Out of place with linear buffers is supported by octeontx
while not advertised.
Fixes: 0dc1cffa4d ("crypto/octeontx: add hardware init routine")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Ankur Dwivedi <adwivedi@marvell.com>
Update bcmfs.rst file with supported features and devices.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: JP Lee <jongpil.lee@broadcom.com>
update offload dequeue to retrieve the full ring to be
agnostic of implementation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reducing number of repetitions from 1000 to 100
to save time. Results are accurate enough with
100 loops.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
bler test results are not valid when LLR compression
is used or for loopback scenarios. Skipping these.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Replacing magic number for default wait time for hw
offload.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Run preloading explicitly for unit tests. Load each code block
by reusing existing input op then restore for the actual test.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Adding explicit check in ut that the stats counters
have the expect values.
This was identified as a gap from code coverage.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Adding explicit different ut when testing for validation
or latency (early termination enabled or not).
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Add recommendation to update to latest OpenSSL version when
using the OpenSSL PMD and to at least version 1.1.1g to avoid
known CVEs.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
RTE_LIBRTE_SECURITY_TEST never existed, the variable under this check is
never used.
Fixes: e117c18a1d ("crypto/dpaa2_sec: restructure session management")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes FIPS GCM test of the redundant plaintext string
write and insufficient test case support check for some corner
cases.
Fixes: d09abf2d10 ("examples/fips_validation: update GCM test")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch fixes the missing version line in the response file.
Fixes: 7936501840 ("examples/fips_validation: fix version compatibility")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
During crypto device probe few functions should be called only
for the primary process. This patch fixes this issue.
Fixes: 818d138bcc ("crypto/octeontx2: add init sequence in probe")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Anoob Joseph <anoobj@marvell.com>
Coverity reported dead code for a few error
checks which are indeed not reachable.
Coverity issue: 363451, 363454, 363455
Fixes: 5ad5060f8f ("baseband/acc100: add LDPC processing functions")
Fixes: f404dfe35c ("baseband/acc100: support 4G processing")
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
In q_setup() allocated memory for the queue data, we should free
it when error happens, otherwise it will lead to memory leak.
Fixes: b8cfe2c9ae ("bb/turbo_sw: add software turbo driver")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch removes information about deprecation of AES-GCM/GMAC
API for IV without J0.
Fixes: fac52fb26a ("cryptodev: add option to support both IV and J0 for GCM")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
This patch marks the old igb-uio driver as unsecure when used
with the QAT PMD and updates all examples to recommend using
VFIO-PCI instead.
It also mentions security issues with the QAT CPM and provides
information about the new VFIO-PCI parameter 'disable_denylist'
available in Linux kernels 5.9 and later.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since the built driver filenames have changed in DPDK 20.11, we need to
update the driver doc to match.
Most drivers start their section with the driver filename highlighted in
bold, while a number were missing the highlight. When updating the names,
add the markers for bold text to any missing it, so as to have things more
consistent.
Fixes: a20b2c01a7 ("build: standardize component names and defines")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previously, the Tx timestamp field and flag were registered in testpmd,
as described in mlx5 guide.
For consistency between Rx and Tx timestamps,
managing mbuf registrations inside the driver, as properly documented,
is a simpler expectation.
The only driver to support this feature (mlx5) is updated
as well as the testpmd application.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mbuf_dyn_tx_timestamp_register()
can be used to register the required field and flag.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The offload flag DEV_RX_OFFLOAD_TIMESTAMP had no documentation.
After switching to dynamic mbuf flag and field,
it becomes even more important to explicit the feature behaviour.
A doxygen comment for the timesync API was mentioning
the deprecated timestamp field, so it is also updated.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
The registration of field and flag is done in both
otx2_nix_dev_start() and otx2_nix_timesync_enable().
The dynamic offset and flag are stored in struct otx2_timesync_info
to favor cache locality.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
The dynamic offset and flag are stored in struct mlx5_rxq_data
to favor cache locality.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The functions rte_mbuf_dynfield_lookup() and rte_mbuf_dynflag_lookup()
can return an offset starting with 0 or a negative error code.
In reality the first offsets are probably reserved forever,
but for the sake of strict API compliance,
the checks which considered 0 as an error are fixed.
Fixes: efa79e68c8 ("net/mlx5: support fine grain dynamic flag")
Fixes: 3172c471b8 ("net/mlx5: prepare Tx queue structures to support timestamp")
Fixes: 0febfcce36 ("net/mlx5: prepare Tx to support scheduling")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related dynamic mbuf flag is set, although was missing previously.
The timestamp is set if configured for at least one device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced with the dynamic one.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is already a dynamic field for timestamp,
used only for Tx scheduling with the dedicated Tx offload flag.
The same field can be used for Rx timestamp filled by drivers.
A new dynamic flag is defined for Rx usage.
A new function wraps the registration of both field and Rx flag.
The type rte_mbuf_timestamp_t is defined for the API users.
After migrating all Rx timestamp usages, it will be possible
to remove the deprecated timestamp field.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This a revert of the commit 569758758d ("eventdev: add Rx timestamp").
If the Rx timestamp is not configured on the ethdev port,
there is no reason to set one.
Also the accuracy of the timestamp was bad because set at a late stage.
Anyway there is no trace of the usage of this timestamp.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Following the recent alignment of all driver names,
this new driver get unaligned:
librte_regex_octeontx2_regex.so
The 'fmt_name' must be "octeontx2_regex", and if not provided,
is taken from the 'name' variable.
But the variable 'name' should not be overwritten,
to keep the automatic value from the directory name.
The library name will be composed of the class directory
and the driver directory name:
librte_regex_octeontx2.so
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
These entry points are NO-OPS. DLB does not support
reconfiguring individual queues or ports. The entire device
must be reconfigured.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The PMD uses a public interface to allow applications to
control the token pop mode. Supported token pop modes are
as follows, and they impact core scheduling affinity for
ldb ports.
AUTO_POP: Pop the CQ tokens immediately after dequeueing.
DELAYED_POP: Pop CQ tokens after (dequeue_depth - 1) events
are released. Supported on load-balanced ports
only.
DEFERRED_POP: Pop the CQ tokens during next dequeue operation.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for eventdev stop and close entry points.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for dequeue, dequeue_burst, ...
DLB does not currently support interrupts, but instead uses
umonitor/umwait if supported by the processor. This allows
the software to monitor and wait on writes to a cache-line.
DLB supports normal and sparse cq mode. In normal mode the
hardware will pack 4 QEs into each cache line. In sparse cq
mode, the hardware will only populate one QE per cache line.
Software must be aware of the cq mode, and take the appropriate
actions, based on the mode.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for the eventdev start entry point.
DLB delays setting up single link resources until
eventdev start, because it is only then that it can
ascertain which ports have just one linked queue.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add supports for the port unlink(s) eventdev entry points.
The unlink operation is an asynchronous operation executed by
a control thread, and the unlinks-in-progress function reads
a counter shared with the control thread. Port QE and memzone
memory is freed here.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add port link entry point. Directed queues are identified and created
at this stage. Their setup deferred until link-time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Configure the load balanced (ldb) or directed (dir) port.
The consumer queue (CQ) and producer port (PP) are also
set up here.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Load balanced (ldb) queues are setup here.
Directed queues are not set up until link time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for getting the queue and port default configuration.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
