are long and show some statistics.
LPM6 functional tests are added to parallel tests.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The log unit test was checking display of low priority messages.
It was not working if RTE_LOG_LEVEL is not RTE_LOG_DEBUG.
It is even easier to see since the default level is INFO (9b9d7ca).
Now the test use ERR and CRIT levels which should be always enabled
while not trigerring syslog output on the console.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rework the mempool test to better indicate where it failed,
and, now that this feature is available, add the freeing of the
mempool after the test is done.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Check the return value of snprintf to ensure that the name of
the object is not truncated.
By the way, update the test to avoid to trigger an error in
that case.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that mempool library provide functions to populate with anonymous
mmap'd memory, we can remove this specific code from test-pmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do not use paddr table to store the mempool memory chunks.
This will allow to have several chunks with different virtual addresses.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit removes MEMPOOL_IS_CONTIG().
The next commits will change the behavior of the mempool library so that
the objects will never be allocated in the same memzone than the mempool
header. Therefore, there is no reason to keep this macro that would
always return 0.
This macro was only used in app/test.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit renames mempool_obj_ctor_t as mempool_obj_cb_t.
In next commits, we will add the ability to populate the
mempool and iterate through objects using the same function.
We will use the same callback type for that. As the callback is
not a constructor anymore, rename it into rte_mempool_obj_cb_t.
The rte_mempool_obj_iter_t that was used to iterate over objects
will be removed in next commits.
No functional change.
In this commit, the API is preserved through a compat typedef.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf_detach() function should decrease refcnt on a direct
buffer as stated in doc/guides/prog_guide/mbuf_lib.rst:
"whenever the indirect buffer is detached, the reference counter on the
direct buffer is decremented."
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_mempool structure is changed, which will cause an ABI change
for this structure. Providing backward compat is not reasonable
here as this structure is used in multiple defines/inlines.
Allow mempool cache support to be dynamic depending on if the
mempool being created needs cache support. Saves about 1.5M of
memory used by the rte_mempool structure.
Allocating small mempools which do not require cache can consume
larges amounts of memory if you have a number of these mempools.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
While parsing token string there may be several modes:
- fixed single string
- multi-choice single string
- any single string
This patch add one more mode - any multi string.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
CID 13307 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
fixed_size_dest: You might overrun the 128 byte fixed-size string fwd_modes
by copying fwd_eng->fwd_mode_name without checking the length.
Fixes: 769ce6b178 ("app/testpmd: list forwarding engines")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Fix issue reported by Coverity.
Coverity ID 13240
This could cause an immediate crash or incorrect computation.
In search_ip5tuples: An expression which may be zero is used
as a divisor in floating-point arithmetic.
divide_by_zero: In expression (long double)tm / pkt,
division by expression pkt which may be zero has undefined behavior.
Fixes: 26c057ab6c ("acl: new test-acl application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With LIBRTE_PMD_XENVIRT enabled testpmd is built in a way to ONLY work
in XEN environments.
It will surface as:
PMD: gntalloc: ioctl error
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed
With LIBRTE_PMD_XENVIRT enabled this now tries the xen style grant
table allocation, but falls back gracefully for the normal allocation.
The only thing left in the log will be the
PMD: gntalloc: ioctl error
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The mempool element size is set to 0, but 4 bytes are written in
my_obj_init():
uint32_t *objnum = obj;
memset(obj, 0, mp->elt_size);
*objnum = i;
Change the MEMPOOL_ELT_SIZE constant to sizeof(uint32_t). This fixes
memory corruptions since we were writing outside of the object
boundaries.
Fixes: 104a92bd02 ("app: add reentrancy tests")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
DPDK/app/test/test_cryptodev.c:
In function 'test_snow3g_encrypted_authentication.clone.3':
DPDK/x86_64-ivshmem-linuxapp-gcc/include/rte_memcpy.h:796:14: error:
array subscript is above array bounds
In lines like:
rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
when "iv" is 64 bytes long array, and "iv_len" is "unsigned int",
compiler tries to evaluate also a code for array size larger than 255 bytes
long and reports error "array subscript is above array bounds" in line:
rte_memcpy.h:796
rte_mov128((uint8_t *)dst + 128, (const uint8_t *)src + 128);
caused by evaluation to:
rte_mov128((uint8_t *)sym_op->cipher.iv.data + 128, (const uint8_t *)iv
+ 128);
where "iv" is 64 bytes long buffer and "iv + 128" point out of it, gcc 4.5.
Using uint8_t as a size of copied block prevents to evaluate in rte_memcpy
code for length bigger than 255, causing the problem.
Fixes: 8bdf665fe6 ("app/test: add SNOW 3G")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The previous code in func_reentrancy autotest was doing in parallel
something close to:
name = "common_name";
do several times {
obj = allocate_an_object(name) // obj = ring, mempool, hash, lpm, ...
if (obj == NULL && lookup(name) == NULL)
return TEST_FAIL;
}
This code is not safe. For instance:
mempool_create() is called on core 0, it creates a ring. At the same
time on core 1, mempool_create() is called too and the creation of the
ring fails (EEXIST). But the mempool lookup can fail on core 1 if
the mempool is not added in the list by core 0.
This commit fixes the func_reentrancy autotest that now works with all
tested class of objects.
Fixes: 104a92bd02 ("app: add reentrancy tests")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change rte_hash*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the hash API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change rte_lpm*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the lpm API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The hash test (located in group_2) may require more than 64MB of memory,
especially if the memory is physically fragmented, making the test to
fail. So increase the memory to 128MB to avoid this issue.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since commit a88ba49e51, values larger than 4 are allowed,
the autotests need to be updated accordingly.
Fixes: a88ba49e51 ("config: fix CPU and memory parameters on IBM POWER8")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The code for checking and parsing speed/duplex was duplicated.
The new function is also checking the speed/duplex combination.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Added AES and snow3g Authenticated encryption and decryption tests
for out-of-place operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
The test application calls printf(...) with the suite->suite_name argument.
The intent (based on whitespace) in the printf is to check suite->suite_name
first and then apply the printf. This doesn't happen due to missing brackets.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Build log:
/root/dpdk/app/test-pmd/cmdline.c:6687:45: error: no member named
's6_addr32' in 'struct in6_addr'
rte_be_to_cpu_32(res->ip_value.addr.ipv6.s6_addr32[i]);
This is caused by macro "s6_addr32" not defined on FreeBSD and testpmd
swap big endian parameter to host endian. Move the swap action to i40e
ethdev will fix this issue.
Fixes: 7b1312891b ("ethdev: add IP in GRE tunnel")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
This patch extends the commands for changing flow director filter's input
set. It adds vlan as a possible filter input field.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends commands for changing a flow director filter's input
set. It adds tos, protocol and ttl as filter's input fields, and removes
the words selection from flex payloads.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This test expects that a vdev is instanciated on the command
line. If it's not the case, just skip this part.
Fixes: 4ea3801b32 ("app/test: fix ring unit test")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
For GLIBC < 2.17 it is necessery to add -lrt for linker
from glibc > 2.17 The `clock_*' suite of functions (declared in <time.h>) is now
available directly in the main C library. This affect Ubuntu 12.04 in i686
and other older Linux Distros).
Fixes: 4758404a30 ("mk: fix eal shared library dependencies")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
This patch fixes error #188: enumerated type mixed with another type,
when uint32_t is casted on enum type in icc.
Fixes: 05f1b9c82e ("app/testpmd: add commands for L2 tunnel config")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Comment for "ierrors" counter says that it counts erroneous received
packets. But for some reason "imissed" counter is added to "ierrors"
counter in most drivers.
It is a mistake, because missed packets are obviously not received.
This patch fixes it.
Fixes: 70bdb18657 ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Fixes: 6bfe648406 ("i40e: add Rx error statistics")
Fixes: 856505d303 ("cxgbe: add port statistics")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Updated ip_pipeline app is using new changes from LPM library
(Increased number of next hops and added new config structure
for LPM IPv4).
Fixes: f1f7261838 ("lpm: add a new config structure for IPv4")
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The bonding PMD in mode 4 puts all enslaved interfaces into promiscuous
mode in order to receive LACPDUs and must filter unwanted packets
after the traffic has been "collected". Allow broadcast and multicast
through so that ARP and IPv6 neighbor discovery continue to work.
Fixes: 46fb436836 ("bond: add mode 4")
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
There are two places that need -lm (test app and librte_sched) and
exactly one that needs -lrt (librte_sched). Add the relevant
DT_NEEDED entries to both, and eliminate the bogus discrepancy
between Linux and BSD EXECENV_LDLIBS wrt these libs.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Added testpmd support to validate zero nb_rxq/nb_txq
changes of ethdev (d505ba8).
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change the fields of outer_mac and inner_mac in struct
rte_eth_tunnel_filter_conf from pointer to struct in order to
keep the code's readability.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add the CLIs to support the E-tag operation.
1, Offloading of E-tag insertion and stripping.
2, Forwarding the E-tag packets to pools based on the GRP and E-CID_base.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add CLIs to config ether type of l2 tunnel, and to enable/disable
a type of l2 tunnel.
Now only e-tag tunnel is supported.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enabled CONFIG_RTE_LIBRTE_LPM, CONFIG_RTE_LIBRTE_TABLE,
CONFIG_RTE_LIBRTE_PIPELINE libraries for arm and arm64
TABLE, PIPELINE libraries were disabled due to LPM library dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
-Used architecture agnostic xmm_t to represent 128 bit SIMD variable
-Introduced vect_* API abstraction in app/test to test rte_lpm_lookupx4
API in architecture agnostic way
-Moved rte_lpm_lookupx4 SSE implementation to architecture specific
rte_lpm_sse.h file to accommodate new rte_lpm_lookupx4 implementation
for a different architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch provides the implementation of a NULL crypto PMD, which supports
NULL cipher and NULL authentication operations, which can be chained together
as follows:
- Authentication Only
- Cipher Only
- Authentication then Cipher
- Cipher then Authentication
As this is a NULL operation device the crypto operations which are submitted for
processing are not actually modified and are stored in a queue pairs processed
packets ring ready for collection when rte_cryptodev_burst_dequeue() is called.
The patch also contains the related unit tests function to test the PMDs
supported operations.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch provides the implementation of an AES-NI accelerated crypto PMD
which is dependent on Intel's multi-buffer library, see the white paper
"Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors"
This PMD supports AES_GCM authenticated encryption and authenticated
decryption using 128-bit AES keys
The patch also contains the related unit tests functions
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
Wireless algorithms like Snow3G needs input in bits.
In this patch, changes have been made to incorporate this requirement
in both QAT and SW PMD.
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms SNOW 3G UEA2 and UIA2
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_SNOW3G_UEA2
- RTE_CRYPTO_SYM_AUTH_SNOW3G_UIA2
The SNOW 3G hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library. For library download and build instructions,
see the documentation included (doc/guides/cryptodevs/snow3g.rst)
The patch also contains the related unit tests function to test the PMD
supported operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch fix the QAT autotest failure when run for multiple times.
it was caused as mbuf was not freed.
Fixes: 202d375c60 (app/test: add cryptodev unit and performance tests)
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
As cryptodev library does not depend on mbuf_offload library
any longer, this patch removes it.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch modifies the crypto burst enqueue/dequeue APIs to operate on bursts
rte_crypto_op's rather than the current implementation which operates on
rte_mbuf bursts, this simplifies the burst processing in the crypto PMDs and the
use of crypto operations in general, including new functions for managing
rte_crypto_op pools.
These changes continues the separation of the symmetric operation parameters
from the more general operation parameters, which will simplify the integration
of asymmetric crypto operations in the future.
PMDs, unit tests and sample applications are also modified to work with the
modified and new API.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch splits symmetric specific definitions and
functions away from the common crypto APIs to facilitate the future extension
and expansion of the cryptodev framework, in order to allow asymmetric
crypto operations to be introduced at a later date, as well as to clean the
logical structure of the public includes. The patch also introduces the _sym
prefix to symmetric specific structure and functions to improve clarity in
the API.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
- Fixed >80char lines in test file
- Removed unused elements from stats struct
- Removed unused objects in rte_cryptodev_pmd.h
- Renamed variables
- Replaced leading spaces with tabs
- Improved performance results display in test
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Two new pipeline API functions have been added to the library. The packet
hijack API function can be called by any input/output port or table action
handler to remove selected packets from the burst of packets read from one
of the pipeline input ports and then either send these packets out through
any pipeline output port or drop them.
Another packet drop API function can be used by the pipeline action
handlers (port in/out, table) to drop the packets selected using packet
mask. This function updates the drop statistics counters correctly.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Currently, there is no mechanism that allows the pipeline ports (in/out)
and table action handlers to override the default forwarding decision
(as previously configured per input port or in the table entry). The port
(in/out) and table action handler prototypes have been changed to allow
pipeline action handlers (port in/out, table) to remove the selected
packets from the further pipeline processing and to take full ownership
for these packets. This feature will be helpful to implement functions
such as exception handling (e.g. TTL =0), load balancing etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
A new rte_lpm_config structure is used so LPM library will allocate
exactly the amount of memory which is necessary to hold application’s
rules.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch extend next_hop field from 8-bits to 24-bits in LPM library
for IPv4.
Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Previously, max_socket was set to the highest numbered socket with
an enabled lcore. The intent is to set it to the highest socket
regardless of it being enabled.
Fixes: 7acf894d07 ("app/testpmd: detect numa socket count")
Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When using testpmd, sometimes we forget the right order of port_id and
vid in "tx_vlan set (port_id) vlan_id[, vlan_id_outer]\n" command, and
input "tx_vlan set 51 0", we'll get a strange prompt saying "Error, as
QinQ has been enabled.".
In cmd_tx_vlan_set_parsed function, the first thing we do is checking
the port's vlan_offload capability, rather than checking validity of the
port_id, therefore if it's an invalid port_id we'll get the above wrong
message. We should always make sure that we get a valid port_id before
we do other things.
It's the similar issue for cmd_tx_vlan_set_qinq_parsed function.
Fixes: 92ebda07ee ("app/testpmd: add qinq stripping and insertion")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
armv8.1 adds support for new atomic instructions.
Linux kernel v4.3 onwards, the presence of atomic instruction
support can detect through HWCAP_ATOMICS
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
CONFIG_RTE_LIBRTE_EAL_*APP can be replaced by CONFIG_RTE_EXEC_ENV_*APP.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Fixed issue of byte order in ethdev library that the structure
for setting fdir's mask and flow entry is inconsist and made
inputs of mask be in big endian.
Fixes: 2d4c1a9ea2 ("ethdev: add new flow director masks")
Fixes: 76c6f89e80 ("ixgbe: support new flow director masks")
Reported-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Several NICs can handle 512 entries/queues in their RETA table,
an 8 bit field is not large enough for them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add some small key lengths (below 4 bytes), and fix odd key lengths
expected returned values for CRC computation to match real CRC values.
Fixes: 6298d2c55a ("app/test: add new functional tests for hash functions")
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
cryptodev_aesni_mb_init was returning the device id of
the device just created, but rte_eal_vdev_init
(the function that calls the first one), was expecting 0 or
negative value.
This made impossible to create more than one aesni_mb device
from command line.
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The patch c344eab3ee has moved the hardware definition of CPU flags.
Now the functions checking these hardware flags are also moved.
The function rte_cpu_get_flag_enabled() is no more inline.
The benefits are:
- remove rte_cpu_feature_table from the ABI (recently added)
- hide hardware details from the API
- allow to adapt structures per arch (done in next patch)
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
No need to split mbuf structure to two cache lines for 128-byte cache
line size targets as it can fit on a single 128-byte cache line.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The file rte_config.h is automatically generated and included.
No need to #include it.
The example performance-thread needs a makefile fix to avoid
overwriting the default cflags.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
In fedora 22 with GCC version 5.3.1, when compile,
will result an error:
include/rte_memcpy.h:309:7: error: "RTE_MACHINE_CPUFLAG_AVX2"
is not defined [-Werror=undef]
#elif RTE_MACHINE_CPUFLAG_AVX2
Fixes: 9484092baa ("eal/x86: optimize memcpy for AVX512 platforms")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
IEEE1588 forwarding mode uses same port to receive and transmit packets.
In this mode, the MAC address in the packets are not touched,
and therefore, packets could be sent with the same destination
MAC address as the MAC address of the port that is transmitting,
which causes the packet to be dropped in some NICs.
In order to avoid this scenario, MAC addresses are swapped
before packet is sent out.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The standard for DPDK is to use memset() not bzero which
is a leftover BSD-ism.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: ab3257e13d ("app/testpmd: add command to display queue info")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If eth_ring vdevs are created from the command line with the --vdev option,
they create their own rings which are not shared by other vdevs.
Some of tests in this suite require that the vdevs share rings, so some
of the tests fail.
For vdevs to share rings they must be created in the test code with the
rte_eth_from_rings() function using rings created with the rte_ring_create()
function.
Use the command line option --vdev=eth_ring0 to create port 0.
This option is not mandatory for the tests to pass. It allows some additional
functional tests on cmd-line created rings to be executed.
Create two rings and five ethdevs in test_pmd_ring.c for ports 1 to 5,
and then use these to run the unit tests on the pmd ring functionality.
Improve test output by adding the port number to printf statements,
and adding a printf describing each test.
Fixes: 572eb3cd83 ("ring: simplify unit tests")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In the KNI unit test, if all test cases passed, it should
return with 0. This patch fixes the issue of returning
wrong value.
Fixes: fc27caaafd ("kni: remove deprecated functions")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Renamed function name to comply with coding standard.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
memory_autotest loops infinitely when at least one the memsegs
is bigger than 4GB.
The issue is the result of an integer overflow/wraparound of
the offset variable.
Fix it by using the correct type (size_t).
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix crash in pmd_perf_test autotest (div by 0) when no packets received
Also fixes the fact that the test passes even if exec_burst fails
To repeat the issue:
The system must be incorrectly set up so that all packets will be lost,
i.e. no loopback cable, etc. This is an edge case, but still the test
should not crash or pass when failing.
run the test app
RTE>> set_rxtx_sc poll_before_xmit
RTE>> pmd_perf_autotest
--snip--
> Generate 4096 packets @socket 1
> start to receive total expect 4096
> 4096 packets lost, IDLE 10000 times
> Floating point exception (core dumped)
Signed-off-by: David Hunt <david.hunt@intel.com>
In order to be installed system-wise, this application needs
a prefix. So it makes clear that it is DPDK related.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The cmdline test is missing a necessary dependency on other components.
This caused a build failure when doing parallel builds.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
app/test/test_cryptodev_perf.c(1837): error #192: unrecognized
character escape sequence
printf("\n%u\t%u\t\%u\t\t%u\t\t%u", dev_num, 0,
"\%u" is the root cause of this issue, just fix it.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
This patch relates to ABI change proposed for librte_table.
The key_mask parameter is added for 8-byte and 16-byte
key extendible bucket and LRU tables.The release notes
is updated and the deprecation notice is removed.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added to acl table unit test check for bulk add and bulk delete.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
armv8-a has optional CRC32 extension, march=armv8-a+crc enables code
generation for the ARMv8-A architecture together with
the optional CRC32 extensions.
added RTE_MACHINE_CPUFLAG_CRC32 to detect the availability of
CRC32 extension in compile time. At run-time, The RTE_CPUFLAG_CRC32
can be used to find the availability.
armv8-a+crc target support added in GCC 4.9,
Used inline assembly and emulated __ARM_FEATURE_CRC32 to work
with tool-chain < 4.9
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
unit tests are run by using cryptodev_qat_autotest or
cryptodev_aesni_autotest from the test apps interactive console.
performance tests are run by using the cryptodev_qat_perftest or
cryptodev_aesni_mb_perftest command from the test apps interactive
console.
If you which to run the tests on a QAT device there must be one
bound to igb_uio kernel driver.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The implementation uses NEON gcc intrinsic.
Verified with testacl and acl_autotest applications on arm64 architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This implementation is based on IBM POWER version of
rte_cpuflags. We use software emulation of HW capability
registers, because those are usually not directly accessible
from userspace on ARM.
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Testpmd was only printing out second values when printing
RX/TX timestamp value, instead of both second and nanoseconds.
Since resolution of time counters is in nanoseconds,
testpmd should print out both.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
The reorder library unit test was performed under the assumption that
the start sequence number was always 0.
This is not the case anymore as the start sequence number is initialized
by the first packet inserted into the reorder buffer.
This patch updates the unit test to reflect the new behavior.
Fixes: 7e1fa1de8a ("reorder: allow random number as starting point")
Reported-by: Mukesh Dua <mukesh.dua81@gmail.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
One of the ways to reproduce the issue:
testpmd <EAL-OPTIONS> -- -i --txqflags=0
testpmd> set fwd txonly
testpmd> set txpkts 64,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4
testpmd> set txsplit rand
testpmd> start
After some time TX on ixgbe queue will hang,
and all packet transmission on that queue will stop.
This bug was first reported and investigated by
Vlad Zolotarov <vladz@cloudius-systems.com>:
"We can reproduce this issue when stressed the xmit path with a lot of highly
fragmented TCP frames (packets with up to 33 fragments with non-headers
fragments as small as 4 bytes) with all offload features enabled."
The root cause is that ixgbe_xmit_pkts() in some cases violates the HW rule
that the distance between TDs with RS bit set should not exceed 40 TDs.
>From the latest 82599 spec update:
"When WTHRESH is set to zero, the software device driver should set the RS bit
in the Tx descriptors with the EOP bit set and at least once in the 40
descriptors."
The fix is to make sure that the distance between TDs with RS bit set
would never exceed HW limit.
As part of that fix, tx_rs_thresh for ixgbe PMD is not allowed to be greater
then to 32 to comply with HW restrictions.
With that fix slight slowdown for the full-featured ixgbe TX path
might be observed (from our testing - up to 4%).
ixgbe simple TX path is unaffected by that patch.
Reported-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For CSUM forwarding mode add ability to copy & split outgoing packet
into the new mbuf that consists of multiple segments.
For TXONLY and CSUM forwarding modes add ability to make number of
segments in the outgoing packet to vary on a per packet basis.
Number of segments and size of each segment is controlled by
'set txpkts' command.
Split policy is controlled by 'set txsplit' command.
Possible values are: on | off | rand.
Tha allows to increase test coverage for TX PMD codepaths.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
It fixes compile issue on ICC 13.0.0.
Error logs:
app/test-pmd/cmdline.c(8160): error #188: enumerated type mixed
with another type
entry.input.flow.tunnel_flow.tunnel_type =
str2fdir_tunneltype(res->tunnel_type);
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
icmp echo forward engine relies on the core rank rather than the number of
queues available.
This fix is still wrong, because if we set a nb-rxq > nb-txq, then we will
use an invalid txq, but with this, we are aligned on other fwd engines.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
After implementing the fdir new modes for x550, the CLIs are modified.
Forgot to update the related help info and doc.
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Hash_autotest is in test group 2 which had only 32 MB
of memory, which is increased to 64 MB to make it run.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
eal_flags_autotest was broken after commit
19bfa4dd ("eal: make the -n argument optional"),
since the unit test was checking that app would not run
if -n flag was missing, which now it is possible.
Also, subtest test_missing_n_flag() has been renamed
to test_invalid_n_flag(), as now -n flag is not compulsory.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If using multiple cores on a system with hardware transactional
memory support, thread scaling does not work, as there was a single
point in the hash library which is a bottleneck for all threads,
which is the "free_slots" ring, which stores all the indices of
the free slots in the table.
This patch fixes the problem, by creating a local cache per logical core,
which stores locally indices of free slots,
so most times, writer threads will not interfere each other.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Test commands are added to support selecting different length of GRE key.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Test commands are added to support selecting input set, or adding
new input set per different pctype.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Add a performance test for ring pmd, comparing performance of the pmd
compared to the basic rte_ring APIs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds a command to display DCB info in ports.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch changes the testpmd DCB forwarding stream to make it
based on traffic class.
It also fixes some coding style issues.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The "show port X rss-hash" command sometimes displays garbage instead of the
expected RSS hash key because the maximum key length is undefined. When the
requested key is too large to fit in the buffer,
rte_eth_dev_rss_hash_conf_get() does not update it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
DPDK uses a structure to get or set a new hash key (see
eth_rte_rss_hash_conf). rss_hf field from this structure is used in
rss_hash_get_conf to retrieve the hash key and in rss_hash_update uses
it to verify the key exists before trying to update it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
For some ethnet-switch like intel RRC, all the packet forwarded
out by DPDK will be dropped in switch side, so the packet
generator will never receive the packet.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The different fdir mode needs different parameters, so, the parameter *mode*
is introduced to the CLI flow_director_filter and flow_director_mask. This
parameter can pormpt the user to input the appropriate parameters for different
mode.
Please be aware, as we should set the fdir mode, the value of the parameter
pkt-filter-mode, when we start testpmd. We cannot set a different mode for
mask or filter.
The new CLIs are added for the mac vlan and tunnel modes, like this,
flow_director_mask X mode MAC-VLAN vlan XXXX mac XX,
flow_director_mask X mode Tunnel vlan XXXX mac XX tunnel-type X tunnel-id XXXX,
flow_director_filter X mode MAC-VLAN add/del/update mac XX:XX:XX:XX:XX:XX
vlan XXXX flexbytes (X,X) fwd/drop queue X fd_id X,
flow_director_filter X mode Tunnel add/del/update mac XX:XX:XX:XX:XX:XX
vlan XXXX tunnel NVGRE/VxLAN tunnel-id XXXX flexbytes (X,X) fwd/drop queue X
fd_id X.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There're fdir mask and supported flow type in the output of the CLI,
show port fdir. But not every parameter has meaning for all the fdir
modes, and the supported flow type is meaningless for mac vlan and
tunnel modes. So, we output different thing for different mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For testpmd CLI's parameter pkt-filter-mode, there're new values supported for
fdir new modes, perfect-mac-vlan, perfect-tunnel.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When a port is enabled, there're default values for the parameters of
fdir mask. For the new parameters, the default values also need to be
set.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This is a useful default for simple applications where the assignment
of lcores to CPUs doesn't matter. It's also useful for more complex
applications that automatically assign tasks to cores based on the
NUMA topology.
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Currently, there is a MAX_SOCKET macro which artificially limits the
number of NUMA sockets testpmd can use. Anything on a higher socket
ends up using socket zero. This patch replaces this with a variable
set during set_default_fwd_lcores_config() and uses RTE_MAX_NUMA_NODES
where a hard-coded max number of sockets is required.
Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
'virtual' is a keyword and can't be used if the code is to compile with
C++ compilers.
If rte_devargs.h was included in C++ code, compilation with clang++
failed with an error. g++ did not fail, but only because of a bug
that treats it as an anonymous struct with a decl-specifier which it
ignores.
This simply renames the member to 'virt'.
Reported-by: Ming Zhao <mzhao@luminatewireless.com>
Signed-off-by: Christoph Gysin <christoph.gysin@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch relates to ABI change proposed for librte_port. Macros to
access the packet meta-data stored within the packet buffer has been
adjusted to cover the packet mbuf structure.
The LIBABIVER number is incremented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
LPM table and pipeline apps have been modified to
include name parameter of the lpm table.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The function rte_jhash2() was renamed rte_jhash_32b and
macros RTE_HASH_KEY_LENGTH_MAX and RTE_HASH_BUCKET_ENTRIES_MAX
were tagged as deprecated, so they can be removed in 2.2.
RTE_HASH_KEY_LENGTH is replaced in unit tests by an internal macro
for the memory allocation of all keys used.
The library version number is incremented.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The functions and structures are moved to app/test in order to keep
existing unit tests. Some minor changes were done in these functions
because of library scope restrictions.
An enum is also copied in two other applications to keep existing code.
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In table_autotest, the structures containing the parameters
to create the tables were not initialized, and therefore,
some checks could fail and so the unit test.
Also, due to this initialization, one of the tests that was
checking if the table was improperly initialized has been
removed, as it is not needed anymore (duplicated)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In commit: 1129992baa checking for offset alignment was removed.
Unit tests wasn't updated to reflect that change. This patch changes
checks with unaligned offsets to make tests pass.
Fixes: 1129992baa ("port: fix unaligned access to metadata")
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Test failed on verification if number of bytes
transmitted on each slave is not less than 90%
and greater than 110% of mean value of bytes transmitted
thru one slave. This was verified on a real system
but is difficult to achieve using virtualpmd.
That's why for unit tests only, it is sufficient to verify that with
high load (2 seconds transmission) all slaves are transmitting
so the traffic is balanced.
Fixes: 0c8396e6d7 ("bond: unit tests for mode 5")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
'--no-huge' option now can workable with -m option.
Unit test for eal flag should change pass criterion.
Fixes: a7de7e6beb ("eal: allow combining -m and --no-huge")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
In previous setting, mempool size and cache_size were both 32.
It does not satisfy with cache_size checking rule by now.
Cache size should be less than CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and
mempool size / 1.5.
Fixes: 462321b44a ("mempool: limit cache size")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove unused PKT_BURST_SZ]
Add new timer-manage race-condition test: We wrote a test to confirm
our suspicion that we could crash rte_timer_manage() under the right
circumstances. We repeatedly set several timers to expire at roughly
the same time on the master core. The master lcore just delays and runs
rte_timer_manage() about ten times per second. The slave lcores all
watch the first timer (timer-0) to see when rte_timer_manage() is
running on the master, i.e., timer-0's state is not PENDING.
At this point, each slave attempts to reset a subset of the timers to
a later expiration time. The goal here is to have the slaves moving
most of the timers to a different place in the master's pending-list,
while the master is traversing the same next-pointers (the slaves'
sl_next[0] pointers) and running callback functions. This eventually
results in the master traversing a corrupted linked-list.
In our observations, it results in an infinite loop.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
Fix app/test timer stress test 2: Sometimes this test fails and
seg-faults because the slave lcores get out of phase with the master.
The master uses a single int, 'ready', to synchronize multiple slave
lcores through multiple phases of the test.
To resolve, we construct simple synchronization primitives that use one
atomic-int state variable per slave. The master tells the slaves when to
start, and then waits for all of them to finish. Each slave waits for
the master to tell it to start, and then tells the master when it has
finished.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
When close one port twice, testpmd will give out wrong messagse.
testpmd> port stop 0
Stopping ports...
Checking link statuses...
Port 0 Link Up - speed 0 Mbps - full-duplex
Port 1 Link Up - speed 0 Mbps - full-duplex
Done
testpmd> port close 0
Closing ports...
Done
testpmd> port close 0
Closing ports...
Port 0 is now not stopped
Done
testpmd>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
In testpmd, when using "rx_vlan add 1 77", it will be a segment fault
Because the port ID should be less than 32.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
When the bonded port is started it also starts the slave port,
but the slave port status is not set. A slave_flag has been
added to struct rte_port to resolve this issue.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[Thomas: move inclusion used by ixgbe bypass]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A packet is tunnelled if the tunnel type is identified or if it has
an inner part.
Fix also some typos in RTE_PTYPE_INNER_L3_MASK and IP comments.
Fixes: f295a00a2b ("mbuf: add definitions of unified packet types")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In ieee1588fwd.c, timestamp.tv_sec is a time_t variable,
which is a long int, but it was being printed with PRIu64,
causing an issue on 32 bits.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
At this point the stop() and close() functions have already been called.
The rte_eth_promiscuous_disable() function does not return on the VM.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Implement rte_memzone_free which, as its name implies, would free a
memzone.
Currently memzone are tracked in an array and cannot be free.
To be able to reuse the same array to track memzones, we have to
change how we keep track of reserved memzones.
With this patch, any memzone with addr NULL is not used, so we also need
to change how we look for the next memzone entry free.
Add new unit test for rte_memzone_free API.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Some unit test are not relevant anymore. It is the case of those malloc
UTs that checked corner cases when allocating MALLOC_MEMZONE_SIZE
chunks, and the case of those memzone UTs relaying of specific free
memsegs of rhte reserved memzone.
Other UTs just need to be update, for example, to calculate maximum free
block size available.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The original code mistakenly defaulted to X86 when RTE_ARCH_PPC_64 was
left undefined. This did not accommodate other non-PPC/non-X86
architectures. This patch fixes this issue.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since now rte_hash structure is private, a new function
has been added to let the user iterate through the hash table,
returning next key and data associated on each iteration,
plus the position where they were stored.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Usually hash tables not only store keys, but also data associated
to them. In order to maintain the existing API, the old functions
will still return the index where the key was stored.
The new functions will return the data associated to that key.
In the case of the lookup_bulk function, it will return also
the number of entries found and a bitmask of which entries
were found.
Unit tests have been updated to use these new functions.
As a final point, a flag has been added in rte_hash_parameters
to indicate if there are new parameters for future versions,
so there is no need to maintain multiple versions
of the existing functions in the future.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: fix || operator in a precondition check]
Added reset function to be able to empty the table,
without having to destroy and create it again.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch replaces the existing hash library with another approach,
using the Cuckoo Hash method to resolve collisions (open addressing),
which pushes items from a full bucket when a new entry tries
to be added in it, storing the evicted entry in an alternative location,
using a secondary hash function.
This gives the user the ability to store more entries when a bucket
is full, in comparison with the previous implementation.
Therefore, the unit test has been updated, as some scenarios have changed
(such as the previous removed restriction).
Also note that the API has not been changed, although new fields
have been added in the rte_hash structure (structure is internal now).
The main change when creating a new table is that the number of entries
per bucket is fixed now, so its parameter is ignored now
(still there to maintain the same parameters structure).
The hash unit test has been updated to reflect these changes.
As a last note, the maximum burst size in lookup_burst function
hash been increased to 64, to improve performance.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add new unit test for calculating the average table utilization,
using random keys, based on number of entries that can be added
until we encounter one that cannot be added (bucket if full).
Also, replace current hash_perf unit test to see performance more clearly.
The current hash_perf unit test takes too long and add keys that
may or may not fit in the table and look up/delete that may not be
in the table. This new unit test gets a set of keys that we know
that fits in the table, and then measure the time to add/look up/delete
them.
Note that performance numbers include time to take a random key
from a pre-made array of keys, plus a quick check of return value.
Also, as stated above, expect higher numbers, as all operations
in the new unit tests will be successful, which means that
it will take more time, than mixing both successful and unsuccesful
operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_hash structure should not be a public structure,
and therefore it should be moved to the C file and be declared
as internal. rte_hash_hash implementation is also moved
to the C file, as it uses the structure.
This patch also removes part of a unit test that was checking
a field of the structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Refactor the ieee1588_fwd mode in testpmd to use the new ethdev
APIs to enable and read IEEE1588 PTP timestamps.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In test application, the default size of allocated mempool is calculated
as following:
(RTE_MAX_LCORE * (RTE_MEMPOOL_CACHE_MAX_SIZE + max_kept_objects)) - 1
The objective is to ensure that all cores can fill their cache and keep
'max_kept_objects' at the same time. As RTE_MAX_LCORE is 128 and
RTE_MEMPOOL_CACHE_MAX_SIZE is 512 in the default configuration, it can
produce very large mempools (170 MB).
We can replace the number of core by a dynamic value, which drastically
reduces the amount of memory needed for this test (5 MB with 4 cores).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
As querying hash key size in byte was supported, it can be shown
in testpmd after getting the device information if not zero.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch extends flow director commands to support l2_payload flow type.
Test report: http://dpdk.org/ml/archives/dev/2015-June/020238.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If double vlan is detected, its stripped flag and vlan tags can be
printed on rxonly mode. Test command of 'tx_vlan set' is expanded
to set both single and double vlan tags on TX side for each packets
to be sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Not packing this causes -Wcast-align breakage on machines that are
strict on alignment. This patch fixes this bug.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
