In next 18.05 the old hw offload API will be removed. This patch adds
support for just the new hw offload API.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PF PMD support was based on NSPU interface. This patch changes the
PMD for using the new CPP user space interface which gives more
flexibility for adding new functionalities.
This change just affects initialization with the datapath being the
same than before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
CPP refers to the internal NFP Command Push Pull bus. This patch allows
to create CPP commands from user space allowing to access any single
part of the chip.
This CPP interface is the base for having other functionalities like
mutexes when accessing specific chip components, chip resources management,
firmware upload or using the NSP, an embedded arm processor which can
perform tasks on demand.
NSP was the previous only way for doing things in the chip by the PMD,
where a NSPU interface was used for commands like firmware upload or
port link configuration. CPP interface supersedes NSPU, but it is still
possible to use NSP through CPP.
CPP interface adds a great flexibility for doing things like extended
stats or firmware debugging.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
For fscanf() function SCN macros should be used but PRI macros were
wrongly used.
Also use correct sizes of variables for read values.
Fixes: 83556fd2c0fc ("szedata2: change to physical device type")
Cc: stable@dpdk.org
Signed-off-by: Matej Vido <vido@cesnet.cz>
Previously the queues were the part of private data structure of the
Ethernet device.
Now the queues are allocated at setup thus numa-aware allocation is
possible.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Counters from all queues have to be summed up for total stats
even though the number of queue stats counters is not sufficient.
Fixes: 83556fd2c0fc ("szedata2: change to physical device type")
Cc: stable@dpdk.org
Signed-off-by: Matej Vido <vido@cesnet.cz>
There are several error paths where the bonding device may not start.
Clear dev_started before we return if we take one of these paths.
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
The pos returned is just the offset of the slab. You need to use this
to offset the bits in the slab.
Fixes: c771e4ef38 ("net/bonding: enable slave VLAN filter")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
This is fix for Coverity Defect 268319 about uninitialized speed
in an error case. Also drop unnecessary assignment.
Coverity issue: 268319
Fixes: 4fac7c0a147e ("net/octeontx: add link update")
CC: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Update to new Rx/Tx offload API. Always set CRC stripping during
configuration, since it can't be disabled.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Offload API is currently used only to setup correct receive function
for scattered packets.
Use offloads member instead of bitfield and advertise correct
capabilities.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Update the license header on bnxt files to be the standard
BSD-3-Clause license used for the rest of DPDK,
bring the files in compliance with the DPDK licensing policy.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Use the new Rx/Tx offload APIs and remove the old style offloads.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
In Enhanced Multi-Packet Send (eMPW), entire packet data is prefetched to
LLC if it isn't inlined. Even though this helps reducing jitter when HW
fetches data by DMA, this can thresh the LLC with evicting precious data.
And if the size of queue is large and there are many queues, this might not
be effective. Also, if application runs on a remote node from the PCIe
link, it may not be helpful and can even cause bad results.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
According to CQE format:
- l4_hdr_type:
0 - None
1 - TCP header was present in the packet
2 - UDP header was present in the packet
3 - TCP header was present in the packet with Empty
TCP ACK indication. (TCP packet <ACK> flag is set,
and packet carries no data)
4 - TCP header was present in the packet with TCP ACK indication.
(TCP packet <ACK> flag is set, and packet carries data).
A packet should be identified as TCP packet if l4_hdr_type is 1, 3 or 4.
Add corresponding idx of TCP ACK to ptype table.
previous discussion:
https://www.mail-archive.com/users@dpdk.org/msg02980.html
Signed-off-by: Bin Huang <bin.huang@hxt-semitech.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When linking the mlx glue code libraries using CC, the linker arguments in
LDFLAGS are not prefixed with -Wl. [The EXTRA_LDFLAGS are though.] This
leads to warning messages on build:
clang-5.0: warning: argument unused during compilation: '-e xport-dynamic'
Fix this by checking for $LINK_USING_CC in the Makefiles and prefixing the
LDFLAGS appropriately if set.
Fixes: 27cea11686ff ("net/mlx4: spawn rdma-core dependency plug-in")
Fixes: 59b91bec12c6 ("net/mlx5: spawn rdma-core dependency plug-in")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Vlan tci configuration from testpmd is stored in big endian, changing
it to little endian is needed before using it.
Fixes: ecad87d22383 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in VF. With this patch
it can be enabled or disabled on any Rx queue in VF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in PF. With this patch
it can be enabled or disabled on any Rx queue in PF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Rx and Tx offloads API.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
This commit support the new Rx and Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
virtio-user port_id range should be increased from 8 bits to 16 bits.
Fixes: f8244c6399d9 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Instead of llX, use C99 standard "PRIu64" in format specifier. Former one
breaks compile in ppc64le.
Fixes: c2c167fdb3 ("bus/fslmc: support memory event callbacks for VFIO")
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch moves some of the internal vfio functions from
eal_vfio.h to rte_vfio.h for common uses with "rte_" prefix.
This patch also change the FSLMC bus usages from the internal
VFIO functions to external ones with "rte_" prefix
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In case of Receive from Ethernet we add a new pull request (prefetch)
but do not fetch the results from that pull request until next
dequeue operation. This keeps the portal in busy mode.
This patch updates the portals bifurcation to have separate portals
to receive packets for Ethernet and all other devices to use a
common portal.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
VFIO needs to map and unmap segments for DMA whenever they
become available or unavailable, so register a callback for
memory events, and provide map/unmap functions.
Remove unneeded check for number of segments, as in non-legacy
mode this now becomes a valid scenario.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
fslmc bus needs to map all allocated memory for VFIO before
device probe. This bus doesn't support hotplug, so at the time
of this call, all possible device that could be present, are
present. This will also be the place where we install VFIO
callback, although this change will come in the next patch.
Since rte_fslmc_vfio_dmamap() is now only called at bus probe,
there is no longer any need to check if DMA mappings have been
already done.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
