If Rx descriptors are not available, pkts are dropped by default.
Fix rx_drop_en setting in bnxt_dev_info_get_op to reflect it.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
All Netlink request the PMD will do can also be done by a iproute2 command
line interface, enabling VF behavior configuration without having to modify
the application nor reaching PMD limits (e.g. MAC address number limit).
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VF devices are not able to receive promisc or allmulti traffic unless it
fully requests it though Netlink. This will cause the request to be
processed by the PF which will handle the request and enable it.
This requires the VF to be trusted by the PF.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VF devices are not able to receive traffic unless it fully requests it
though Netlink. This will cause the request to be processed by the PF
which will add/remove the MAC address to the VF table if the VF is trusted.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
dev->data->eth_link isn't updated until the first interrupt. If a
link is carrier down, then this interrupt may never happen. Before we
finished starting the PMD, call ixgbe_dev_link_update() to ensure we
have a valid status.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If we haven't set wait_to_complete, there is no need to busy wait
until we have a link status. Applications, like bonding, use the
wait_to_complete flag to indicate that they will be doing their own
busy wait and will likely be polling again shortly.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
There need a queue index check for RSS queue region
in order to aviod error from configuration.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Based on the equivalent code in the igb driver.
Signed-off-by: Chas Williams <chas3@att.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
If running FW variant supports subvariant without checksumming
on transmit and all transmit queues do not use checksumming,
it may be disabled.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If DPDK application or OS does not need checksumming on transmit,
it may be disabled in firmware to achieve higher packet rates.
Choice must be done before VIS allocation and is allowed if
no other non-preboot and firmware subvariant-unaware drivers are
attached.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
FW subvariants allow to tweak NIC global features. For example,
if no drivers require checksumming on transmit, it may be disabled
in FW to increase packet rate.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
The change adds functional TUN PMD logic to the existing TAP PMD.
TUN PMD can be initialized with 'net_tunX' where 'X' represents unique id.
PMD supports argument interface, while MAC address and remote are not
supported.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Documentation updates including for 1400 series VIC adapters.
Remove VLAN filter from the features file as the driver does not
support that API. Hardware does support VLAN filtering, but it is not
controlled through the driver.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
1330 and 1400 series adapters support the drop action. Check for its
availability and set the necessary flag when creating NIC filters.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The enic code called from rte_eth_dev_set_mtu() was assuming that the
Rx queues are already set up via a call to rte_eth_tx_queue_setup().
OVS calls rte_eth_dev_set_mtu() before rte_eth_rx_queue_setup() and
a null pointer was dereferenced.
Fixes: c3e09182bc ("net/enic: support scatter Rx in MTU update")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Recent models support IPv4/IPv6 UDP RSS. There is no control bit to
enable UDP RSS alone. Instead, the NIC enables/disables TCP and UDP
RSS together.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The firmware on new hardware models flushes the global descriptor
cache by default. Use CMD_OPENF_IG_DESCCACHE to avoid cache
flushing. This flag has no effect on older models.
Suggested-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Supported scalar implementation for RX data path.
Supported scalar and vector implementation for TX data path.
Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>
Fix incorrect sizeof operation being used for getting mac addr size.
Found while compiling with arm64 clang.
drivers/net/tap/rte_eth_tap.c:1410:40: error: argument to 'sizeof' in
'memcpy' call is the same pointer type 'struct ether_addr *' as the
destination; expected 'struct ether_addr' or an explicit length
[-Werror,-Wsizeof-pointer-memaccess]
rte_memcpy(&pmd->eth_addr, mac_addr, sizeof(mac_addr));
~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
Fixes: bcab6c1d27 ("net/tap: allow user MAC to be passed as args")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
In next 18.05 the old hw offload API will be removed. This patch adds
support for just the new hw offload API.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
New CPP interface changes the way firmware upload is managed by
the PMD. It also supports different firmware file names for
having specific firmware applications per card.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PF PMD support was based on NSPU interface. This patch changes the
PMD for using the new CPP user space interface which gives more
flexibility for adding new functionalities.
This change just affects initialization with the datapath being the
same than before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
