Little endian to CPU order conversion had been added for reading
vlan tag from RX descriptor, while its original source line was
forgotten to delete. That's a discarded source line and should be
deleted.
Fixes: 23fcffe8ffac ("ixgbe: fix id and hash with flow director")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The parameter tx_free_thresh is not consistent between the drivers:
some use it as rte_eth_tx_burst() requires, some release buffers when
the number of free descriptors drop below this value.
Let's use it as most fast-path code does, which is the latter, and update
comments throughout the code to reflect that.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function to clear the TX ring when a port was being closed, e.g. on
exit in testpmd, was not checking the mbuf refcnt before freeing it.
Since the function in the vector driver to clear the ring after TX does
not set the pointer to NULL post-free, this caused crashes if mbuf
debugging was turned on.
To reproduce the issue, ensure the follow config variables are set:
RTE_IXGBE_INC_VECTOR
RTE_LIBRTE_MBUF_DEBUG
Then compile up and run testpmd using 10G ports with the vector driver.
Start traffic and let some flow through, then type "stop" and "quit" at
the testpmd prompt, and crash will occur. Output below:
testpmd> quit
Stopping port 0...done
Stopping port 1...PANIC in rte_mbuf_sanity_check():
bad ref cnt
[New Thread 0x7fffabfff700 (LWP 145312)]
[New Thread 0x7fffb47fe700 (LWP 145311)]
[New Thread 0x7fffb4fff700 (LWP 145310)]
[New Thread 0x7ffff6cd5700 (LWP 145309)]
18: [/home/bruce/dpdk.org/x86_64-native-linuxapp-gcc/app/testpmd(_start+0x29)
<....snip for brevity...>
Program received signal SIGABRT, Aborted.
0x00007ffff7120a98 in raise () from /lib64/libc.so.6
A similar error occurs when clearing the RX ring, which is also fixed by
this patch.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As well as the fast-path functions in the rxtx code, there are also
functions which set up and tear down the descriptor rings. Since these
are not performance critical functions, there is no need to have them
extensively optimized, so we add __attribute__((cold)) to their
definitions. This has the side-effect of making debugging them easier as
the compiler does not optimize them as heavily, so more variables are
accessible by default in gdb.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Fix for a minor Sphinx build warning in the ABI guidelines docs:
versioning.rst:126: WARNING: Bullet list ends without a
blank line; unexpected unindent.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
When a target is finished building, it reports just "Build complete".
When building multiple targets simultaneously, e.g.
make install T=x86_64-native-linuxapp-*
and one target fails, it's not always obvious which of the builds
failed. To help this, we add the actual target that is completed to the
"Build complete" message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The code pattern is repeated so many times, it is a good
idea to introduce template like other code here uses.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This fixes lots of complaints from checkpatch about whitespace
and other non-material things. Important to fix the old code now
befor more code does copy/paste of same junk.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since rte_eth_devices is in BSS, the address of rte_eth_devices
plus port_id can not ever be NULL for a valid port_id number.
Remove this unnecessary check and fix the code style.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Nature of the problem was not initialised buffer[256], there were probability
that operation system will provide previously used memory and on special condition
there were probability that string operations will work on random data that
could provide unexpected program behaviour.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Software implementation of the Toeplitz hash function used by RSS.
Can be used either for packet distribution on single queue NIC
or for simulating of RSS computation on specific NIC (for example
after GRE header decapsulating).
Signed-off-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_hash_hash is a public function but was not in
rte_hash_version.map
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When compiling the cxgbe driver with icc, multiple errors about using
enums as integers appear across a number of files, including in the base
code and in the DPDK-specific driver code.
.../drivers/net/cxgbe/cxgbe_main.c(386): error #188: enumerated type mixed
with another type
t4_get_port_type_description(pi->port_type));
^
For the errors in the base driver code we use the CFLAGS_BASE_DRIVER
approach used by other drivers to disable warnings.
For errors in the DPDK-specific code, typecasts are used to fix the
errors in the code itself.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
fm10k was failing to run in XEN domain0, as the physical
memory for DMA should be allocated and translated
in a different way for XEN domain0. So
rte_memzone_reserve_bounded() should be used for DMA
memory allocation, and rte_mem_phy2mch() should be used
for DMA memory address translation to support running
fm10k PMD in XEN domain0.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Multicast loopback must be disabled on PF devices to prevent the adapter
from sending frames back. Required with MOFED 3.0.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
RDs are a new feature of MOFED 3.0 that makes Verbs aware of how CQ and QP
resources are being used for internal performance tuning.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Depending on adapters features and VXLAN support in the kernel, VXLAN frames
can be automatically recognized, in which case checksum validation and
generation occurs on inner and outer L3 and L4.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
TX queue elements (struct txq_elt) contain WR and SGE structures required by
ibv_post_send(). This commit replaces them with a single pointer to the
related TX mbuf considering that:
- There is no need to keep these structures around forever since the
hardware doesn't access them after ibv_post_send() and send_pending*()
have returned.
- The TX queue index stored in the WR ID field is not used for completions
anymore since they use a separate counter (elts_comp_cd).
- The WR structure itself was only useful for ibv_post_send(), it is
currently only used to store the mbuf data address and an offset to the
mbuf structure in the WR ID field. send_pending*() callbacks only require
SGEs or buffer pointers.
Therefore for single segment mbufs, send_pending() or send_pending_inline()
can be used directly without involving SGEs. For scattered mbufs, SGEs are
allocated on the stack and passed to send_pending_sg_list().
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit makes scattered TX support entirely optional by moving it to a
separate function that is only available when MLX4_PMD_SGE_WR_N > 1.
Improves performance when scattered support is not needed.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The "raw" post send interface was experimental and has been deprecated. This
commit replaces it with a new low level interface that dissociates post and
flush (doorbell) operations for improved QP performance.
The CQ polling function is updated as well.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Instead of requesting a completion event for each TX burst, request it on a
fixed schedule once every MLX4_PMD_TX_PER_COMP_REQ (currently 64) packets to
improve performance.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit replaces the CQ polling and QP posting functions
(mlx4_rx_burst() only) with a new low level interface to improve
performance.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Gilad Berman <giladb@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Querying the netdevice instead of deriving the port's MAC address from its
GID is less prone to errors. There is no guarantee that the GID will always
contain it nor that the algorithm won't change.
Signed-off-by: Or Ami <ora@mellanox.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit fixes the "Multiple RX VLAN filters can be configured, but only
the first one works" bug. Since a single flow specification cannot contain
several VLAN definitions, the flows table is extended with MLX4_MAX_VLAN_IDS
possible specifications per configured MAC address.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Or Ami <ora@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Starting from MLNX_OFED 3.0 FW 2.34.5000 when working with optimized
steering mode (-7) QPs can be attached to the port's MAC, therefore no need
for the check.
Signed-off-by: Or Ami <ora@mellanox.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The number of descriptors must be a multiple of MLX4_PMD_SGE_WR_N.
Signed-off-by: Or Ami <ora@mellanox.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit drops "exp" from related function and type names to stop using
the experimental API.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Query interface properties using the ethtool API instead of Verbs
through ibv_query_port(). The returned information is more accurate for
Ethernet links since several link speeds cannot be mapped to Verbs
semantics.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Although using the PMD from a forked process is still unsupported, this
commit makes Verbs safe enough for applications to call fork() for other
purposes.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Make rxq_setup_qp() handle inline support like rxq_setup_qp_rss() instead of
having two separate functions.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This is done by storing the current index in the RX queue structure.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
HAVE_EXP_QUERY_DEVICE is used to check whether ibv_exp_query_device() can be
used. RSS and inline receive features depend on it.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since Mellanox OFED 3.0 and Linux 3.15, interface port numbers are stored
in dev_port instead of dev_id sysfs files.
Signed-off-by: Or Ami <ora@mellanox.com>
Signed-off-by: Nitzan Weller <nitzanwe@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When failing to allocate a segment, mlx4_rx_burst_sp() may call
rte_pktmbuf_free() on an incomplete scattered mbuf whose next pointer
in the last segment is not set.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
GCC_VERSION is empty in case of clang:
/bin/sh: line 0: test: -ge: unary operator expected
It cannot be quoted because an integer is expected.
So the fix is to check empty value in a separate test.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, features and limitations, prerequisites,
configuration, and a sample application usage.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Adds cxgbe poll mode driver for DPDK under drivers/net/cxgbe directory.
This patch:
1. Adds the Makefile to compile cxgbe pmd.
2. Registers and initializes the cxgbe pmd driver.
Enable cxgbe PMD for compilation and linking with changes to:
1. config/common_linuxapp to add macros for cxgbe pmd.
2. drivers/net/Makefile to add cxgbe pmd to the compile list.
3. mk/rte.app.mk to add cxgbe pmd to link.
Update MAINTAINERS file to claim responsibility for the cxgbe PMD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
[Thomas: add disabled config for bsdapp]
Adds hardware specific api for all the Chelsio T5 adapters under
drivers/net/cxgbe/base directory.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
