Currently we will check mempool flags when we put/get objects from
mempool. However, this makes cache useless when mempool is SC|SP,
SC|MP, MC|SP cases.
This patch makes cache available in above cases and improves performance.
Signed-off-by: Wenfeng Liu <liuwf@arraynetworks.com.cn>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Instead of passing domain, bus, devid, func, just pass
an rte_pci_addr.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
If resources were mapped prior to probe, unmap them
if probe fails.
This does not handle the case where the kernel driver was
forcibly unbound prior to probe.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Leaving default pattern item mask values up for interpretation by PMDs is
an undefined behavior that applications might find difficult to use in the
wild. It also needlessly complicates PMD implementation.
This commit addresses this by defining consistent default masks for each
item type.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Both actions share the PKT_RX_FDIR mbuf flag, as a result there is no way
to tell them apart. Moreover, the maximum allowed value for the MARK action
may not necessarily cover the entire 32-bit space.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Based on initial PMD implementations of the flow API, returning the error
structure which may be NULL is useless and always discarded.
Returning the error code instead appears to be much more convenient.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses several obvious issues reported by Coverity
with array bounds checks in functions related to the flow API.
Coverity issue: 139596, 139597, 139598, 139599
Fixes: 938a184a1870 ("app/testpmd: implement basic support for flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Coverity reports a forward null dereference from a for loop
that works with a variable previously tested for null that had no error
handling or condition to prevent it. Pretty obvious fix below.
Coverity issue: 139593
Fixes: 98b0fdb0ffc6 ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Add common vector type definitions to all CPU architectures.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Rename tools/ into usertools/ to differentiate from buildtools/
and devtools/ while making clear these scripts are part of
DPDK runtime.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The remaining scripts in the scripts/ directory are only useful
to developers. That's why devtools/ is a better name.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is already a directory buildtools for pmdinfogen used by
the build system. The scripts used in makefiles are moved here.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a requirement to support both Python 2 and 3 to the
DPDK Python Coding Standards and Getting started Guide.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Make all the DPDK Python apps work with Python 2 or 3 to
allow them to work with whatever is the system default.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Make all DPDK python application compliant with the PEP8 standard
to allow for consistency checking of patches and to allow further
refactoring.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
error #188: enumerated type mixed with another type
This is get when an integer assigned to an enum variable.
Since this usage is common and causing many ICC compilation errors, and
other compilers accept this usage. Disabling the warning.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since all current drivers supports Tx preparation API, it is used
in csum forwarding engine by default for all drivers.
Adding additional step to the csum engine costs about 3-4% of performance
drop, on my setup with ixgbe driver. It's caused mostly by the need
of reaccessing and modification of packet data.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added API for `rte_eth_tx_prepare`
uint16_t rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
Added fields to the `struct rte_eth_desc_lim`:
uint16_t nb_seg_max;
/**< Max number of segments per whole packet. */
uint16_t nb_mtu_seg_max;
/**< Max number of segments per one MTU */
These fields can be used to create valid packets according to the
following rules:
* For non-TSO packet, a single transmit packet may span up to
"nb_mtu_seg_max" buffers.
* For TSO packet the total number of data descriptors is "nb_seg_max",
and each segment within the TSO may span up to "nb_mtu_seg_max".
Added functions:
int
rte_validate_tx_offload(struct rte_mbuf *m)
to validate general requirements for tx offload set in mbuf of packet
such a flag completness. In current implementation this function is
called optionaly when RTE_LIBRTE_ETHDEV_DEBUG is enabled.
int rte_net_intel_cksum_prepare(struct rte_mbuf *m)
to prepare pseudo header checksum for TSO and non-TSO tcp/udp packets
before hardware tx checksum offload.
- for non-TSO tcp/udp packets full pseudo-header checksum is
counted and set.
- for TSO the IP payload length is not included.
int
rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
this function uses same logic as rte_net_intel_cksum_prepare, but
allows application to choose which offloads should be taken into
account, if full preparation is not required.
PERFORMANCE TESTS
-----------------
This feature was tested with modified csum engine from test-pmd.
The packet checksum preparation was moved from application to Tx
preparation step placed before burst.
We may expect some overhead costs caused by:
1) using additional callback before burst,
2) rescanning burst,
3) additional condition checking (packet validation),
4) worse optimization (e.g. packet data access, etc.)
We tested it using ixgbe Tx preparation implementation with some parts
disabled to have comparable information about the impact of different
parts of implementation.
IMPACT:
1) For unimplemented Tx preparation callback the performance impact is
negligible,
2) For packet condition check without checksum modifications (nb_segs,
available offloads, etc.) is 14626628/14252168 (~2.62% drop),
3) Full support in ixgbe driver (point 2 + packet checksum
initialization) is 14060924/13588094 (~3.48% drop)
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The function rte_eth_xstats_get() return an array of tuples (id,
value). The value is the statistic counter, while the id references a
name in the array returned by rte_eth_xstats_get_name().
Today, each 'id' returned by rte_eth_xstats_get() is equal to the index
in the returned array, making this value useless. It also prevents a
driver from having different indexes for names and value, like in the
example below:
rte_eth_xstats_get_name() returns:
0: "rx0_stat"
1: "rx1_stat"
2: ...
7: "rx7_stat"
8: "tx0_stat"
9: "tx1_stat"
...
15: "tx7_stat"
rte_eth_xstats_get() returns:
0: id=0, val=<stat> ("rx0_stat")
1: id=1, val=<stat> ("rx1_stat")
2: id=8, val=<stat> ("tx0_stat")
3: id=9, val=<stat> ("tx1_stat")
This patch fixes the drivers to set the 'id' in their ethdev->xstats_get()
(except e1000 which was already doing it), and fixes ethdev by not setting
the 'id' field to the index of the table for pmd-specific stats: instead,
they should just be shifted by the max number of generic statistics.
Fixes: bd6aa172cf35 ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The struct rte_intr_handle is an abstraction layer for different types of
interrupt mechanisms. It is embedded in the low-level device (e.g. PCI).
On allocation of a struct rte_eth_dev a reference to the intr_handle
should be stored for devices supporting interrupts.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This changes the driver to handle the PCI resource directly instead
of repeatedly going through eth_dev.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Use device private information to minimize the places that assume eth_dev
contains pci_dev.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
We don't need to depend on rte_eth_dev->pci_dev to differentiate between
the virtio_user and the virtio_pci case. Instead we can use the private
virtio_hw struct to get that information.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This adds a helper to get the rte_intr_handle from the virtio_hw. This is
safe to do since the usage of the helper is guarded by RTE_ETH_DEV_INTR_LSC
which is only set if we found a PCI device during initialization.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This is overwritten in rte_eth_dev_info_get().
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Use existing information about pci and interrupt handle to minimize
the number of places that assume eth_dev contains pci_device
information.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Since later changes will change where PCI information is,
localize mapping in one macro.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Create one macro for where PCI device information is extracted
from ethernet device. Makes later changes easier to review, and test.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Since rte_eth_dev_info_get does memset() on dev_info before
calling device specific code, the explicit assignment of NULL
in all these virtual drivers has no effect.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
The info in rte_device about driver is immutable and
shouldn't change.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Both register/unregister and enable/disable don't necessarily require the
rte_intr_handle to be modifiable. Therefore lets constify it.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
This macro is based on Jan Viktorin's original patch but also checks the
type of the passed pointer against the type of the member.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
[jblunck@infradead.org: add type checking and __extension__]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
A missing include causes the following compilation errors:
error: use of undeclared identifier 'AF_INET'
error: use of undeclared identifier 'AF_INET6'
Fixes: ef6e38550f07 ("app/testpmd: add items ipv4/ipv6 to flow command")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
