The existing documentation for Telemetry is updated, and further
documentation is added.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
As Telemetry no longer uses rte_option, and was the only user of this
infrastructure, it can now be removed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This patch moves telemetry further down the build, and adds it as a
dependency for EAL. Telemetry V2 is now configured to build by default,
and the legacy support is built when the telemetry config flag is set.
Telemetry now has EAL flags, shown below:
"--telemetry" = Enables telemetry (this is default if no flags given)
"--no-telemetry" = Disables telemetry
When telemetry is enabled, it will attempt to open the new socket
version, and also the legacy support socket (this will depend on Jansson
external dependency and telemetry config flag, as before).
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This patch removes the existing telemetry files, which are now redundant
as the new version of telemetry has backward compatibility for their
functionality.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The new telemetry will now open a socket using the old telemetry path,
to ensure backward compatibility. This is not yet initialised, as it
would clash with the existing telemetry, to be removed in a later patch.
This means that both old and new telemetry socket interfaces are
handled in a common way.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The l3fwd-power example app now registers a stats command with
telemetry, and provides a callback function to handle formatting the
power stats.
An example usage is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 63384, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info", "/l3fwd-power/stats", "/rawdev/list", \
"/rawdev/xstats"]}
--> /l3fwd-power/stats
{"/l3fwd-power/stats": {"empty_poll": 281625000, "full_poll": 0, \
"busy_percent": 0}}
The existing stats tracking done by the app using the metrics
library is unaffected. This will still be used to ensure backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The rawdev library now registers commands with telemetry, and
implements the corresponding callback functions. These allow a list of
rawdev devices and xstats for a rawdev port to be queried.
An example usage, with ioat rawdev driver instances, is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 65777, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info", "/rawdev/list", "/rawdev/xstats"]}
--> /rawdev/list
{"/rawdev/list": [0, 1, 2, 3, 4, 5]}
--> /rawdev/xstats,0
{"/rawdev/xstats": {"failed_enqueues": 0, "successful_enqueues": 0, \
"copies_started": 0, "copies_completed": 0}}
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The ethdev library now registers commands with telemetry, and
implements the callback functions. These commands allow the list of
ethdev ports and the xstats and link status for a port to be queried.
An example using ethdev commands is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 64379, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info"]}
--> /ethdev/list
{"/ethdev/list": [0, 1, 2, 3]}
--> /ethdev/link_status,0
{"/ethdev/link_status": {"status": "UP", "speed": 10000, "duplex": \
"full-duplex"}}
--> /ethdev/xstats,0
{"/ethdev/xstats": {"rx_good_packets": 0, "tx_good_packets": 0, \
<snip>
"tx_priority7_xon_to_xoff_packets": 0}}
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This patch adds a python script that can be used with the new telemetry
socket. It connects as a client to the socket, and allows the user send
a command and see the JSON response.
The example usage below shows the script connecting to the new telemetry
socket, and sending three default telemetry commands entered by the user.
The response for each command is shown below the user input.
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 32794, "max_output_len": 16384}
--> /
{"/": ["/", "/help", "/info"]}
--> /info
{"/info": {"version": "DPDK 20.05.0-rc0", "pid": 32794, \
"max_output_len": 16384}}
--> /help,/info
{"/help": {"/info": "Returns DPDK Telemetry information. \
Takes no parameters"}}
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The default commands are now added to provide the list of commands
available, help text for a specified command, and also information
about DPDK and telemetry.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The functions added in this patch will help applications build
up data in reply to a telemetry request.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This patch introduces a new telemetry connection socket and handling
functionality. Like the existing telemetry implementation (which is
unaffected by this change) it uses a unix socket, but unlike the
existing one it does not have a fixed list of commands - instead
libraries or applications can register telemetry commands and callbacks
to provide a full-extensible solution for all kinds of telemetry across
DPDK.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The functions added in this patch will make it easier for telemetry
to convert data to correct JSON responses to telemetry requests.
Tests are also added for these json utility functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Rather than having the telemetry library depend on the metrics
lib we invert the dependency so that metrics instead depends
on telemetry lib, and registers the needed functions with it
at init time. This prepares the way for a cleaner telemetry
architecture to be applied in later patches.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The telemetry code that was moved into the metrics library can be
shortened, while still maintaining the same functionality.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This commit moves some of the telemetry library code to a new file in
the metrics library. No modifications are made to the moved code,
except what is needed to allow it to compile and run. The additional
code in metrics is built only when the Jansson library is present.
Telemetry functions as normal, using the functions from the
metrics_telemetry file. This move will enable code be reused by the new
version of telemetry in a later commit, to support backward
compatibility with the existing telemetry usage.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The global include path, which is used by anything built before EAL,
points to the EAL header files so they utility macros etc. can be used
anywhere in DPDK. This path included the OS-specific EAL header files,
but not the architecture-specific ones. This patch moves the selection
of target architecture to the top-level meson.build file so that the
global include can reference that.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This patch adds CPU flags which will enable the detection of ISA
features available on more recent x86 based CPUs.
The CPUID leaf information can be found in
Table 1-2. "Information Returned by CPUID Instruction" of this document:
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
The following CPU flags are added in this patch:
- AVX-512 doubleword and quadword instructions.
- AVX-512 integer fused multiply-add instructions.
- AVX-512 conflict detection instructions.
- AVX-512 byte and word instructions.
- AVX-512 vector length instructions.
- AVX-512 vector bit manipulation instructions.
- AVX-512 vector bit manipulation 2 instructions.
- Galois field new instructions.
- Vector AES instructions.
- Vector carry-less multiply instructions.
- AVX-512 vector neural network instructions.
- AVX-512 for bit algorithm instructions.
- AVX-512 vector popcount instructions.
- Cache line demote instructions.
- Direct store instructions.
- Direct store 64B instructions.
- AVX-512 two register intersection instructions.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Initialize logging on Windows to send log output
to the console.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Tasnim Bashar <tbashar@mellanox.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Narcisa Vasile <navasile@linux.microsoft.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Fnmatch implementation is required on Windows to support
log level arguments specified with a globbing pattern.
The source file is with BSD-3-Clause license.
https://github.com/lattera/freebsd/blob/master/usr.bin/csup/fnmatch.c
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Tasnim Bashar <tbashar@mellanox.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
When building a target application with static linking mode via
makefiles and enable linking to ibverbs libs by setting
"CONFIG_RTE_IBVERBS_LINK_STATIC=y". The libibverbs.pc will be
chosen and all the libs listed in the file will be linked
by default. Some static lib archives may contain the same files
and common interfaces inside.
The "--no-whole-archive" needs to be enabled for the linker to
discard the useless symbols and resolve the symbols redefinition
error.
Fixes: 2c0dd7b69f ("config: add static linkage of mlx dependency")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
GCC 9.1 fixes a bug with passing bitfields as pass by value in function
parameters and generates a warning for the same as below:
drivers/common/octeontx/octeontx_mbox.c:282:1: note: parameter passing
for argument of type ‘struct mbox_intf_ver’ changed in GCC 9.1
Fix the warning generated by passing bitfield as pass by reference.
Fixes: b4134b2d31 ("common/octeontx: update mbox to version 1.1.3")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Avoid reusing recorded events when performing a migration, since this
may make the migration selection logic pick an already-moved flow.
Fixes: f6257b22e7 ("event/dsw: add load balancing")
Cc: stable@dpdk.org
Reported-by: Venky Venkatesh <vvenkatesh@paloaltonetworks.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Adding support for rx checksum offload. In case of wrong
checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum. It also adds
rx burst function pointer hook for rx checksum offload to
event PMD.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding macro based framework to hook dequeue/enqueue function
pointers to the appropriate function based on rx/tx offloads.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When probing event device in secondary process skip reinitializing
the device data structure as it is already done in primary process.
When removing event device in secondary process skip closing the
event device as it should be done by primary process.
Fixes: 322d0345c2 ("eventdev: implement PMD registration functions")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When eth port queue is removed from Rx adapter using
rte_event_eth_rx_adapter_queue_del() it incorrectly
initializes CQ context instead of modifying it. This
might lead to a crash when CQ context is modified
as a part of rte_eth_dev_stop() sequence as CQ will
hold invalid entries. This is responsibility of an
application to call rte_event_eth_rx_adapter_queue_del()
to remove eth port queue from Rx adapter in tear down
sequence.
Fixes: 37720fc1fb ("event/octeontx2: add Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The flow_verbs_translate() function accumulates hash fields while
iterating through the flow items (SRC_IPV4, DST_IPV4, SRC_IPV6,
DST_IPV6, SRC_PORT_TCP, DST_PORT_TCP, SRC_PORT_UDP, DST_PORT_UDP).
Before this commit the dev_flow handle structure was reused in each new
flow_verbs_translate() call, however the dev_flow->hash_fields variable
was not reset before each call. As a result hash_fields from previous
calls remained present in the current flow which lead to invalid
combinations (e.g. simultaneous IPv4 and IPv6 specs). This scenario
happens for example in the next flows sequence, when running in verbs
mode (dv_flow_en=0).
flow create 0 ingress group 0 pattern eth / ipv4 / end <rss actions>
flow create 0 ingress group 0 pattern eth / ipv6 / end <rss actions>
The fix is to reset dev_flow->hash_fields in flow_verbs_prepare().
Fixes: e7bfa3596a ("net/mlx5: separate the flow handle resource")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch updates the MLX5 PMD and release notes documentations.
Adding the notes of the behavior change that rte flows organization
is switched into non-cached mode for applications.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch updates the MLX5 PMD and release notes documentations.
Adding the guideline for hairpin data buffer size configuration.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The HW is optimized for IPv4/IPv6. For such cases avoid matching on
ethertype, and use ip_version field instead.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce a helper function to set the ip_version match.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
gcc 10.0.1 reports warnings when using mlx5_rte_flow enums
with rte_flow type enums. For example:
../drivers/net/mlx5/mlx5_flow.c: In function ‘flow_hairpin_split’:
../drivers/net/mlx5/mlx5_flow.c:3406:19:
warning: implicit conversion from ‘enum mlx5_rtedflow_action_type’ to
‘enum rte_flow_action_type’ [-Wenum-conversion]
3406 | tag_action->type = MLX5_RTE_FLOW_ACTION_TYPE_TAG;
| ^
../drivers/net/mlx5/mlx5_flow.c:3419:13:
warning: implicit conversion from ‘enum mlx5_rte_flow_item_type’
to ‘enum rte_flow_item_type’ [-Wenum-conversion]
3419 | item->type = MLX5_RTE_FLOW_ITEM_TYPE_TAG;
| ^
Fix by casting to the correct enum.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
All comparison should be done in CPU endianness, otherwise
it will not give right results.
for example:
255 after converting into RTE_BE16 will be biger than 4096 after
converting into RTE_BE16.
Fixes: a5f2da0b81 ("net/mlx5: support modify VLAN ID on new VLAN header")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The assertion was added incorrectly in converting the modify actions
into the format of low layer driver.
There is no mask specified in the rte_flow actions, and PMD driver
will give a mask of all 1s to the field to be modified. For each
field, the mask could not be zero. But for the whole header which
contains this field, the masks of other fields could be zero. The
assertion needs to be removed for debug mode.
Fixes: 72a944dba1 ("net/mlx5: fix header modify action validation")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently, there is no flow aging check and age-out event callback
mechanism for mlx5 driver, this patch implements it. It's included:
- Splitting the current counter container to aged or no-aged container
since reducing memory consumption. Aged container will allocate extra
memory to save the aging parameter from user configuration.
- Aging check and age-out event callback mechanism based on current
counter. When a flow be checked aged-out, RTE_ETH_EVENT_FLOW_AGED
event will be triggered to applications.
- Implement the new API: rte_flow_get_aged_flows, applications can use
this API to get aged flows.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, the counter pool needs 512 ext-counter memory for no batch
counters, it's allocated separately by once, behind the 512
basic-counter memory. This is not easy to get ext-counter pointer by
corresponding basic-counter pointer. This is also no easy for expanding
some other potential additional type of counter memory.
So, need allocate every one of ext-counter and basic-counter together,
as a single piece of memory. It's will be same for further additional
type of counter memory. In this case, one piece of memory contains all
type of memory for one counter, it's easy to get each type memory by
using offsetting.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
PMD create some default control rules with RSS action
if it's not isolated mode.
However whether default control rules need to do RSS or not should be
controlled by device configuration, the mq_mode of rxmode configuration
in specific.
In another word, only when mq_mode is configured with ETH_MQ_RX_RSS_FLAG
set, then RSS is needed for default rules.
Fixes: c64ccc0eca ("mlx5: fix overwritten RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The ULP mark manager originally assumed that zero was an invalid
mark and used it for invalidation and deletion. The mark manager
now supports adding zero as a mark, flags for validity and type,
and adds explicit bounds checking instead of relying on mask.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The current mark handling uses the meta data field of the rxcmp as the
first level check for determining gfid vs lfid. When the meta data is
zero due to only the lowest 16bits of the gfid being set, the cfa code
is incorrectly interpreted as being an lfid. Changing code to look at
meta fmt instead of the meta data directly for the determination.
Fixes: b87abb2e55 ("net/bnxt: support marking packet")
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Due to an errata red algo needs to be set to discard instead of stall
for 96XX C0 silicon for two rate shaping. This workaround is being
already handled for newly created hierarchy but not for dynamic
shaper update cases. This patch hence applies the workaround
even when for shaper dynamic update.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
On detecting outer L4 checksum as bad, both outer and
inner checksums are marked as bad. No need to explicitly
check inner L4 checksum in this case.
Outer L4 UDP checksum error => PKT_RX_OUTER_L4_CKSUM_BAD
and PKT_RX_L4_CKSUM_BAD
Inner L4 UDP checksum error => PKT_RX_L4_CKSUM_BAD
Fixes: 41fe7a3a11 ("net/octeontx2: offload bad L2/L3/L4 UDP lengths detection")
Signed-off-by: Amit Gupta <agupta3@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When octeontx_create() is cleaning up, it does not correctly set
the mac_addrs variable to NULL, which will lead to a double free.
Fixes: 9e399b88ce ("net/octeontx: fix memory leak of MAC address table")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Add support for get firmware version operation.
Get and dump multi boot image (MBI) version as part of get
firmware version string along with Management firmware (MFW) version.
Use qede_fw_version_get() for PMD info logs.
Signed-off-by: Yash Sharma <ysharma@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
A regular memcmp function was used to compare between two objects of
type `struct rte_pci_addr`.
Due to the alignment rules of compiler structure builders, some memory
is not initiated in the structure even though all the fields were
initiated.
Therefore, the comparison may fail even though the PCI addresses are
identical and to cause false failure in probe.
Use the dedicated API to compare 2 PCI addresses.
Fixes: 75dd0ae917 ("vdpa/mlx5: disable RoCE")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Tested-by: Noa Ezra <noae@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
