Check the FILE *f and rte_mempool *mp pointers for NULL.
Signed-off-by: Keith Wiles <keith.wiles@windriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
The HPET support in the BSD EAL was copied directly from the Linux version,
but did not actually work on FreeBSD. We replace this old code with a simple
compiler message that informs the user that we don't support HPET on BSD if
they enable such support in the build-time configuration file.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
RTE_ARCH_X86_64 can not be used as a way to determine if we are building for
64bits cpus. Instead, RTE_ARCH_64 should be used.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Handle the RTE_ETH_FILTER_ADD and RTE_ETH_FILTER_DELETE operations
on ethertype filter.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
A new structure of ethertype filter is defined in rte_eth_ctrl.h
for filter_ctrl api
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: enable for BSD - not tested]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
VNIC common code is partially shared with ENIC kernel mode driver.
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch fixes compiling problems on IBM Power architecture and turn
on the test-pmd compiling option in configuration file. Actually, this
is an big endian compiling fix.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Curent implementation in test_memzone.c has bugs in finding the
second smallest memory segment. It's the last smallest memory segment,
but it's not the second smallest memory segment. This bug may cause test
failure in some cases. This patch fixes this bug.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The mmap of hugepage files on IBM Power starts from high address to low
address. This is different from x86. This patch modified the memory
segment detection code to get the correct memory segment layout on Power
architecture. This patch also added a commond ARCH_PPC_64 definition for
64 bit systems.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power architecture has different huge page sizes (16MB, 16GB) than
x86.This patch defines RTE_PGSIZE_16M and RTE_PGSIZE_16G in the
rte_page_sizes enum variable and adds huge page size support of DPDK
for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power architecture has different cache line size (128 bytes) than
x86 (64 bytes). This patch defines CACHE_LINE_SIZE to 128 bytes to
override the default value 64 bytes to support IBM Power Architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
iopl() call is mostly for the i386 architecture. In Power and other
architecture, it doesn't exist. This patch modified rte_eal_iopl_init()
and make it return -1 for Power and other architecture. Thus
rte_config.flags will not contain EAL_FLG_HIGH_IOPL flag for other
architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power processor doesn't have CPU flag hardware registers. This patch
uses aux vector software register to get CPU flags and add CPU flag
checking support for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The SSE based memory copy in DPDK only support x86. This patch adds
altivec based memory copy functions for IBM Power architecture. This
patch includes altivec.h which requires GCC version>= 4.8.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch adds spinlock operations for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch add architecture specific prefetch operations for IBM Power
architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power architecture doesn't have TSC register to get CPU cycles. This
patch implements the time base register read instead of TSC register of
x86 on IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch adds architecture specific byte order operations for IBM Power
architecture. Power architecture support both big endian and little
endian. This patch also adds a RTE_ARCH_BIG_ENDIAN micro.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch adds architecture specific atomic operation file for IBM
Power architecture CPU.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
To make DPDK run on IBM Power architecture, configuration files for
Power architecuture are added. Also, the compiling related .mk files are
added.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
If the user specifies 'set verbose 1' in testpmd command line,
the csum forward engine will dump some informations about received
and transmitted packets, especially which flags are set and what
values are assigned to l2_len, l3_len, l4_len and tso_segsz.
This can help someone implementing TSO or hardware checksum offload to
understand how to configure the mbufs.
Example of output for one packet:
--------------
rx: l2_len=14 ethertype=800 l3_len=20 l4_proto=6 l4_len=20
tx: m->l2_len=14 m->l3_len=20 m->l4_len=20
tx: m->tso_segsz=800
tx: flags=PKT_TX_IP_CKSUM PKT_TX_TCP_SEG
--------------
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add two new commands in testpmd:
- tso set <segsize> <portid>
- tso show <portid>
These commands can be used enable TSO when transmitting TCP packets in
the csum forward engine. Ex:
set fwd csum
tx_checksum set ip hw 0
tso set 800 0
start
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Implement TSO (TCP segmentation offload) in ixgbe driver. The driver is
now able to use PKT_TX_TCP_SEG mbuf flag and mbuf hardware offload infos
(l2_len, l3_len, l4_len, tso_segsz) to configure the hardware support of
TCP segmentation.
In ixgbe, when doing TSO, the IP length must not be included in the TCP
pseudo header checksum. A new function ixgbe_fix_tcp_phdr_cksum() is
used to fix the pseudo header checksum of the packet before giving it to
the hardware.
In the patch, the tx_desc_cksum_flags_to_olinfo() and
tx_desc_ol_flags_to_cmdtype() functions have been reworked to make them
clearer. This should not impact performance as gcc (version 4.8 in my
case) is smart enough to convert the tests into a code that does not
contain any branch instruction.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Some of the NICs supported by DPDK have a possibility to accelerate TCP
traffic by using segmentation offload. The application prepares a packet
with valid TCP header with size up to 64K and deleguates the
segmentation to the NIC.
Implement the generic part of TCP segmentation offload in rte_mbuf. It
introduces 2 new fields in rte_mbuf: l4_len (length of L4 header in bytes)
and tso_segsz (MSS of packets).
To delegate the TCP segmentation to the hardware, the user has to:
- set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
PKT_TX_TCP_CKSUM)
- set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- set PKT_TX_IP_CKSUM if it's IPv4, and set the IP checksum to 0 in
the packet
- fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- calculate the pseudo header checksum without taking ip_len in account,
and set it in the TCP header, for instance by using
rte_ipv4_phdr_cksum(ip_hdr, ol_flags)
The API is inspired from ixgbe hardware (the next commit adds the
support for ixgbe), but it seems generic enough to be used for other
hw/drivers in the future.
This commit also reworks the way l2_len and l3_len are used in igb
and ixgbe drivers as the l2_l3_len is not available anymore in mbuf.
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce new functions to calculate checksums. These new functions
are derivated from the ones provided csumonly.c but slightly reworked.
There is still some room for future optimization of these functions
(maybe SSE/AVX, ...).
This API will be modified in tbe next commits by the introduction of
TSO that requires a different pseudo header checksum to be set in the
packet.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The csum forward engine was becoming too complex to be used and
extended (the next commits want to add the support of TSO):
- no explaination about what the code does
- code is not factorized, lots of code duplicated, especially between
ipv4/ipv6
- user command line api: use of bitmasks that need to be calculated by
the user
- the user flags don't have the same semantic:
- for legacy IP/UDP/TCP/SCTP, it selects software or hardware checksum
- for other (vxlan), it selects between hardware checksum or no
checksum
- the code relies too much on flags set by the driver without software
alternative (ex: PKT_RX_TUNNEL_IPV4_HDR). It is nice to be able to
compare a software implementation with the hardware offload.
This commit tries to fix these issues, and provide a simple definition
of what is done by the forward engine:
* Receive a burst of packets, and for supported packet types:
* - modify the IPs
* - reprocess the checksum in SW or HW, depending on testpmd command line
* configuration
* Then packets are transmitted on the output port.
*
* Supported packets are:
* Ether / (vlan) / IP|IP6 / UDP|TCP|SCTP .
* Ether / (vlan) / IP|IP6 / UDP / VxLAN / Ether / IP|IP6 / UDP|TCP|SCTP
*
* The network parser supposes that the packet is contiguous, which may
* not be the case in real life.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
In testpmd the rte_port->tx_ol_flags flag was used in 2 incompatible
manners:
- sometimes used with testpmd specific flags (0xff for checksums, and
bit 11 for vlan)
- sometimes assigned to m->ol_flags directly, which is wrong in case
of checksum flags
This commit replaces the hardcoded values by named definitions, which
are not compatible with mbuf flags. The testpmd forward engines are
fixed to use the flags properly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In test-pmd (rxonly.c), the code is able to dump the list of ol_flags.
The issue is that the list of flags in the application has to be
synchronized with the flags defined in rte_mbuf.h.
This patch introduces 2 new functions rte_get_rx_ol_flag_name()
and rte_get_tx_ol_flag_name() that returns the name of a flag from
its mask. It also fixes rxonly.c to use this new functions and to
display the proper flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This definition is specific to Intel PMD drivers and its definition
"indicate what bits required for building TX context" shows that it
should not be in the generic rte_mbuf.h but in the PMD driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Describe how to use hardware checksum API.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The tx mbuf flags are now ordered from the lowest value to the
the highest. Add comments to explain where to add new flags.
By the way, move the PKT_TX_VXLAN_CKSUM at the right place.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since commit 4332beee9 "mbuf: expand ol_flags field to 64-bits", the
packet flags are now 64 bits wide. Some occurences were forgotten in
the ixgbe driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
According to Intel® 82599 10 GbE Controller Datasheet (Table 7-38), both
L2 and L3 lengths are needed to offload the IP checksum.
Note that the e1000 driver does not need to be patched as it already
contains the fix.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Updated the unit tests to cover both librte_power implementations as well as
the external API.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
librte_power now contains both rte_power_acpi_cpufreq and rte_power_kvm_vm
implementations.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Provides a command packet format for host and guest.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Moved the current librte_power implementation to rte_power_acpi_cpufreq, with
renaming of functions only.
Added rte_power_kvm_vm implementation to support Power Management from a VM.
librte_power now hides the implementation based on the environment used.
A new call rte_power_set_env() can explicidly set the environment, if not
called then auto-detection takes place.
rte_power_kvm_vm is subset of the librte_power APIs, the following is supported:
rte_power_init(unsigned lcore_id)
rte_power_exit(unsigned lcore_id)
rte_power_freq_up(unsigned lcore_id)
rte_power_freq_down(unsigned lcore_id)
rte_power_freq_min(unsigned lcore_id)
rte_power_freq_max(unsigned lcore_id)
The other unsupported APIs return -ENOTSUP
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Allows for the opening of Virtio-Serial devices on a VM, where a DPDK
application can send packets to the host based monitor. The packet formatted is
specified in channel_commands.h
Each device appears as a serial device in path
/dev/virtio-ports/virtio.serial.port.<agent_type>.<lcore_num> where each lcore
in a DPDK application has exclusive to a device/channel.
Each channel is opened in non-blocking mode, after a successful open a test
packet is send to the host to ensure the host side is monitoring.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
