VLAN stripping configuration is supported only for DPDK PF
previously. Since kernel PF supports VLAN stripping now, this
patch adds VLAN stripping support for both DPDK PF and kernel
PF.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
In function i40e_vsi_config_tc_queue_mapping(), if 'enabled_tcmap' is 0,
'total_tc' might be 0. Then 'total_tc' might be used in a division
by 0 in "qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc)".
Fix it by changing 'total_tc' from 0 to 1 just as func
i40e_vsi_update_queue_mapping() does.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds ability to remove already loaded profile
or write profile without registering it
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
TPID can be set by set_switch_config aq, change the TPID setting
by set_switch_config on new FW release.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds extended processing of DDP packages:
- Execution of adminq command sections to support AQ-depended profiles,
for example, for programming cloud filters types.
- Ability to write a profile without registering it in the list of
applied profiles, to be used for AQ-depended profiles.
- Profile rollback is implemented to support restoration of original
parser/analyzer configuration without the need of core reset,
for example, for deploying new profile without resetting device.
- Search for a specific section in a profile, to be used by driver
to access metadata sections with description of PCTYPE/PTYPEs
defined in the profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch allows detection of upcoming core reset in case NIC gets
stuck while performing FLR reset. The i40e_pf_reset() function returns
I40E_ERR_NOT_READY when global reset was detected.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Instead of accessing register directly, use newly added AQC in
order to blink LEDs. Introduce and utilize a new flag to prevent
excessive API version checking.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Adds double VLAN tagging ethertype fields to Set Switch Parameters AQ
command. These were added in firmware API 1.7.
Callers of i40e_aq_set_switch_config() can specify the ethertypes to
use by filling out the corresponding fields in struct i40e_hw.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds new phy types for 25G Active Optical Cables (AOC) and
Active Copper Cables (ACC) support.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Store information about FEC modes, that were requested. It will be used
in printing link status information function and this way there is no
need to call admin queue there.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
During NVMupdate, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated.
This patch adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Modify the necessary files to be compatible with the new virtchnl.h file
instead of relying on i40e_virtchnl.h variant. This mostly changes
references to VIRTCHNL_ variables by removing prefix of I40E_.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When a port is using a bogus SFP, the PCI probing returns an error,
preventing to register a portid.
To give a better chance to the applications to retry after the SFP is
changed, move this check in eth_i40e_dev_configure(), so that only a
port reconfiguration is needed to retry.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
After adding a fdir rule for IPv6 with input set TC, IPv6 packets
with the specific TC can't be assigned the right queue.
The root cause is that TC is parsed wrongly, this patch fixes
TC parsing problem.
Fixes: 7d83c152a2 ("net/i40e: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Device name resides in two different locations, in rte_device->name and
in ethernet device private data.
For now, the copy in the ethernet device private data is required for
multi process support, the name is the how secondary process finds about
primary process device.
But for drivers there is no reason to use the copy in the ethernet
device private data.
This patch updates PMDs to use only rte_device->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since SSE4 is now part of the minimum requirements for DPDK, we no longer
need these checks.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This causes build error with gcc 7.1.1 :
...dpdk/drivers/net/i40e/i40e_flow.c:2357:2:
error: ‘memset’ used with length equal to number of elements without
multiplication by element size [-Werror=memset-elt-size]
memset(off_arr, 0, I40E_MAX_FLXPLD_FIED);
^~~~~~
...dpdk/drivers/net/i40e/i40e_flow.c:2358:2:
error: ‘memset’ used with length equal to number of elements without
multiplication by element size [-Werror=memset-elt-size]
memset(len_arr, 0, I40E_MAX_FLXPLD_FIED);
^~~~~~
Fixed by providing correct size to memset.
Fixes: 6ced3dd72f ("net/i40e: support flexible payload parsing for FDIR")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
rte_driver->name has the driver name and all physical and virtual
devices has access to it.
Previously it was not possible for virtual ethernet devices to access
rte_driver->name field (because eth_dev used to keep only pci_dev),
and it was required to save driver name in the device private struct.
After re-works on bus and vdev, it is possible for all bus types to
access rte_driver.
It is able to remove the driver name from ethdev device private data and
use eth_dev->device->driver->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
Previously, i40e PMD will select ethertype filter
parser when adding ether pattern rules. In fact,
FDIR also supports ether pattern.
This patch adds ether pattern support for FDIR.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch updates supported patterns for flow
director filters.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch supports input set selection for flow
director filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds flexible payload parsing support for
flow director filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds NVGRE flow parsing function to support NVGRE
classification.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The current vxlan parsing function is not easy to read when parsing
filter type, this patch optimizes the function and makes it more
readable.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
CRC bytes should be excluded, so rx/tx bytes of VF stats is aligned
with PF stats.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tx/Rx byte counts of internal managed packet should be
excluded from the total rx/tx bytes.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This commit adds support of FLAG action and PASSTHRU
action for flow director.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Unfortunately the datasheet has a mistake. The
address of the TX error counter is wrong.
Fixes: 8db9e2a1b2 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously, the FDIR programming time is +11ms on i40e.
This patch will result in an average programming time of
22usec with a max of 60usec .
Signed-off-by: Michael Lilja <ml@napatech.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Return mbuf points of _recv_raw_pkts_vec are modified out of bound.
Fixes: 8e109464c0 ("i40e: allow vector Rx and Tx usage")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
When counting max packet length from MTU, count
VLAN tag length twice for QinQ packets.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Some customers find adding MAC addr to VF sometimes can fail,
but it is still stored in dev->data->mac_addrs[ ]. So this
can lead to some errors that assumes the non-zero entry in
dev->data->mac_addrs[ ] is valid.
Following acknowledgements are from specific NIC PMD
maintainer for their managing part.
This patch changes the ethdev internal API, it should not be
backported to a stable/LTS release so far.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
