With symmetric crypto producer and enabled `--fwd_latency` we will
treat rte_mbuf as perf_elt which will lead to rte_mbuf header
corruption. Use rte_mbuf data to store time stamp information.
For asymmetric add space in result data for time stamp.
Fixes: de2bc16e1b ("app/eventdev: add crypto producer mode")
Cc: stable@dpdk.org
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
For asymmetric crypto producer check for event type in
`process_crypto_request` will not pass in case of multiple stages, due
to overwrite of event type during event forward. Use producer type to
dispatch.
Fixes: 8f5b549502 ("app/eventdev: support asym ops for crypto adapter")
Cc: stable@dpdk.org
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Setup crypto adapter and add queue pairs before assigning them in
session metadata. Session metadata may use queue pair configuration
parameters, so queue pair should be added before meta assignment.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Swap min and max values to match their labels.
Fixes: 2eaa37b866 ("app/eventdev: add vector mode in pipeline test")
Cc: stable@dpdk.org
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Structure rte_cryptodev_sym_session is moved to internal
headers which are not visible to applications.
The only field which should be used by app is opaque_data.
This field can now be accessed via set/get APIs added in this
patch.
Subsequent changes in app and lib are made to compile the code.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
As per current design, rte_cryptodev_sym_session_create() and
rte_cryptodev_sym_session_init() use separate mempool objects
for a single session.
And structure rte_cryptodev_sym_session is not directly used
by the application, it may cause ABI breakage if the structure
is modified in future.
To address these two issues, the rte_cryptodev_sym_session_create
will take one mempool object that the session and session private
data are virtually/physically contiguous, and initializes both
fields. The API rte_cryptodev_sym_session_init is removed.
rte_cryptodev_sym_session_create will now return an opaque session
pointer which will be used by the app and other APIs.
In data path, opaque session pointer is attached to rte_crypto_op
and the PMD can call an internal library API to get the session
private data pointer based on the driver id.
Note: currently single session may be used by different device
drivers, given it is initialized by them. After the change the
session created by one device driver cannot be used or
reinitialized by another driver.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
Introduce ability to aggregate crypto operations processed by event
crypto adapter into single event containing rte_event_vector whose event
type is RTE_EVENT_TYPE_CRYPTODEV_VECTOR.
Application should set RTE_EVENT_CRYPTO_ADAPTER_EVENT_VECTOR in
rte_event_crypto_adapter_queue_conf::flag and provide vector configuration
with respect of rte_event_crypto_adapter_vector_limits, which could be
obtained by calling rte_event_crypto_adapter_vector_limits_get, to enable
vectorization.
The event crypto adapter would be responsible for vectorizing the crypto
operations based on provided response information in
rte_event_crypto_metadata::response_info.
Updated drivers and tests accordingly to new API.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
During cleanup `rte_event_port_quiesce` should be called
irrespective of whether an event has been dequeued or not
to flush any prefetched events.
Fixes: 7da008df0c ("app/eventdev: use port quiescing")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The function rte_event_dev_info_get already zeros the info structure.
Therefore the test code doesn't need to do it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Do not include <ctype.h>, <errno.h>, and <stdlib.h> from <rte_common.h>,
because they are not used by this file.
Include the needed headers directly from the files that need them.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Increase number of cryptodev queue pair descriptors by default. Current
size of 128 descriptors does not satisfying minimal requirements of crypto
drivers.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Crypto operation allocation may fail in case when total size of queue
pairs are bigger than the pool size.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Destroying cryptodev resources before exiting workers are not safe.
Moved cryptodev destroy after worker thread exit in main thread.
Fixes: de2bc16e1b ("app/eventdev: add crypto producer mode")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Tx first support to pipeline mode tests, the transmission is done
on all the ethernet ports. This helps in testing eventdev performance
with standalone loopback interfaces.
Example:
./dpdk-test-eventdev ... -- ... --tx_first 512
512 defines the number of packets to transmit.
Add an option Tx packet size, the default packet size is 64.
Following example can change packet size value as 320.
Example:
./dpdk-test-eventdev ... -- ... --tx_first 512 --tx_pkt_sz 320
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use mempool cache for vector mempool as vectors are freed by the Tx
routine, also increase the minimum pool size to 512 to avoid resource
contention on Rx.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Used the new API rte_cryptodev_set_session_event_mdata to set
event crypto metadata from the applications (app/test and
app/test-eventdev) instead of using session userdata.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Quiesce event ports used by the workers core on exit to free up
any outstanding resources.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Event ports are configured to implicitly release the scheduler contexts
currently held in the next call to rte_event_dequeue_burst().
A worker core might still hold a scheduling context during exit, as the
next call to rte_event_dequeue_burst() is never made.
This might lead to deadlock based on the worker exit timing and when
there are very less number of flows.
Add clean up function to release any scheduling contexts held by the
worker by using RTE_EVENT_OP_RELEASE.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Remove rte_*_dev calls from signal handler callback as signal handlers
are supposed to be light weight.
Split ethdev teardown into Rx and Tx sections, wait for
workers to finish processing after disabling Rx to allow workers
to complete processing currently held packets.
Verified SW event device on ARM64 using the following command:
./build/app/dpdk-test-eventdev -l 7-23 -s 0xf00 --vdev=event_sw0
-a 0002:02:00.0 -- --prod_type_ethdev --nb_pkts=0 --verbose 2
--test=pipeline_queue --stlist=o --wlcores 16-23
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventdev. Event crypto metadata used for above processing is
pre-populated in each crypto session.
Parameter --prod_type_cryptodev can be used to enable crypto producer
mode. Parameter --crypto_adptr_mode can be set to select the crypto
adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.
This mode can be used to measure the performance of crypto adapter.
Example:
./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
--prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
--stlist=a --wlcores 1 --plcores 2
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Remove the unnecessary rte_atomic.h included in app modules.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Convert rte_atomic usages to compiler atomic built-ins
for shared data sync in eventdev cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
This commit adds producer, worker and consumer port hints for the
test-eventdev application performance tests.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Introduce a new command line option prod_enq_burst_sz
to set burst size for eventdev enqueue at producer in perf_queue
test. The newly added function perf_producer_burst is called when
prod_enq_burst_sz is greater than 1.
Signed-off-by: Rashmi Shetty <rashmi.shetty@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before this commit, a Control^C exit of the test-eventdev application
would print the worker packet percentages, and leave the terminal with
a green colour despite the colour reset being issued after the newline.
By moving the colour reset command before the \n the issue is fixed.
Fixes: 6b1a14a83a ("app/eventdev: add packet distribution logs")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Include vector configuration into the structure
``rte_event_eth_rx_adapter_queue_conf`` that is used to configure
Rx adapter ethernet device Rx queue parameters.
This simplifies event vector configuration as it avoids splitting
configuration per Rx queue.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
- Disable unsupported apps on Windows
- Enable building of testpmd on Windows
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add option to configure unique mempool for each ethernet device
port. The new option available with `pipeline_atq` and
`pipeline_queue` tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For "order_launch_lcores" function, wmb after that the main lcore
updates the variable "t->err", which represents the end of the test
signal, is unnecessary. Because after the main lcore updates this
signal variable, it will jump out of the launch function loop, and wait
other lcores stop or return error in the main function(evt_main.c).
During this time, there is no storing operation and thus no need for
wmb.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The last lcore declared in the list is also a valid lcore in the list.
Fixes: 32d7dbf269 ("app/eventdev: fix overflow in lcore list parsing")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tainted and unvalidated integer 'idx' used as an index, which may
lead to buffer overflow.
This patch fixed it.
Fixes: 89e5eb1180 ("app/testeventdev: add string parsing helpers")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As with the lib and drivers directories, we can use "continue" keyword to
reduce the indentation level of the majority of the foreach block. At the
same time, we can also replace tab indentation with spaces.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add event vector support in pipeline tests. By default this mode
is disabled, it can be enabled by using the option --enable_vector.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --enable_vector
Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector_size and
--vector_tmo_ns
This patch also adds a new option to set the number of Rx queues
configured per event eth rx adapter.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --nb_eth_queues 4
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Round timeout ticks when converting from nanoseconds, this prevents
loss of accuracy and deviation from requested timeout value.
Fixes: d008f20bce ("app/eventdev: add event timer adapter as a producer")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
For the wmb in order_process_stage_1 and order_process_stage_invalid in
the order test, they can be removed. This is because when the test results
are wrong, the worker core writes 'true' to t->err. Then other worker
cores, producer cores and the main core will load the 'error' index and
stop testing. So, for the worker cores, no other storing operation needs
to be guaranteed after this when errors happen.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
For "processed_pkts" function, no operations should keep the order that
being executed before loading "worker[i].processed_pkts".
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Simply replace rte_smp barrier with atomic threand fence.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
For "processed_pkts" and "total_latency" functions, no operations should
keep the order that being executed before loading
"worker[i].processed_pkts". Thus rmb is unnecessary before loading.
For "perf_launch_lcores" function, wmb after that the main lcore
updates the variable "t->done", which represents the end of the test
signal, is unnecessary. Because after the main lcore updates this
siginal variable, it will jump out of the launch function loop, and wait
other lcores stop or return error in the main function(evt_main.c).
During this time, there is no important storing operation and thus no
need for wmb.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
This patch fixes RTE SMP barrier bugs for the perf test of eventdev.
For the "perf_process_last_stage" function, wmb after storing
processed_pkts should be moved before it. This is because the worker
lcore should ensure it has really finished data processing, e.g. event
stored into buffers, before the shared variables "w->processed_pkts"are
stored.
For the "perf_process_last_stage_latency", on the one hand, the wmb
should be moved before storing into "w->processed_pkts". The reason is
the same as above. But on the other hand, for "w->latency", wmb is
unnecessary due to data dependency.
Fixes: 2369f73329 ("app/testeventdev: add perf queue worker functions")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
For eventdev pipeline test, in burst_tx cases, there is no needed to
set ev.op as RTE_EVENT_OP_RELEASE and call pipeline_event_enqueue_burst
to release events. This is because for tx mode(internal_port=true),
the capability "implicit_release" of dev is enabled, and the app can
release events by "rte_event_dequeue_burst" rather than enqueue.
Fixes: 314bcf58ca ("app/eventdev: add pipeline queue worker functions")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For the fwd mode (internal_port = false) in pipeline test,
processed-pkts increment should after enqueue. However, in
multi_stage_fwd and multi_stage_burst_fwd, "w->processed_pkts" is
increased before enqueue.
To fix this, move "w->processed_pkts" increment after enqueue, and then
the main core can load the correct number of processed packets.
Fixes: 314bcf58ca ("app/eventdev: add pipeline queue worker functions")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
