Usage of RTE_MIN(MAX) in ENA_MIN32, ENA_MIN16, ENA_MIN8 (and same for
the MAX), was not enough, as the HAL code is assuming that those macros
will convert both arguments to the specified uintX_t type.
As RTE_MIN(MAX) is using 'typeof' operator, the behavior won't be the
same, especially if arguments has different types (and it could cause
compilation warnings).
To satisfy that, the ENA_MIN_T and ENA_MAX_T macros were added, which
are converting both arguments to the type which is being passed as an
argument.
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Update mail box data structures to sync with af driver mbox
changes done to retrieve VF's base steering rule.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
The macro defined for milliseconds sleep was not putting the thread
to sleep and was simply calling a delay routine. This fix redefines
the macro to call the correct rte sleep API.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Sync the repair of patch("fix compile error for old glibc
caused by CLOCK_MONOTONIC_RAW") in the community.
Fixes: efeed0894e ("net/hinic/base: avoid system time jump")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Get default cos of pf driver from chip configuration file.
Fixes: 6691acef0d ("net/hinic: support VF")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
rx_mbuf_alloc_failed value is not set to 0 when get stats from driver,
which may cause this counter added every time when call this ops.
Fixes: cb7b6606eb ("net/hinic: add RSS stats and promiscuous ops")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
hinic supports two methods: linear table and tcam table,
if tcam filter enables failed but linear table is ok,
which also needs to enable filter, so for this scene,
driver should not close fdir switch.
Fixes: f4ca3fd54c ("net/hinic: create and destroy flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
If rte_zmalloc failed, pmd driver should also delete the ntuple
filter or ethertype filter or normal and tcam filter that already
added before.
Fixes: d7964ce192 ("net/hinic: check memory allocations in flow creation")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
These helper will be reused by other libefx consumers, e.g. vDPA
driver.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Now MCDI helpers interface is independent from network driver and
may be moved into common driver.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Management event queue polling is required in the case of
MCDI proxy authentication (client driver code).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Net driver should use rte_eth_dma_zone_reserve(), but it is ethdev
specific API which is not available for vDPA.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Implement dummy MCDI timeout handling which simply rejects
further MCDI requests.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Prepare to avoid usage of the adapter context in common MCDI helpers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Network driver logging macros depends on sfc_adapter which is
specific to the driver and cannot be used in common code.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
sfc_adapter is network driver specific structure which finally
should not be used in shared MCDI helpers interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Prepare to move MCDI helpers to drivers/common.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MCDI helpers will be moved to common/sfc_efx and it is better
to do dummy renamings first before non-trivial changes.
Existing functionality should be split into common and network
driver specific parts. Prepare to do it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MCDI helpers will be shared by net and vDPA drivers.
Prepare to move it to common/sfc_efx.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Move libefx (base driver) into common driver.
Prepare to add vDPA driver which will use the common driver as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Avoid build failures on further restructuring.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The decorator may be used in the future to instruct linker
to put it into dedicated sections or hide.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Mark Spender <mspender@xilinx.com>
Reviewed-by: Richard Houldsworth <rhouldsw@xilinx.com>
The decorators will be used in the future to mark libefx API
functions as __rte_internal.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Richard Houldsworth <rhouldsw@xilinx.com>
libefx coding standard requires it and the specifier is
used for almost all functions in the header file.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Richard Houldsworth <rhouldsw@xilinx.com>
Add VXLAN encapsulation example to the SWX pipeline application. The
VXLAN tunnels can be generated with the vxlan_table.py script. Example
command line: ./build/pipeline -l0-1 -- -s ./examples/vxlan.cli
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add L2 Forwarding example with MAC destination and source address swap
to the SWX pipeline application. Example command line:
./build/pipeline -l0-1 -- -s ./examples/l2fwd_macswp.cli
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add network-based connectivity mechanism for the application to allow
for the exchange of configuration messages through the network as
opposed to local CLI only.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add new example application to showcase the API of the newly
introduced SWX pipeline type.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the exact match table type for the SWX pipeline. Used under the
hood by the SWX pipeline table instruction.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the PCAP file-based source (input) and sink (output) port types
for the SWX pipeline. The sink port is typically used to implement the
packet drop pipeline action. Used under the hood by the pipeline rx
and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the Ethernet device input/output port type for the SWX pipeline.
Used under the hood by the pipeline rx and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add support for building the SWX pipeline based on specification file
with syntax aligned to the P4 language. The specification file may be
generated by the P4C compiler in the future.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
High-level transaction-oriented API for SWX pipeline table updates. It
supports multi-table atomic updates, i.e. multiple tables can be
updated in a single step with only the before and after table set
visible to the packets. Uses the lower-level table update mechanisms.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Query API to be used by the control plane to detect the configuration
and state of the SWX pipeline and its internal objects.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Instruction optimizer. Detects frequent patterns and replaces them
with some more powerful vector-like pipeline instructions without any
user effort. Executes at instruction translation, not at run-time.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Instruction verifier. Executes at instruction translation time during
SWX pipeline build, i.e. at initialization instead of run-time.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The jump instructions are either unconditional (jmp) or conditional on
positive/negative tests such as header validity (jmpv/jmpnv), table
lookup hit/miss (jmph/jmpnh), executed action (jmpa/jmpna), equality
(jmpeq/jmpneq), comparison result (jmplt/jmpgt). The return
instruction resumes the pipeline execution after action subroutine.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The extern instruction calls one of the member functions of a given
extern object or it calls the given extern function. The function
arguments must be written in advance to the mailbox. The results
are available in the same place after execution.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The table instruction looks up the input key into the table and then
it triggers the execution of the action found in the table entry. On
lookup miss, the default table action is executed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The shr (i.e. shift right) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The shl (i.e. shift left) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The xor (i.e. bitwise exclusive or) instruction source can be header
field (H), meta-data field (M), extern object (E) or function (F)
mailbox field, table entry action data field (T) or immediate value
(I). The destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The or (i.e. bitwise or) instruction source can be header field (H),
meta-data field (M), extern object (E) or function (F) mailbox field,
table entry action data field (T) or immediate value (I). The
destination is HMEF.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
