Building OVS with dpdk, sparse complains about 64-bit constant being
passed as a normal integer that can't fit it:
error: constant 0xffffffffffffffff is so big it is unsigned long
Fixes: ecbc857013 ("ethdev: add PFCP header to flow API")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Using a global mbuf dynamic field for metadata incurs some
performance penalty on a datapath. Store this information in
the Rx queue descriptor for a better cache locality.
Fixes: a18ac61133 ("net/mlx5: add metadata support to Rx datapath")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Defines some new RSS offload types for ETH/S_VLAN/C_VLAN/L2TPV3/
/PFCP/L2_SRC_ONLY/L2_DST_ONLY.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add the previous prototype for the 'profile_hook_rx_burst_cb' function
to fix the compiler warning when the DPDK is built with
'RTE_ETHDEV_PROFILE_WITH_VTUNE' config option enabled:
/home/dpdk/lib/librte_ethdev/ethdev_profile.c:17:1: warning:
no previous prototype for profile_hook_rx_burst_cb [-Wmissing-prototypes]
Fixes: 2c1bbab7f0 ("ethdev: change vtune profiling approach")
Cc: stable@dpdk.org
Signed-off-by: Eugeny Parshutin <eugeny.parshutin@linux.intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add tracepoints at important and mandatory APIs for tracing support.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Minor spelling errors found by aspell and codespell
Fixes: 1daa338058 ("ethdev: validate offloads set by PMD")
Fixes: 81f9db8ecc ("ethdev: add vlan offload support")
Fixes: c8231c63dd ("ethdev: insert Rx callback as head of list")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_PFCP to flow API to
match a PFCP header.
Add sample PFCP rules for testpmd guide. Since Session Endpoint
Identifier (SEID) only will be present in PFCP Session header and PFCP
Session headers shall be identified when the S field is equal to 1, when
create rules for PFCP Session header with certain SEID the S field need
be set 1.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch adds top level SPDX license identifiers for some of the DPDK
source and scripts, where the copyright owners have not yet agreed to
replace the full BSD-3 license plate.
This patch also add SPDX license tag for a file with no
previous license plates. (DPDK is BSD-3)
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If a function is added to the eth_dev_ops struct before
tx_descriptor_status function, this will cause ABI breakage. This is due
to static inline functions using this function, and some other functions
above it in the struct, so they cannot change position. A comment is
added to inform developers of this possible breakage.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The rte_security API which enables inline protocol/crypto feature
mandates that for every security session an rte_flow is created. This
would internally translate to a rule in the hardware which would do
packet classification.
In rte_security, one SA would be one security session. And if an rte_flow
need to be created for every session, the number of SAs supported by an
inline implementation would be limited by the number of rte_flows the
PMD would be able to support.
If the fields SPI & IP addresses are allowed to be a range, then this
limitation can be overcome. Multiple flows will be able to use one rule
for SECURITY processing. In this case, the security session provided as
conf would be NULL.
Application should do an rte_flow_validate() to make sure the flow is
supported on the PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Introduce an API which dump the device's internal representation
information of rte flows in hardware.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Avoid overwriting device flags and other information in device
data stored in shared memory when a secondary process
probes PCI device.
Fixes: 494adb7f63 ("ethdev: add device fields from PCI layer")
Cc: stable@dpdk.org
Signed-off-by: Fang TongHao <fangtonghao@sangfor.com.cn>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is a potential problem that changing the content of
dev->data->dev_conf.rxmode.offloads even when there is no
vlan_offload_set driver callback.
It is a good idea that prevent the side effect and make the API return
success if no change requested. This patch fixes the problem, the detail
information as below:
- keep possibility to do dummy set even if there is no driver callback
- do not touch Rx mode offloads in device data before checking the
driver callback availability
- ensure that Rx mode offloads are rolled back correctly if driver
callback returns error
Fixes: 81f9db8ecc ("ethdev: add vlan offload support")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The maximum amount of unique swutching domain is supposed
to be equal RTE_MAX_ETHPORTS. Current implementation allows
to allocate only RTE_MAX_ETHPORTS-1 domains.
The definition of RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID is
changed from 0 to UINT16_MAX, the rte_eth_dev_info_get is
updated to initialize dev_ibfo structure accordingly.
Fixes: ce92504063 ("ethdev: add switch domain allocator")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_L2TPV3OIP to
flow API to match a L2TPv3 over IP header. This patch supports only
L2TPv3 over IP header format which is different to L2TPv2/L2TPv3
over UDP. The difference in header formats between L2TPv3 over IP
and L2TP over UDP require a separate implementation for each.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
The function was checking -1 against the callback data instead of
the given cb_arg parameter.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ricardo Roldan <rroldan@bequant.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For some overlay network, such as VXLAN, the DSCP field in the new outer
IP header after VXLAN decapsulation may need to be updated accordingly.
This commit introduce the DSCP modify action for IPv4 and IPv6.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
Missing asterisk so that comment is not seen by doxygen.
Fixes: 9a2f44c762 ("ethdev: add flow tag")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
A buffer overflow happens in testpmd with some drivers
since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
The advertised capabilities of mlx4, mlx5 and softnic
for the number of queues were the maximum number: UINT16_MAX.
They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
that applications expect to be respected.
The limitation is applied at ethdev level (function rte_eth_dev_info_get),
in order to force the configured limit for all drivers.
Fixes: 14b53e27b3 ("ethdev: fix crash with multiprocess")
Cc: stable@dpdk.org
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When the last item in flow pattern includes "next protocol" field which
is relevant for RSS flow expansion, a new item is added to the pattern
according to the "next protocol" field. This field is called missed
field.
The missed field wrongly was not initialized what caused to some of the
flow item fields to contain garbage values.
As a result, the PMDs internal flow engine may crash.
For example, the spec value may include garbage pointer and to cause
crash.
Initialize the missed field with zeroes.
Fixes: fc2dd8dd49 ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
memcpy() source and destination areas must not overlap and equal
pointers is the case which is really met, so handle it.
Fixes: 68b931bff2 ("ethdev: eliminate interim variable")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Avoid usaged of "failed" in the message about not requested but
enabled offload, since it is not a failure.
Fixes: 1daa338058 ("ethdev: validate offloads set by PMD")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Right now a PMD decides if it is critical that an offload cannot
be disabled (i.e. not requested, but still enabled). If PMD treaks
it as OK, we should not spam logs with corresponding messages
by default. Default log level in ethdev is INFO, so change the
message level to DEBUG.
Fixes: 1daa338058 ("ethdev: validate offloads set by PMD")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Fix missing new line token at the end of log.
Fixes: 5d30897295 ("ethdev: add mbuf RSS update as an offload")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is a rte_flow API which expands a RSS flow pattern to multiple
patterns according to the RSS hash types in the RSS action
configuration.
As part of the expansion, detection of the last item of the flow uses
the "next proto" field of the last configured item in the pattern list.
Wrongly, the mask of this field was not considered in order to validate
the field.
Ignore "next proto" fields when their corresponded masks invalidate them.
Fixes: fc2dd8dd49 ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch implements API for configuration and
validation of max size for LRO aggregated packet.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In order to allow smooth addition of features without breaking
ABI compatibility, some space is reserved in several core structs
of ethdev API.
The struct rte_eth_dev and rte_eth_dev_data are supposed
to be used internally only, but there is a chance that
increasing their size would break ABI for some applications.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some PMDs cannot work when certain offloads are enable/disabled, as a
workaround PMDs auto enable/disable offloads internally and expose it
through dev->data->dev_conf.rxmode.offloads.
After device specific dev_configure is called compare the requested
offloads to the offloads exposed by the PMD and, if the PMD failed
to enable a given offload then log it and return -EINVAL from
rte_eth_dev_configure, else if the PMD failed to disable a given offload
log and continue with rte_eth_dev_configure.
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_flow_expand_rss expands rte_flow item list based on the RSS
types. In another word, some additional rules are added if the user
specified items are not complete enough according to the RSS type,
for example:
... pattern eth / end actions rss type tcp end ...
User only provides item eth but want to do RSS on tcp traffic.
The pattern is not complete enough to filter TCP traffic only.
This will be a problem for some HWs.
So some PMDs use rte_flow_expand_rss to expand above user provided
flow to:
... pattern eth / end actions rss types tcp
... pattern eth / ipv4 / tcp / end actions rss types tcp ...
... pattern eth / ipv6 / tcp / end actions rss types tcp ...
in order to filter TCP traffic only and do RSS correctly.
However the current expansion cannot handle pattern as below, which
provides ethertype or ip next proto instead of providing an item:
... pattern eth type is 0x86DD / end actions rss types tcp ...
rte_flow_expand_rss will expand above flow to:
... pattern eth type is 0x86DD / ipv4 / tcp end ...
which has conflicting values: 0x86DD vs. ipv4 and some HWs will refuse
to create flow.
This patch will fix above by checking the last item's spec and to
expand RSS flows correctly.
Currently only support to complete item list based on ether type or ip
next proto.
Fixes: 4ed05fcd44 ("ethdev: add flow API to expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Currently, metadata can be set on egress path via mbuf tx_metadata field
with PKT_TX_METADATA flag and RTE_FLOW_ITEM_TYPE_META matches metadata.
This patch extends the metadata feature usability.
1) RTE_FLOW_ACTION_TYPE_SET_META
When supporting multiple tables, Tx metadata can also be set by a rule and
matched by another rule. This new action allows metadata to be set as a
result of flow match.
2) Metadata on ingress
There's also need to support metadata on ingress. Metadata can be set by
SET_META action and matched by META item like Tx. The final value set by
the action will be delivered to application via metadata dynamic field of
mbuf which can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_RX_DYNF_METADATA flag will be set along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior to use SET_META action.
The availability of dynamic mbuf metadata field can be checked
with rte_flow_dynf_metadata_avail() routine.
If application is going to engage the metadata feature it registers
the metadata dynamic fields, then PMD checks the metadata field
availability and handles the appropriate fields in datapath.
For loopback/hairpin packet, metadata set on Rx/Tx may or may not be
propagated to the other path depending on hardware capability.
MARK and METADATA look similar and might operate in similar way,
but not interacting.
Initially, there were proposed two metadata related actions:
- RTE_FLOW_ACTION_TYPE_FLAG
- RTE_FLOW_ACTION_TYPE_MARK
These actions set the special flag in the packet metadata, MARK action
stores some specified value in the metadata storage, and, on the packet
receiving PMD puts the flag and value to the mbuf and applications can
see the packet was threated inside flow engine according to the appropriate
RTE flow(s). MARK and FLAG are like some kind of gateway to transfer some
per-packet information from the flow engine to the application via
receiving datapath. Also, there is the item of type RTE_FLOW_ITEM_TYPE_MARK
provided. It allows us to extend the flow match pattern with the capability
to match the metadata values set by MARK/FLAG actions on other flows.
From the datapath point of view, the MARK and FLAG are related to the
receiving side only. It would useful to have the same gateway on the
transmitting side and there was the feature of type RTE_FLOW_ITEM_TYPE_META
was proposed. The application can fill the field in mbuf and this value
will be transferred to some field in the packet metadata inside the flow
engine. It did not matter whether these metadata fields are shared because
of MARK and META items belonged to different domains (receiving and
transmitting) and could be vendor-specific.
So far, so good, DPDK proposes some entities to control metadata inside
the flow engine and gateways to exchange these values on a per-packet basis
via datapaths.
As we can see, the MARK and META means are not symmetric, there is absent
action which would allow us to set META value on the transmitting path.
So, the action of type:
- RTE_FLOW_ACTION_TYPE_SET_META was proposed.
The next, applications raise the new requirements for packet metadata.
The flow ngines are getting more complex, internal switches are introduced,
multiple ports might be supported within the same flow engine namespace.
From the DPDK points of view, it means the packets might be sent on one
eth_dev port and received on the other one, and the packet path inside
the flow engine entirely belongs to the same hardware device. The simplest
example is SR-IOV with PF, VFs and the representors. And there is a
brilliant opportunity to provide some out-of-band channel to transfer
some extra data from one port to another one, besides the packet data
itself. And applications would like to use this opportunity.
It is supposed for application to use trials (with rte_flow_validate)
to detect which metadata features (FLAG, MARK, META) actually supported
by PMD and underlying hardware. It might depend on PMD configuration,
system software, hardware settings, etc., and should be detected
in run time.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68c ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c21 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
A tag is a transient data which can be used during flow match. This can be
used to store match result from a previous table so that the same pattern
need not be matched again on the next table. Even if outer header is
decapsulated on the previous match, the match result can be kept.
Some device expose internal registers of its flow processing pipeline and
those registers are quite useful for stateful connection tracking as it
keeps status of flow matching. Multiple tags are supported by specifying
index.
Example testpmd commands are:
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xaa00bb mask 0xffff00ff /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xcc00 mask 0xff00 /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xaa00bb value mask 0xffff00ff /
eth ... / end
actions ... jump group 2 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xcc00 value mask 0xff00 /
tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
flow create 0 ingress group 2
pattern tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69fe ("ethdev: deprecate port count function").
It was planned to be removed after 19.11 LTS release,
but given we must not break ABI between 19.11 and 20.11,
it is removed now.
Note the ABI version is not dumped in this commit
because other changes already did.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This commit introduce hairpin queue type.
The hairpin queue in build from Rx queue binded to Tx queue.
It is used to offload traffic coming from the wire and redirect it back
to the wire.
There are 3 new functions:
- rte_eth_dev_hairpin_capability_get
- rte_eth_rx_hairpin_queue_setup
- rte_eth_tx_hairpin_queue_setup
In order to use the queue, there is a need to create rte_flow
with queue / RSS action that targets one or more of the Rx queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The queue state defines are internal to the DPDK.
This commit moves them to a private header file.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some of the internal header files have 'rte_' prefix
and some don't.
Remove 'rte_' prefix from all internal header files.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Let's stick to the current model of per library ABI version until the
new model is in place.
The ABI changed in the incriminated commit.
The release notes were updated accordingly but the compiled version
number has been missed.
Fixes: 4f25d7d225 ("ethdev: add return code to device info get function")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The include for rte_ether.h in each of these files should not use
quotes, as the header file is not in the librte_ethdev directory.
These are now updated to use <> symbols, to search directories
pre-designated by the compiler.
Fixes: 57668ed7bc ("net: move ethernet definitions to the net library")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add new rte_flow_item_higig2_hdr in order to match higig2 header.
It is a layer 2.5 protocol and used in Broadcom switches.
Header format is based on the following document.
http://read.pudn.com/downloads558/doc/comm/2301468/HiGig_protocol.pdf
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The promiscuous enable and disable functions now check the
promiscuous state of the device before checking if the dev_ops
function exists for the device.
This change is necessary to allow sample applications run on
virtual PMDs, as previously -ENOTSUP returned when the promiscuous
enable function was called. This caused the sample application to
fail unnecessarily.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
