Brought in the latest hsi_struct_def_dpdk.h.
HWRM API is now updated to version 1.10.2.15.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update copyright year in various files.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
HWRM API to a newer 1.10.1.70 version.
Few fields have been renamed because of this.
rx_err_pkt -> rx_discard_pkts
rx_drop_pkts -> rx_error_pkts
tx_err_pkts -> tx_discard_pkts
tx_drop_pkts -> tx_error_pkts
link_signal_mode -> active_fec_signal_mode
tx_bd_long_hi.mss -> tx_bd_long_hi.kid_or_ts_high_mss
tx_bd_long_hi.hdr_size -> tx_bd_long_hi.kid_or_ts_low_hdr_size
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Thor based NICs can support PAM4 as wells as NRZ link negotiation.
With this patch we are adding support for 200G link speeds based on
PAM4 signaling. While PAM4 can negotiate speeds for 50G and 100G as
well, the PMD will use NRZ signalling for these speeds.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
In the Stingray use case, representors are conventionally run
inside the SoC domain representing functions that are on the
X86 domain. In order to support this mechanism of building
representors for endpoints that are not in the same host domain,
additional dev args have been in the PMD like so:
rep-based-pf=<physical index> rep-is-pf=<VF=0 or PF=1>
where `rep-based-pf` specifies the physical index of the base PF
that the representor is derived off of.
Since representor(s) can be created for endpoint PFs as well,
rename struct bnxt_vf_representor to bnxt_representor and other such
dev_ops and function names.
devargs have also been extended to specify the exact CoS queue along
with flow control enablement to be used for the conduit between the
representor and the endpoint function.
This is how a sample devargs would look with all the extended devargs
-w 0000:06:02.0,host-based-truflow=1,representor=[1],rep-based-pf=8,
rep-is-pf=1,rep-q-r2f=1,rep-fc-r2f=0,rep-q-f2r=1,rep-fc-f2r=1
Call CFA_PAIR_ALLOC only in case of Stingray instead of CFA_VFR_ALLOC.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Change interface tables to use direct or non-tunneled HWRM messaging
instead of tunneled messaging. Update HWRM API to a new version to
allow this change.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Truflow stack adds VFR to VF and VF to VFR conduits when VF
representor is created. However, in the ingress direction the
VF's fw rules conflict with Truflow rules, resulting in not hitting
the Truflow VFR rules. To fix this, fw is going to remove it’s
VF rules when vf representor is created in Truflow mode and will
restore the removed rules when vf representor is destroyed.
This patch invokes the vf representor alloc and free hwrm commands
as part of which fw will do the above mentioned actions.
Fixes: 1e18ec58ed ("net/bnxt: create default flow rules for port reprentor")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Brought in the latest hsi_struct_def_dpdk.h in order to get
the TF global cfg set/get HWRM cmds.
HWRM API is now updated to version 1.10.1.48
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add Exact Match support
- Create EM table pool of memory indices
- Insert exact match internal entry API
- Sends EM internal insert and delete request to firmware
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Firmware reports any fatal error (either ASIC or Firmware related) via a
new status register. This status register can provide more detailed
information about the firmware errors, especially if error occurs before
HWRM_VER_GET is issued. Attempt to map this register if it is present
and check for firmware status when VER_GET command fails.
Refactored the code to allocate the "bp->recovery_info" structure
in bnxt_init_fw() instead of doing in bnxt_hwrm_error_recovery_qcfg().
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch allows to display flow stats in extended stats.
To do this, DMA-able memory is registered with the FW during device
initialization. Then the driver uses an alarm thread to query the
per flow stats using the HWRM_CFA_COUNTER_QSTATS HWRM command at
regular intervals and stores it locally which will be displayed
when the application queries the xstats.
The DMA-able memory is unregistered during driver cleanup.
This functionality can be enabled using the flow-xstat devarg and
will be disabled by default. The intention behind this is to allow
stats to be displayed for all the flows in one shot instead of
querying one at a time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Update HWRM API to version 1.10.1.6
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Class of Service (CoS) is a way to manage multiple types of
traffic over a network to offer different types of services
to applications. CoS classification (priority to cosqueue) is
determined by the user and configured through the PF driver.
DPDK driver queries this configuration and maps the cos queue
ids to different VNICs. This patch adds this support.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
On Thor, direct access to PTP registers (via GRC) is not supported.
Driver must use HWRM to access the timestamp information.
Vectorized Rx/Tx cannot be enabled if RTE_LIBRTE_IEEE1588=y.
Remove the PTP flags handling code from the vector Rx path.
Add support to read tx timestamp value and the time from the
timesync clock.
On Thor, Rx timestamps are provided directly in the Rx completion
records to the driver. Only 32 bits of the timestamp is present in
the completion. Driver needs to read the current 48 bit free running
timer using the HWRM_PORT_TS_QUERY command and combine the upper
16 bits from the HWRM response with the lower 32 bits in the
Rx completion to produce the 48 bit timestamp for the Rx packet.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FW sets HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERR_RECOVER_RELOAD
in HWRM_FUNC_QCAPS command, if device requires to invoke
fastboot FW during FW reset.
Driver has to poll for shutdown bit in fw_status register:
1. in case of hot fw upgrade, this bit will be set after all
function drivers unregistered with fw.
2. in case of fw initiated error recovery, this bit will be
set after fw has collected the core dump
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When the FW upgrade is initiated the current instance
of FW issues a HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY
async notification to the driver. On receiving this notification,
the PMD shall quiesce itself and poll on the HWRM_VER_GET FW
command at regular intervals.
Once the VER_GET command succeeds, the driver should go through
the rediscovery process and re-initialize the device.
Also register with FW for the reset notify async event.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
This patch adds new FW reset HWRM command.
Code using this command will be added in future patch.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update HWRM API to version 1.10.0.74
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
update HWRM API to v1.9.2.9
Signed-off-by: Rob Miller <rob.miller@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
This patch adds new NVM specific HWRM commands.
Code using these commands will be added in future patches.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add HWRM structures to support more filtering features
like metering, tunnel filters and more.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The hwrm_queue_qportcfg command has been extended to determine
the COS queue that a Tx ring needs to use. This patch adds code
to determine the information from the FW and use it while
creating the Tx rings.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the license header on bnxt files to be the standard
BSD-3-Clause license used for the rest of DPDK,
bring the files in compliance with the DPDK licensing policy.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Implemented the 'time_sync' related APIs for supporting the PTP
protocol.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Add support for get/set_eeprom, get_eeprom_length dev_ops.
Defined the structures required to get/set the eeprom length/data
in hsi_struct_defs hdr file along with implementation.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly using a Rx side HWRM command set_rx_mask to configure
VLAN anti-spoof. This being a Tx side feature, this patch
tries to fix it.
Since the HWRM command to do it is available only in
the newer firmware versions, the patch verifies the firmware
version before attempting to send the HWRM command to
the firmware.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add code to avoid automatic clearing of VF stats on a function
reset or a stat context free.
Add rte_pmd_bnxt_set_vf_persist_stats() PMD specific API.
Fixes: dd46c6bbd5 ("net/bnxt: support get and clear VF specific stats")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support for Stratus VF devices.
Other than adding the VF device ID, we also are adding
support for short message format.
The new short firmware message of size 16 bytes points to a location
in host memory that contains the firmware message that the driver
wants the adapter to process. This indirection requires the
firmware to DMA the message into its own memory for processing.
When the firmware receives a Short Command Format, it will DMA the
firmware message from host memory into its internal memory and then
processes the message as it would have if it received the message
directly in the firmware communication channel.
With BCM57454, the number of VFs increase to 1K and so the requirement
for firmware communication channel memory on adapter becomes expensive.
The short firmware message saves the amount of memory required to support
1K VFs on adapter.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Some HWRM defines are missing from hsi_struct_def_dpdk.h
This patch adds them.
Also remove duplicate HWRM_RING_GRP_ALLOC entry.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to modify MTU using the set_mtu dev_op.
To support frames > 2k, the PMD creates an aggregator ring.
When a frame greater than 2k is received, it is fragmented
and the resulting fragments are DMA'ed to the aggregator ring.
Now the driver can support jumbo frames upto 9500 bytes.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch updates the Broadcom bnxt PMD to version 1.7.7
Most of the changes in the patch are in the hsi_struct_def_dpdk.h - an
autogenerated file. The changes in the *.c files are because of changes
in the macro names.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the PMD to use the 1.5.1 HWRM API.
Most of the changes in the patch are white spaces and rearrangement of the
lines - a onetime change owing to the usage of a different auto generated
file.
Structures updated:
hwrm_stat_ctx_alloc_input, hwrm_stat_ctx_alloc_output,
hwrm_stat_ctx_free_input, hwrm_stat_ctx_free_output,
hwrm_stat_ctx_clr_stats_input, hwrm_stat_ctx_clr_stats_output,
hwrm_exec_fwd_resp_input, hwrm_exec_fwd_resp_output
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the PMD to use packet filtering related structures as per the
1.5.1 version of the HWRM API. Most of the changes in the patch are
white spaces and rearrangement of the lines - a onetime change owing to
the usage of a different auto generated file.
Structures being updated:
hwrm_cfa_l2_filter_cfg_input, hwrm_cfa_l2_filter_cfg_output,
hwrm_cfa_l2_set_rx_mask_input, hwrm_cfa_l2_set_rx_mask_output,
hwrm_cfa_l2_filter_alloc_input, hwrm_cfa_l2_filter_alloc_output,
hwrm_cfa_l2_filter_free_input, hwrm_cfa_l2_filter_free_output
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the PMD to use HWRM ring related structures as per the 1.5.1
version of the HWRM API. Most of the changes in the patch are white
spaces and rearrangement of the lines - a onetime change owing to the
usage of a different auto generated file.
Structures being updated:
hwrm_ring_alloc_input, hwrm_ring_alloc_output, hwrm_ring_free_input,
hwrm_ring_free_output, hwrm_ring_grp_alloc_input,
hwrm_ring_grp_alloc_output, hwrm_ring_grp_free_input,
hwrm_ring_grp_free_output
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the PMD to use VNIC related structures as per the 1.5.1 HWRM API.
Most of the changes in the patch are white spaces and rearrangement of the
lines - a onetime change owing to the usage of a different
auto generated file.
Structures being updated:
hwrm_vnic_alloc_input, hwrm_vnic_alloc_output, hwrm_vnic_free_input,
hwrm_vnic_free_output, hwrm_vnic_cfg_input, hwrm_vnic_cfg_output,
hwrm_vnic_rss_cfg_input, hwrm_vnic_rss_cfg_output,
hwrm_vnic_rss_cos_lb_ctx_alloc_input,
hwrm_vnic_rss_cos_lb_ctx_alloc_output,
hwrm_vnic_rss_cos_lb_ctx_free_input,
hwrm_vnic_rss_cos_lb_ctx_free_output
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the PMD to use the 1.5.1 HWRM API.
Most of the changes in the patch are white spaces and rearrangement of the
lines - a onetime change owing to the usage of a different
auto generated file.
Structures updated:
hwrm_func_qcfg_input, hwrm_func_qcfg_output, hwrm_func_drv_rgtr_input,
hwrm_func_drv_rgtr_output, hwrm_func_drv_unrgtr_input,
hwrm_func_drv_unrgtr_output, hwrm_queue_qportcfg_input,
hwrm_queue_qportcfg_output
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the PMD to use the 1.5.1 HWRM API.
Most of the changes in the patch are white spaces and rearrangement of the
lines - a onetime change owing to the usage of a different
auto generated file.
Structures being updated in this patch:
input, output, hwrm_ver_get_input, hwrm_ver_get_output,
hwrm_func_reset_input, hwrm_func_reset_output, hwrm_func_qcaps_input,
hwrm_func_qcaps_output
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the PMD to use structures as per the 1.5.1 HWRM API.
Most of the changes in the patch are white spaces and rearrangement of the
lines - hopefully a onetime change owing to the usage of a different
auto generated file.
Structures updated:
cmpl_base, tx_cmpl, rx_pkt_cmpl, rx_pkt_cmpl_hi, hwrm_fwd_req_cmpl,
hwrm_async_event_cmpl
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
