This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The ixgbe PF and VF use the same default value
for EITR defined in header file.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since we move to new offload APIs, txq_flags is no long needed.
This patch remove the dependence on that.
Fixes: 51215925a32f ("net/ixgbe: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182a5 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182a5 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds missing supported Tx multi-segs offloading.
Fixes: 51215925a32f ("net/ixgbe: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in PF. With this patch
it can be enabled or disabled on any Rx queue in PF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Rte_flow was defined to include RSS, this patch moves ixgbe
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Fixes: 97cb466d65c9 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch fixes the mapping of user priority to traffic class
in Rx/Tx path of DCB configuration. Each DCB traffic class
should include all user priorities mapping to it in both Rx and
Tx path.
Fixes: 0807f80d35d0 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Hardware PTYPE in Rx desc will be parsed to fill mbuf's packet_type.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
See: 8f094a9ac5d7 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When Receive Side Coalescing (RSC) is not used, the RSC Disable
(RSC_DIS) filed of register Receive Filter Control Register (RFCTL)
should be set according to ixgbe datasheet.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Now that the m->next pointer and m->nb_segs is expected to be set (to
NULL and 1 respectively) after a mempool_get(), we can avoid to write them
in the Rx functions of drivers.
Only some drivers are patched, it's not an exhaustive patch. It gives
the idea to do the same in other drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Ixgbe supports to set the relative bandwidth for the TCs.
It's a global setting for the PF and all the VFs of a
physical port.
This feature provide the API to set the bandwidth.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To add a wrapper function to remove the limit of tx burst size and
implement the "make an best effort to transmit the pkts" policy.
The patch makes ixgbe vec function work in a consistent behavior
like ixgbe_xmit_pkts_simple and ixgbe_xmit_pkts do that.
Cc: Helin Zhang <helin.zhang@intel.com>
Cc: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
4 and 8 TCs are supported on ixgbe. By default there're
8 TCs. So when initializing the device, the bandwidth for
8 TCs is set.
When changing the TC number, it's only considered setting
the bandwidth for 4 TCs. If the user change the number
from 4 to 8, the TCs' bandwidth is not right.
Fixes: 0807f80d35d0 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In SRIOV case, ETH_MQ_RX_VMDQ_DCB and ETH_MQ_RX_DCB should be considered as
the same meaning, due to the multi-queue mapping is the same SRIOV and VMDq
in ixgbe.
Fixes: 27b609cbd1c6 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
DCB is split to RX and TX mode. All-queues-drop is set for TX mode.
It's not appropriate because all-queue-drop is a RX feature.
Move this setting from TX to RX.
Fixes: f3f9b17bb8a5 ("net/ixgbe: support multiqueue mode VMDq DCB with SRIOV")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The check of queue_id is done in all drivers implementing
rte_eth_rx_queue_count(). Factorize this check in the generic function.
Note that the nfp driver was doing the check differently, which could
induce crashes if the queue index was too big.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
To get better performance, Rx bulk alloc recv function will scan 8 descs
in one time, but the statuses are not consistent on ARM platform because
the memory allocated for Rx descriptors is cacheable hugepages.
This patch is to calculate the number of received packets by scan DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: 7431041062b9 ("ixgbe: allow rx bulk alloc")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Helin Zhang <helin.zhang@intel.com>
CC: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The only reason why bulk alloc disabled for the rings with
more than (IXGBE_MAX_RING_DESC - RTE_PMD_IXGBE_RX_MAX_BURST)
descriptors is the possible out-of-bound access to the dma
memory. But it's the artificial limit and can be easily
avoided by allocating of RTE_PMD_IXGBE_RX_MAX_BURST more
descriptors in memory. This will not interfere the HW and,
as soon as all rings' memory zeroized, Rx functions will
work correctly.
This change allows to use vectorized Rx functions with
4096 descriptors in Rx ring which is important to achieve
zero packet drop rate in high-load installations.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
MACsec (or LinkSec, 802.1AE) is a MAC level encryption/authentication
scheme defined in IEEE 802.1AE that uses symmetric cryptography.
This commit adds the MACsec offload support for ixgbe.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Allow Data Center Bridge (DCB) configuration when SRIOV is enabled.
Signed-off-by: Rahul R Shah <rahul.r.shah@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add CKSUM_GOOD flag to distinguish a good checksum from an unknown one.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
ixgbe PMD RX function(s) misses some packet types that are:
- correctly recognised by the underlying HW.
- marked as supported by ixgbe_dev_supported_ptypes_get().
Fixes: 9586ebd358d5 ("ixgbe: replace some offload flags with packet type")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Olivier Matz <olivier.matz@6wind.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The masking for the RX/TX enable bit was incorrect in the rx and tx
queue stop functions. Instead of using "& MASK" it used "| MASK" which
would always return true. This error was found by converity scan.
CID 13215 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: txdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
CID 13216 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: rxdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
Coverity issue: 13215
Coverity issue: 13216
Fixes: 029fd06d40fa ("ixgbe: queue start and stop")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Run ixgbe driver through checkpatch and fix the issues highlighted
Fix line spacing, some bad indentation, and in a couple
of cases use short circuit (already there) return to lessen indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Applied with four additional fixes for issues highlighted by checkpatch
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
VxLAN & NVGRE are supported by x550. As we know HW can parse
the packet and tell SW the type info. For VxLAN & NVGRE packets
there's some change. HW will not tell SW the info of the outer
header but the inner header instead. But we always take the
info as it's for the outer header. So the packet type info is
not right when x550 receives VxLAN & NVGRE packets.
As x550 only supports IPv4 VxLAN & NVGRE packets, we can tell
the outer header of VxLAN is IPv4 + UDP, and the outer header
of NVGRE is IPv4 only. What we don't know is if there's
optional field in the outer IPv4 header.
This patch implement the support of packet type for VxLAN &
NVGRE. And it fixes the wrong packet type issue either.
BTW:
It doesn't fix any existing commit as although it resolve an
issue it's more like a new feature but not a fix.
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Silence a compiler warning that this variable may be used uninitialized.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
