The checks for libfdt try dependency() first which would only work if
a pkg-config would be present but libfdt has none.
Then it probes for the lib path itself via cc.find_library.
But later it adds the result of either probe to ext_deps which ends up
in build and also the resulting pkg-config to contain toolchain versioned
paths in Libs.private like:
/usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libfdt.so
which obviously breaks on toolchain updates.
In general libs used multiple times - ipn3ke + ifpga in this case - are
checked centrally in config/meson.build so move it there and fix the
adding of dependencies to not use the full file path.
The result is libfdt in pkg-config now showing up as:
Libs.private: -pthread -lm -ldl -lnuma -lfdt -lpcap
Fixes: e1defba4cf ("raw/ifpga/base: support device tree")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the structure passed to configure
API is of the correct type - it's just checked that it is non-NULL. Adding
in the length of the expected structure provides a measure of typechecking,
and can also be used for ABI compatibility in future, since ABI changes
involving structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Since we now allow some parameter checking inside the driver info_get()
functions, it makes sense to allow error return from those functions to the
caller. Therefore we change the driver callback return type from void to
int.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the dev_info structure is of the
correct type - it's just checked that it is non-NULL. Adding in the length
of the expected structure provides a measure of typechecking, and can also
be used for ABI compatibility in future, since ABI changes involving
structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add fecmode setting on NIOS SPI primary initialization.
this SPI is shared by NIOS core inside FPGA, NIOS will
use this SPI primary to do some one-time initialization
after power up, and then release the control to DPDK.
Fix the timeout initialization for polling the
NIOS_INIT_DONE.
Fixes: bc44402f ("raw/ifpga/base: configure FEC mode")
Cc: stable@dpdk.org
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
0x4a means idle status on physical layer. when encounter
0x4a on raw data, it need insert a ESCAPE character for
indication.
Fixes: 96ebfcf8 ("raw/ifpga/base: add SPI and MAX10 device driver")
Cc: stable@dpdk.org
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The variable build is already initialized as true in
drivers/meson.build. Duplicate initializations can be removed from mlx.
When the variable build is set to false, it is easier to call
subdir_done() than branch the rest of the code on build condition.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The ipn3ke driver and the ifpga driver had circular dependencies on each
other, meaning that neither could be built with meson. Fix this by:
* setting the build order of net and raw to match that in makefiles
* removing the dependency from the net driver on the rawdev one
* fixing the dependency names in the rawdev driver meson.build file
Fixes: 8418c92811 ("net/ipn3ke: remove configuration for i40e port bonding")
Fixes: e1defba4cf ("raw/ifpga/base: support device tree")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Remove trailing blank lines. They serve no purpose and are just
editor leftovers.
These can cause git to complain about whitespace errors during merges.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introducing new register and unregister API for ifpga interrupt.
1. register FME and AFU interrupt
ifpga_register_msix_irq()
2. unregister FME and AFU interrupt
ifpga_unregister_msix_irq()
On PAC N3000 card, there is one PCIe MSIX interrupt for FME management,
like the error report, thermal management, we use this interrupt in
ifpga_rawdev device driver. on the other hand, there are about 4 PCIe
MSIX interrupts are reserved for AFU which end-user can use those
interrupts in their AFU logic design. End-user can use those APIs to
register interrupt handler in their AFU drivers.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
In PAC N3000 card, there is one MAX10 chip in each card, and
all of the sensors are connected to MAX10 chip. To support multiple
cards in one server, we introducing a sensor device list under
intel_max10_device instead of a global list. On the other hand, we
using separate intel_max10_device instance for each opae_adatper.
Add mutex lock on do_transaction() function for SPI driver to avoid
race condition.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Add new API to get the board info.
opae_mgr_get_board_info()
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
We can change the PKVL FEC mode when the A10 NIOS FW
initialization. The end-user can use this feature the
change the FEC mode, the default mode is RS FEC mode.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
In PAC N3000 Card, MAX10 Board Management Controller (BMC) implements
the security functionality.
Security functionality adds secure Remote System Update (RSU)
authentication and integrity checks for FPGA flat image,
and FW updates to the card.
This patch adds security feature support for MAX10, in secure solution
some registers and the content of the Device Tree changes.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
The ipn3ke board FPGA and i40e BDF scan has added in ifpga_rawdev,
so it doesn't need to provide configuration for i40e port bonding.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Add SEU interrupt support for FPGA.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
The sensor devices are connected in MAX10 FPGA. we used the
device tree to describe those sensor devices. Parse the device
tree to get the sensor devices and add them into a list.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
The length of send buffer of SPI bus should be 4bytes align.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
In PAC N3000 card, this is a BMC chip which using MAX10 FPGA
to manage the board configuration, like sensors, flash controller,
QSFP, powers. And this is a SPI bus connected between A10 FPGA and
MAX10, we can access the MAX10 registers over this SPI bus.
In BMC, there are about 19 sensors in MAX10 chip, including the FPGA
core temperature, Board temperature, board current, voltage and so on.
We use DTB (Device tree table) to describe it. This DTB file is store
in nor flash partition, which will flashed in Factory when the boards
delivery to customers. And the same time, the customers can easy to
customize the BMC configuration like change the sensors.
Add device tree support by using libfdt library in Linux distribution.
The end-user should pre-install the libfdt and libfdt-devel package
before use DPDK on PAC N3000 Card.
For Centos 7.x: sudo yum install libfdt libfdt-devel
For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1
To eliminate build error, we currently do not compile raw/ifpga
and net/ipn3ke. User should install libfdt and libfdt-devel first,
modify config/common_linux, CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
to CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y, modify config/common_base,
CONFIG_RTE_LIBRTE_IPN3KE_PMD=n to CONFIG_RTE_LIBRTE_IPN3KE_PMD=y.
Then this function can work.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch exposes SEU error information to application then application
could compare this information (128bit) with its own SMH file to know
if this SEU is a fatal error or not.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Every defined bit in FME_ERROR0 is RW1C. Other reserved bits are always
0 when readout and it will plan to be RW1C if needed in future.
So it is safe just write the read back value to clear all the errors.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Add IRQ support for ifpga FME global error, port error and unit.
We implemented this feature by vfio interrupt mechanism.
To build this feature, CONFIG_RTE_EAL_VFIO should be enabled.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
The warning disable flags for the base driver code were copy-pasted from
another source, and are actually unnecessary for this driver. Therefore
remove them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The driver names for rawdevs were both different in make and meson builds
and were non-standard in the make version in that some included "rawdev" in
the name while others didn't.
Therefore, for global consistency of naming, we can use "rte_rawdev" rather
than "rte_pmd" for the prefix for the libraries. While most other driver
categories use "rte_pmd" as a prefix, there is precedent for this in the
mempool drivers use "rte_mempool" as a prefix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
directory. Shorten the names via this patch.
For meson builds, this will rename the final library .so/.a files
produced, but those will be renamed again later via a patch to
standardize rawdev names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
