The Flex10 device/function capability has been upgraded to revision 2
to include information needed to support Flex-10 DCC and DCI
configurations. This patch adds new fields to the i40e_hw_capabilities
structure and updates i40e_parse_discover_capabilities functions to
extract them from the AQ response. Naming convention has changed to use
flex10 mode instead of existing mfp_mode_1.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds capability to query and store the CEE DCBX DesiredCfg
and RemoteCfg data from the LLDP MIB.
Added new member "desired_dcbx_config" in the i40e_hw data structure
to hold CEE only DesiredCfg data.
Store the CEE TLV status returned by firmware to allow drivers to dump that
for debug purposes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Remove unused members in the PHY structure and add a new member to store
all the capabilities the PHY has as reported by the FW. This information will
help us determine what speeds the device is capable of when link is
down.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch prepares the LLDP MIB in IEEE TLV format based on
the local dcb config.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds parsing for CEE DCBX TLVs from the LLDP MIB.
While the driver gets the DCB CEE operational configuration from Firmware
using the "Get CEE DCBX Oper Config" AQ command there is a need to get
the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer; for
debug and other application purposes.
Also gets rid of unused locals variables.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Use macros for abstracting (1 << foo) to BIT(foo)
and (1ULL << foo64) to BIT_ULL(foo64) in order to match
better with linux kernel requirements.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
With latest LANconf and NVMupdate tools, pf_reset failed due to Firmware not
being ready, so this patch increases I40E_PF_RESET_WAIT_COUNT to 200, using
original value defined for A0 silicon, in order to make sure that FW is ready.
Test result indicates that firmware became ready at the loop count of 114.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
There were quite a few issues when the wrong defines were getting used
in the VF driver. This patch defines a new #define PF_DRIVER.
All the PF specific register definitions are wrapped in it.
The drivers will have to be updated to use the define in the PF
driver builds. Makes for a very short register.h for VF drivers.
Also fixes the code where PF driver register fields were getting used for
VF driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
To prepare for the changes coming up in the X722 device and future
devices, the virtual channel interface has to change slightly. The VF
driver can now report what its capable of supporting, which then informs
the PF driver when it sends the configuration information back to the
VF.
A 1.1 VF driver on a 1.0 PF driver should not send its capabilities.
Likewise, a 1.1 PF driver controlling a 1.0 VF driver should not expect
or depend upon receiving the VF capabilities.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds support for "Debug Dump Internal Data" AQ command.
It is used to dump internal firmware or hardware data for debug
purposes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds a workaround to drop any flow control frames from being
transmitted from any VSI. FW can still send Flow control frames if Flow
control is enabled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
NFV use cases require the ability to steer packets to VSIs by VLAN tag
alone while being in promiscuous mode for multicast and unicast MAC
addresses. These two new functions support that ability.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds a member to the nvm_info struct for oem_ver info to be
output either by OID or ethtool.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
There are some rare cases where the release resource call will return an
admin Q timeout. In these cases the code needs to try to release the
resource again until it succeeds or it times out.
Also add little endian conversion for checksum
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add a new GetStatus command so that the NVM update tool can query
the current status instead of doing fake write requests to probe for
readiness.
Add a facility to run AQ commands through the nvmupdate utility in order
to allow the update tools to interact with the FW and do special
commands needed for updates and configuration changes.
Add a facility to recover the result of a previously run AQ command.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This adds wait states to the NVM update state machine to signify when
waiting for an update operation to finish, whether we're in the middle
of a set of Write operations, or we're now idle but waiting.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds support for AQ commands related to Tx scheduling.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add the ability to save the AdminQ write back descriptor. If the writeback
descriptor buffer was previously created, this gives it to the AQ command
request to be used to save the results.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Make sure we have the spinlocks before we clear the ARQ and ASQ management
registers. Also, widen the locked portion and make a sanity check earlier
in the send function to be sure we're working with safe register values.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add a module_types variable to the link_info struct to save the module
information from get_phy_capabilities. This information can be used to
determine which speeds the module supports.
Also add a new function update_link_info which updates the module_types
parameter and then calls get_link_info. This function should be called
in place of get_link_info so that the module_types variable stays
up-to-date with the rest of the link information.
Also rework the function get_link_status to allow caller to get all
return values in the call chain bubbled back to the source, which keeps
information about failures from being lost.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Update the admin queue command header for the Fortville SW 4 Release. As
part of this release the minor FW API version number is bumped to 4 so
that the FW API version for the FVLSW4 release will now be 1.4.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Replace sprintf with i40e_debug.
Pad the line out with zeros to get to 16 bytes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The error code sent into i40e_aq_rc_to_posix() are signed values, so we
really need to treat them as such.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add status value to string decoding routines to be used in error reporting
in order to give more readable error messages rather than bare error
numbers. This decodes both the i40e_status and the AQ error codes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Due to desires to write userland drivers such as for DPDK support, and
other requests, without needing the rest of the include files, the device
ids are pulled out into a standalone file.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Seen by code review.
If dpdk is run with memory only available on a non-0 socket, then i40e pmd
refuses to initialize ports as this pmd requires some memory on socket 0.
Fix this by setting socket to SOCKET_ID_ANY, so that allocations happen on
the caller socket.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
On receive side, the burst size now floor aligns to RTE_IXGBE_DESCS_PER_LOOP
power of 2. According to this rule, the burst size less than 4 still won't
receive anything.
(Before this change, the burst size less than 32 can't receive anything.)
_recv_*_pkts_vec returns no more than 32(RTE_IXGBE_RXQ_REARM_THRESH) packets.
On transmit side, the max burst size no longer bind with a constant, however
it still requires to check the cross tx_rs_thresh violation.
There's no obvious performance drop found on both recv_pkts_vec
and recv_scattered_pkts_vec on burst size 32.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There's a DCB issue on x550. For 8 TCs, if a packet with user priority 6
or 7 is injected to the NIC, then the NIC will put 3 packets into the
queue. There's also a similar issue for 4 TCs.
The root cause is RXPBSIZE is not right. RXPBSIZE of x550 is 384. It's
different from other 10G NICs. We need to set the RXPBSIZE according to
the NIC type.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
RTE_HASH_KEY_LENGTH_MAX was deprecated, and the hash table
actually is hosting bigger keys than that size, so key length
has been increased to properly allocate all keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sujith Sankar <ssujith@cisco.com>
These were deprecated in 2.0 so remove them from 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch adds a note to the README files in the
drivers/net/pmd/base dirs to highlight that the code should not
be modifed by the user apart from the pmd_osdep.[ch] files.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
If the name parameter to rte_eth_bond_create() was NULL,
there was a segmentation fault because eth_dev was also NULL.
Add error handling of mac_addrs memory allocation.
Add call to rte_eth_dev_release_port() in error handling.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
On slave activation in LACP (8023AD) SOCKET_ANY_ID (which is -1)
is being casted to unsigned char and then to signed int.
The result is that socket_id has value of 255, not -1.
This results to memory allocation failure.
Fixes: 46fb436836 ("bond: add mode 4")
Signed-off-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The i40e_xmit_pkts() is called, which often means HW offload is used here,
so we had better remove 'unlikely' check for checksum offload.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
Niantic HW expects Header Buffer Address in the RXD to be word aligned.
So, if mbuf's buf_physaddr is not word aligned then
RX path will not work properly.
Right now, in ixgbe PMD we always setup Packet Buffer Address(PBA) and
Header Buffer Address (HBA) to the same value:
buf_physaddr + RTE_PKTMBUF_HEADROOM.
As ixgbe PMD doesn't support split header feature anyway,
the issue can be fixed just by always setting HBA in the RXD to zero.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds management of PKT_RX_FDIR and PKT_RX_RSS_HASH ol_flags in
vPMD for unified packet type as well as for 16 bit field packet_type when
RTE_NEXT_ABI is not defined.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Example of errors:
error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘uint64_t
error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘unsigned int’
Only 2 files are fixed. The others errors are left as exercise to the authors.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Build log:
error: unused variable ‘cid’
error: ‘RTE_LOG_WARN’ undeclared
error: expected ‘)’ before ‘sc’
There were unused variables defined for debug but not used in debug log because
it was ifdef'ed a the wrong condition (RTE_LIBRTE_BNX2X_DEBUG_DRIVER).
The warning were using WARN instead of WARNING.
Some debug messages had some extra parameters.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When a Tx queue fails to start in fm10k_dev_start, all Rx queues
and Tx queues that are started should be cleaned before the
function returns an error.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
In Rx and Tx queue_disable functions, the index of queue should
be qnum other than i which is the iteration of time expiration.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
