This patch addresses the following issues reported by cppcheck:
[drivers/net/mlx4/mlx4_rxtx.c:266]: (error) Shifting signed 32-bit value
by 31 bits is undefined behaviour
[drivers/net/mlx4/mlx4_rxtx.c:624]: (error) Shifting signed 32-bit value
by 31 bits is undefined behaviour
[drivers/net/mlx4/mlx4_txq.c:89]: (error) Shifting signed 32-bit value by
31 bits is undefined behaviour
[drivers/net/mlx4/mlx4_txq.c:91]: (error) Shifting signed 32-bit value by
31 bits is undefined behaviour
Fixes: 78e81a9844 ("net/mlx4: merge Tx queue rings management")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Using inner RSS by default for GRE leads to memory corruption as the
extra flow items added for the inner RSS are not counted in the flow
attributes buffer size.
Fixing by enforcing the default RSS level to be outer. This much
simplify the flow engine and more robust.
Future optimization for out of the box RSS can be done on subsequent
commits.
Fixes: d4a405186b ("net/mlx5: support tunnel RSS level")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When resetting ports, traffic will be blocked. There is a mistake when
getting hw info at avf_dev_stop. This causes the device stop without
stopping queues. This patch fixes this issue.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
To support kernel VF, PBA bit is always set. But it may
cause the too many interrupts issue on specific Linux
kernel versions, e.g. 4.4.0-116.
PF host should set the auto clean, mask and throttling
as we always set the register for kernel VF.
Fixes: 6b75183ac4 ("net/ixgbe: fix wrong PBA setting")
Cc: stable@dpdk.org
Signed-off-by: Michael Luo <michael.luo@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
If flow director is enabled, FDIR Tx queue can't
be disabled when exiting application. Root cause
is FDIR Tx queue is not disabled before removing
HMC backing store.
Fixes: 71d35259ff ("i40e: tear down flow director")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Such a message could be generated by two places
in the code, and there is a difference in the
text albeit there is no difference in the meaning.
These two messages must be the same so that
automated error log comparison may be carried
out without confusion.
Fixes: a9825ccf5b ("net/sfc: support flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Number of descriptors in equal stride super-buffer Rx mode defines
number of packet buffers to be used. Each HW Rx descriptor has
many packet buffers and the number depends on total size of mbuf
and CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB value.
Typically it makes a bit less than 32 buffers per descriptor.
Since HW Rx descriptors must be pushed by 8, it makes about 256
as required minimum. Double it in advertised minimum to allow for
at least 2 refill blocks.
Fixes: 390f9b8d82 ("net/sfc: support equal stride super-buffer Rx mode")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Running testpmd command "flow isolae <port> 0" (i.e. disabling flow
isolation) followed by command "flow isolate <port> 1" (i.e. enabling
flow isolation) may result in a TAP error:
PMD: Kernel refused TC filter rule creation (17): File exists
Root cause analysis: when disabling flow isolation we keep the local
rule to redirect packets on TX (TAP_REMOTE_TX index) while we add it
again when enabling flow isolation. As a result this rule is added
two times in a row which results in "File exists" error.
The fix is to identify the "File exists" error and silently ignore it.
Another issue occurs when enabling isolation mode several times in a
row in which case the same tc rules are added consecutively and
rte_flow structs are added to a linked list before removing the
previous rte_flow structs.
The fix is to act upon isolation mode command only when there is a
change from "0" to "1" (or vice versa).
Fixes: f503d26948 ("net/tap: support flow API isolated mode")
Cc: stable@dpdk.org
Reviewed-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
I have unfortunately no longer time enough for maintaining Tap PMD.
Keith has kindly volunteered to take over maintainership. He's been at
the origin of this PMD and knows well how it works.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
This patch caches all dirty pages logging until the used ring index
is updated.
The goal of this optimization is to fix a performance regression
introduced when the vhost library started to use atomic operations
to set bits in the shared dirty log map. While the fix was valid
as previous implementation wasn't safe against concurrent accesses,
contention was induced.
With this patch, during migration, we have:
1. Less atomic operations as only a single atomic OR operation
per 32 or 64 (depending on CPU) pages.
2. Less atomic operations as during a burst, the same page will
be marked dirty only once.
3. Less write memory barriers.
Fixes: 897f13a1f7 ("vhost: make page logging atomic")
Cc: stable@dpdk.org
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
IBV_RX_HASH_INNER should be referenced only when having tunnel support
in the Verbs headers.
Fixes: 80f2d0ed7f ("net/mlx5: add hardware flow debug dump")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Drop flow rules are created on the ETH queue even though the parser layer
matches the flow rule layer (L3/L4)
Fixes: 6f2f4948b2 ("net/mlx5: fix flow director rule deletion crash")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In legacy-mem mode, memory event callback registering is not supported,
we should not return error in dev_init on this case.
Fixes: 12ecb2f63b ("net/virtio-user: support memory hotplug")
Suggested-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Currently VIRTIO_NET_F_MAC is set unconditionally when server
mode is used. It should be stripped when MAC isn't specified.
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The ol_flags of mbufs returned by rte_vhost_dequeue_burst()
contain necessary offload information. It can't be zeroed.
Fixes: f63d356ee9 ("net/vhost: insert/strip VLAN header in software")
Cc: stable@dpdk.org
Reported-by: Lei Yao <lei.a.yao@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch enables the handling of buffers non-contiguous in
virtual address space in the vhost_crypto. Instead of using
rte_vhost_va_from_guest_pa(), the host virtual address is
converted by vhost_iova_to_vva() for wider use cases.
For copy mode, the copy length is limited to the chunk size,
next chunks VAs being fetched afterward.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the redundant descriptor move in the copy mode
of vhost crypto. Originally the redundant descriptor move will
cause the message parsing error.
Fixes: 3bb595ecd6 ("vhost/crypto: add request handler")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the backend is vhost-net, virtio-user must work in client mode and
needs to request features from the backend in virtio_user_dev_init().
But currently, virtio-user is assigned to default features in this case.
This patch is to fix this inappropriate feature setting.
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Fixes: ccdcba53a3 ("net/mlx5: use Netlink to add/remove MAC addresses")
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
In function ‘elink_check_kr2_wa’:
drivers/net/bnx2x/elink.c:12922:28:
error: bitwise comparison always evaluates to false
[-Werror=tautological-compare]
((next_page & 0xe0) == 0x2))));
This was fixed elsewhere in 2014
Fixes: b5bf771922 ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
This is stopping the compiler telling you when you have
done something stupid... that is something none of us
can afford...
Now gcc 8.x can tell you did something stupid despite
trying to hide the evidence.
Remove all the "black magic" casts.
Fix the actual problems.
Fixes: b5bf771922 ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
Currently, populate_virt will check if mempool is already populated.
This will cause inability to reserve multi-chunk mempools if
contiguous memory is not a hard requirement, because if allocating
all-contiguous memory fails, mempool will retry with virtual addresses
and will call populate_virt. It seems that the original code never
anticipated more than one non-physically contiguous area.
Fix it by removing the check in populate virt. populate_anon() function
calls populate_virt() also, and it can be reasonably inferred that it is
expecting that virtual area is not already populated. Even though a
similar check is already in place there, also add the check that was
part of populate_virt() just in case.
Fixes: aab4f62d6c ("mempool: support no hugepage mode")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The intention of the original code was to create runtime data
directory as early as possible, however it was moved too early,
before the arguments were parsed, resulting in --file-prefix
option essentially not working.
Fix this by moving eal_create_runtime_dir() to after command
line arguments parsing.
Fixes: 56236363b4 ("eal: add directory for runtime data")
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Variable dri_name is a pointer and it is incorrect to use its
size as the buffer size. Caller knows the buffer size and
it is safer to pass it explicitly.
Fixes: fe5f777b53 ("bus/pci: replace strncpy by strlcpy")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fix all calls to functions in eal_filesystem to produce paths
residing inside dedicated DPDK runtime directory. Leaving DPDK
runtime config in place as 3rd-party applications within the
DPDK ecosystem might rely on this path to determine whether
DPDK is running, so moving that will be postponed to the next
release cycle.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, during runtime, DPDK will store a bunch of files here
and there (in /var/run, /tmp or in $HOME). Fix it by creating a
DPDK-specific runtime directory, under which all runtime data
will be placed. The template for creating this runtime directory
is the following:
<base path>/dpdk/<DPDK prefix>/
Where <base path> is set to either "/var/run" if run as root, or
$XDG_RUNTIME_DIR if run as non-root, with a fallback to /tmp if
$XDG_RUNTIME_DIR is not defined. So, for example, if run as root,
by default all runtime data will be stored at /var/run/dpdk/rte/.
There is no equivalent of "mkdir -p", so we will be creating the
path step by step.
Nothing uses this new path yet, changes for that will come in
next commit.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
The original name for this path was not too descriptive and
confusing. Rename it to a more appropriate and descriptive name:
it stores data about hugepages, so name it eal_hugepage_data_path().
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
The define was a leftover from IVSHMEM library.
Fixes: c711ccb309 ("ivshmem: remove library and its EAL integration")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
On Fedora 28, every patch is faulted for
"Wrong headline uppercase", because [A-Z] is not
always case sensitive.
Change to use [[:upper:]]
Signed-off-by: Andy Green <andy@warmcat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
app/test-bbdev/test_bbdev_vector.c:895:3:
error: ‘strncpy’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-bbdev/test_bbdev_vector.c:917:5:
error: ‘strncat’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
app/proc-info/main.c: In function ‘nic_xstats_display’:
app/proc-info/main.c:495:45: error:
‘%s’ directive writing up to 255 bytes into a regioni of size between 165 and 232
[-Werror=format-overflow=]
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~
app/proc-info/main.c:495:4: note:
‘sprintf’ output between 31 and 435 bytes into a destination of size 256
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xstats_names[i].name, values[i]);
Fixes: 2deb6b5246 ("app/procinfo: add collectd format and host id")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Continue snprintf to strlcpy conversions started by commit
c022cb400e ("convert snprintf to strlcpy").
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
drivers/net/vdev_netvsc/vdev_netvsc.c:335:2:error:
passing argument 2 to restrict-qualified parameter aliases with argument 1
ret = readlink(buf, buf, size);
^~~
Fixes: e7dc5d7bec ("net/vdev_netvsc: implement core functionality")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: 73280c1e4f ("net/sfc: support xstats retrieval by ID")
Fixes: 7b9891769f ("net/sfc: support extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
drivers/net/nfp/nfp_net.c:669:2: error:
‘memcpy’ forming offset [5, 6] is out of the bounds [0, 4]
of object ‘tmp’ with type ‘uint32_t’ {aka ‘unsigned int’}
[-Werror=array-bounds]
memcpy(&hw->mac_addr[0], &tmp, sizeof(struct ether_addr));
Fixes: e6decee382 ("net/nfp: use random MAC address if not configured")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Alejandro Lucero <alejandro.lucero@netronome.com>
drivers/net/nfp/nfpcore/nfp_resource.c:76:2:error:
‘strncpy’ output may be truncated copying 8 bytes from a string of length 8
[-Werror=stringop-truncation]
strncpy(name_pad, res->name, sizeof(name_pad));
Fixes: c7e9729da6 ("net/nfp: support CPP")
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
drivers/net/nfp/nfp_net.c: In function ‘nfp_pf_pci_probe’:
drivers/net/nfp/nfp_net.c:3160: 23: error:
‘%s’ directive writing up to 99 bytes into a region of size 76
[-Werror=format-overflow=]
sprintf(fw_name, "%s/%s.nffw", DEFAULT_FW_PATH, serial);
Note fw_buf still has to increase somewhat even after
restricting serial[], since otherwise:
drivers/net/nfp/nfp_net.c: In function ‘nfp_pf_pci_probe’:
drivers/net/nfp/nfp_net.c:3176:23:
error: ‘%s’ directive writing up to 99 bytes into a region of size 76
[-Werror=format-overflow=]
sprintf(fw_name, "%s/%s", DEFAULT_FW_PATH, card);
^~
drivers/net/nfp/nfp_net.c:3262:32:
err = nfp_fw_upload(dev, nsp, card_desc);
~~~~~~~~~
drivers/net/nfp/nfp_net.c:3176:2:
note: ‘sprintf’ output between 25 and 124 bytes into a destination of size 100
sprintf(fw_name, "%s/%s", DEFAULT_FW_PATH, card);
Fixes: 896c265ef9 ("net/nfp: use new CPP interface")
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
drivers/net/axgbe/axgbe_phy_impl.c:576:6: error:
‘__builtin_memcmp_eq’ reading 16 bytes from a region of size 9
[-Werror=stringop-overflow=]
if (memcmp(&sfp_eeprom->base[AXGBE_SFP_BASE_VENDOR_NAME],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AXGBE_BEL_FUSE_VENDOR, AXGBE_SFP_BASE_VENDOR_NAME_LEN))
Fixes: a5c7273771 ("net/axgbe: add phy programming APIs")
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
