RSS implementation with parent/child QPs comes from mlx4 and is temporary.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In its current state, this driver implements the bare minimum to initialize
itself and Mellanox ConnectX-4 adapters without doing anything else
(no RX/TX for instance). It is disabled by default since it is based on the
mlx4 driver and also depends on libibverbs.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Or Ami <ora@mellanox.com>
For every packet sent, a completion was being requested and the
posted_index register on the nic was being updated. Instead, request a
completion and update the posted index once per burst after all
packets have been sent by the burst function.
Signed-off-by: John Daley <johndale@cisco.com>
Acked-by: Sujith Sankar <ssujith@cisco.com>
To support FVL PMD can select which RX and TX function should be used
according to the queue config.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
To support the multiple segments in one packets when the received pkts exceed
one buffer size.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
The way to increase the performance of the vPMD TX is to use some fast mbuf
release method compares to the scalar TX.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
The vPMD RX function uses the multi-buffer and SSE instructions to
accelerate the RX speed, but now the pktype cannot be supported by the vPMD RX,
because it will decrease the performance heavily.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Feature Add: Rx/Tx flow control support for the i40e
All the Rx/Tx LFC enable/disable operation is done by the F/W,
so PMD driver need to use the Set PHY Config AD command to trigger the PHY
to do the auto-negotiation, after the Tx/Rx pause ability is negotiated,
the F/W will help us to set the related LFC enable/disable registers.
PMD driver also need to configure the related registers to control
how often to send the pause frame and what the value in the pause frame.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If DPDK is used on VF while the host is using Linux Kernel driver
as PF driver on FVL NIC, then VF Rx is reported only in batches of
4 packets. It is due to the kernel driver assumes VF driver is working
in interrupt mode, but DPDK VF is working in Polling mode.
This patch fixes this issue by using the V1.1 virtual channel with
Linux i40e PF driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a workaround to drop flow control frames from being
transmitted from VSIs.
With this patch in place a malicious VF cannot send flow control or PFC
packets out on the wire.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Boulder Rapid is Intel new NIC within fm10k family.
This patch make DPDK driver support this new NIC.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
This patch enables fm10k TSO feature for both non-tunneling packet
and tunneling packet.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
When datapath rxq interrupt is enabled, enable related device rxq.
Remove the interrupt handler after device stopped.
e1000 only support one type of interrupt cause, so remove lsc interrupt
handler if rxq enabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Enable rx interrupt support on e1000 physical and emulated device.
Implement rxq interrupt related functions in eth_dev_ops structure.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Separate lsc and rxq interrupt for they have different interrupt handlers.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Only mask lsc interrupt bit when setup device interrupt.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Implement the new CLIs for fdir mac vlan and tunnel modes, including
flow_director_filter and flow_director_mask. Set the mask of fdir.
Add, delete or update the entities of filter.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch marks rxq with RTE_SET_USED in
rx_desc_hlen_type_rss_to_pkt_flags(), when
ieee1588 is disabled. Previously a compilation
error occurred on unused-parameter.
Fixes: 1ce6591e23 ("igb: fix ieee1588 frame identification in i210")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch implements the VF RSS reta/hash query and update function
on 10G NICs. But the update function is only provided for x550. Because
the other NICs don't have the separate registers for VF, we don't want
to let a VF NIC change the shared RSS reta/hash registers. It may cause
PF and other VF NICs' behavior change without being noticed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
On x550, there're separate registers provided for VF RSS while on the other
10G NICs, for example, 82599, VF and PF share the same registers.
This patch lets x550 use the VF specific registers when doing RSS configuration
on VF. The behavior of other 10G NICs doesn't change.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Comparing with the older NICs, x550's RSS redirection table is enlarged to 512
entries. As the original code is for the NICs which have a 128 entries RSS table,
it means only part of the RSS table is set on x550. So, RSS cannot work as
expected on x550, it doesn't redirect the packets evenly.
This patch configs the entries beyond 128 on x550 to let RSS work well, and also
update the query and update functions to support 512 entries.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch will drop flow control frames from being transmitted
from VSIs.
With this patch in place a malicious VF cannot send flow control
or PFC packets out on the wire.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
At the original point the rx_pkts[pos( + n)] pointers are not initialized,
so the code is prefetching random data.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Incorrect operator in ixgbe_get_eeprom & ixgbe_set_eeprom prevents
last byte of EEPROM being read/written, and hence cannot be dumped
or updated in entirity using these functions.
Fixes: 0198848a47 ("ixgbe: add access to specific device info")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds the mspdc (MAC Short Packet Discard Count)
to the total rx errors, as discussed on the dev@dpdk mailing
list: http://comments.gmane.org/gmane.comp.networking.dpdk.devel/23717
Suggested-by: Igor Ryzhov <iryzhov@arccn.ru>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove receive jabber count (rjc) from ierrors count as the
register overlaps with the CRC error register, previously
causing some packets to be counted twice.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ixgbe based 82598 and 82599 have different priority receive link-on
register addresses. This is solved in base/ by providing in the
PXONRXC and PXONXCNT as separate macros. This patch ensures the
correct address is read, avoiding reading garbage values.
Also PXON2OFFCNT doesn't exist in 82598, so it is not read for
that MAC.
This issue has existed since the drivers were imported into DPDK,
but was not easily discoverable as xstats were not available.
Tested using testpmd> show port xstats all
Fixes: af75078fec ("first public release")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When setting TSO on VF ixgbe NICs, for example, 82599, x550, the
prompt that TSO is not supported will be printed. But TSO is
supported by VF ixgbe NICs.
We should add TSO to the capability flag, so, we will not see the
wrong prompt.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Fix a misinterpreatation of VF statistic macro in e1000/igb.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Roger Melton <rmelton@cisco.com>
Fixed issue where the flag PKT_RX_IEEE1588_PTP was not being set
in Intel I210 NIC, as EtherType in RX descriptor is in bits 8:10 of
Packet Type and not in the default bits 0:2.
Fixes known issue "IEEE1588 support possibly not working
with an Intel Ethernet Controller I210 NIC"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch enables igb TSO feature, the feature works on both PF and VF.
The TCP segmentation offload needs to write the offload related information
into the advanced context descriptors, which is similar to checksum offload.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch fixes a bug in reading the 64 bit register reading
which was causing the total octets counters to show zero.
Now the code reads both the lower and higher 32 bits.
Tested in testpmd, byte values are correct.
Fixes: 805803445a ("e1000: support EM devices (also known as e1000/e1000e)")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On power up, the MAC - PHY interface needs to be set to PCIe, even if
cable is disconnected. In ME systems, the ME handles this on exit from
Sx(Sticky mode) state. In non-ME, the driver handles it. Added a check
for non-ME system to the driver code that handles that.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously, in check_reset_block RSPCIPHY was polled for 100 ms before determining
that the ME veto is set. This needed to be increased to 300 ms.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enabling ulp on link down when cable is connect caused an infinite
loop of linkup/down indications in the NDIS driver.
After discussed, correct flow is to enable ULP only when cable is
disconnected.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Requires driver changes!
Change e1000_set_eee_i350 and e1000_set_eee_i354 to have flags allowing
changes in the advertised EEE speeds.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are some images which contain ETrackID in inverted format. This patch
allows reading this format.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
EEARBC has changed on i210. It means EEARBC has a different address on
i210 than on other NICs. So, add a new entity named EEARBC_I210 to the
register list and make sure the right one is being used on i210.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
These are the defaults for the packet buffer size registers that need to
be explicitly set back if someone changes them and comes back to a normal
driver.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch is for the following updates to the K1 configurations:
Tx idle period for entering K1 should be 128 ns.
Minimum Tx idle period in K1 should be 256 ns.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In case that auto-negotiate is not enabled, call
e1000_setup_copper_link_generic instead of e1000_phy_setup_autoneg.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
e1000_check_for_link_media_swap() is supposed to check PHY page 0 for
copper and PHY page 1 for "other" (fiber) link. We switched back from
page 1 to page 0 too soon, before e1000_check_for_link_82575() is
executed and we were never finding link on fiber (other).
Note: The precedence of link type is controlled by the PHY settings.
If the link is copper, as the M88E1112 page address is set to 1, it should be
set back to 0 before checking this link.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
