Support hash flow for the new protocols of GTPU_EH UPLINK, GTPU_EH
DOWNLINK and GTPU_IP.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Refactor hash flow by change the action parser and clean some code.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some new hash flow will be supported to expend the flow hash
capability, the input set are the session id for NAT-T ESP protocol,
the l3 src/dst and the teid for GTPU_IP protocol.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Previous iavf not support 5 tuple hash, this patch aims to enable it
for regular ip pattern and also GTPU inner ip pattern, the 5 tuple
involves ip src and ip dst, tcp sport and tcp dport, udp sport and
udp dport and protocol id.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Refactor hash flow by change the process of the pattern parser and the
action parser, and refine the lookup table for regular IP and GTPU_EH,
ETH, and also VLAN.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The codes has been exposed correctly, so remove pre-processor tags.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Defined DPGFR, Dynamic Power Gate Force Control Register.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add new device ID for Alder Lake brand.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add support to a new MAC type (for Nahum10).
Signed-off-by: Roman Fridlyand <roman.fridlyand@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Adding defines for FEXTNVM8 and FEXTNVM12 registers with new masks for
future use.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Customers had a problem with large pings after connected standby.
This is due to the requirement of maintaining link after CS - the driver
blocks resets during "AdapterStart" and skips flow control setup.
Added condition in e1000_setup_link_ich8lan.c function that always setup
flow control, and setup physical interface only when no need to block
resets.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
VLAN filtering using the VFTA (VLAN Filter Table Array) and
should be initialized prior to setting rx mode.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
As it stands now, this fix will not change the current functionality
of the code. In addition, we remove the comment that seemed to be
a copy/paste from a separate implementation.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Future extended NVM 5 (five) required for a Dynamic Power Gating
control in the MAC.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Due timing issues in WHL and since recovery by host is
not always supported, increased timeout for Manageability Engine(ME)
to finish Ultra Low Power(ULP) exit flow for Nahum before timer expiration.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Added defines for the EEC, SHADOWINF and FLFWUPDATE registers needed for
the nvmupd_validate_offset function to correctly validate the NVM update
offset.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Fix typo in piece of code of NVM access for SPT.
And cleans up the remaining instances in the shared code
where it was not adhering to the Linux code standard.
Wrong description was found in the mentioned file, so fix them.
Remove shadowing variable declarations.
Relating to operands in bitwise operations having different sizes.
Unreachable code since *clock_in_i2c_* always return success.
Don't return unused s32 and don't check for constants.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Found some inconsistent code comments when it came to when we "fall
through", so made them more consistent and non-repetitive.
This patch adds/changes fall through comments to address new warnings
produced by gcc 7.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add support SF/FW synchronization.
Add support to print PBA when using flashless.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Introduce flags to make flexible adjusting
number of outstanding requests.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This patch contains a preliminary support for new LAN device ID.
Signed-off-by: Lotem Leder <lotem.leder@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This code is required for the update for system clock.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
When RSS init, because of profile overlap, the GTPU_IPV4 packets
don't hit GTPU_INNER_IPV4 profile which causes no hash value. Because
of no PPPoE profile, the PPPoE packets also has no hash value. This
patch solves this issue by pulling GTPU_IPV4 profile into inner ipv4
group and creating related PPPoE profile at the same time.
Fixes: 4717a12cfaf1 ("net/ice: initialize and update RSS based on user config")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When create a RSS rule with void action, the error log is "Invalid
input set". This patch fix the issue by adding check for the type of
first actions item.
Fixes: 7615a6895009 ("net/ice: rework for generic flow enabling")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables PPPoE control packets with src mac and session id
and PPPoE data packets with ip address and L4 port in rte_flow.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds testpmd cmdline support for PPPoE.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch defines new RSS offload types for PPPoE. Typically,
session id would be the RSS input set for a PPPoE packet, but
as a hint, each driver may have different default behaviors.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use the flow counter manager to fetch the accumulated stats for
a flow.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The Flow counter manager allocates memory to hold the software view
of the counters where the on-chip counter data will be accumulated
along with another memory block that will be shadowing the on-chip
counter data i.e where the raw counter data will be DMAed into from
the chip.
It also keeps track of the first HW counter ID as that will be needed
to retrieve the counter data in bulk using a TF API. It issues this cmd
in an rte_alarm thread that keeps running every second.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, only vfrep transmit requires cfa_action to be filled
in the tx buffer descriptor. However with truflow, dpdk(non vfrep)
to port also requires cfa_action to be filled in the tx buffer
descriptor.
This patch uses the correct cfa_action pointer while transmitting
the packet. Based on whether the packet is transmitted on non-vfrep
or vfrep, tx_cfa_action or vfr_tx_cfa_action inside txq will be
filled in the tx buffer descriptor.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Invoked 3 new APIs for the default flow create/destroy and to get
the action ptr for a default flow.
Changed ulp_intf_update() to accept rte_eth_dev as input and invoke
the same from the VF rep start function.
ULP Mark Manager will indicate if the cfa_code returned in the
Rx completion descriptor was for one of the default flow rules
created for the VF representor conduit. The mark_id returned
in such a case would be the VF rep's DPDK Port id, which can be
used to get the corresponding rte_eth_dev struct in bnxt_vf_recv
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The support for VF representor and counters is added to the
ulp templates.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Default rules are needed for the packets to be punted between the
following entities in the non-offloaded path
1. Device PORT to DPDK App
2. DPDK App to Device PORT
3. VF Representor to VF
4. VF to VF Representor
This patch fills all the relevant information in the computed fields
& the act_prop fields for the flow mapper to create the necessary
tables in the hardware to enable the default rules.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Representor dev-args need to be parsed during pci probe as they determine
subsequent probe of VF representor ports as well.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When VF-VFR conduits are created, a mark is added to the mark database.
mark_flag indicates whether the mark is valid and has VFR information
(VFR_ID bit in mark_flag). Rx path was checking for this VFR_ID bit.
However, while adding the mark to the mark database, VFR_ID bit is not
set in mark_flag.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add "enum bnxt_ulp_intf_type” as the second parameter for the
port & func helper functions
2. Return vfrep related port & func information in the helper functions
3. Allocate phy_port_list dynamically based on port count
4. Introduce ulp_func_id_tbl array for book keeping func related
information indexed by func_id
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>