For 2.1 release, in attempt to minimize number of RX routines to support,
ixgbe scatter and ixgbe LRO RX routines were merged into one
that can handle both cases.
Though I completely missed the fact, that while LRO could only be used
when HW CRC strip is enabled, scatter RX should work for both cases
(HW CRC strip on/off).
That patch restores missed functionality.
Fixes: 9d8a92628f ("ixgbe: remove simple scalar scattered Rx method")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. cpu use data owned by ixgbe must use rte_le_to_cpu_xx(...)
2. cpu fill data to ixgbe must use rte_cpu_to_le_xx(...)
3. checking pci status with converted constant
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the issue:
Testpmd crashed with Segmentation fault when setup tx queues on vf
Steps for reproduce:
- create one vf device from i40e driver
- bind vf device to igb_uio and start testpmd
With debugging tools, we saw the struct i40e_vf is cleared after
memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf)) in
rte_eth_dev_configure, which should not happen, and the pointer to
i40e_vf isn't in the range of i40e_adapter.
The root cause is the dev_private_size in i40e virtual function driver
struct rte_i40evf_pmd was set incorrectly.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
The patch does below for igb PF:
- Setup NIC to generate MSI-X interrupts
- Set the IVAR register to map interrupt causes to vectors
- Implement interrupt enable/disable functions
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch does below things for ixgbe PF and VF:
- Setup NIC to generate MSI-X interrupts
- Set the IVAR register to map interrupt causes to vectors
- Implement interrupt enable/disable functions
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the rte_dev_uninit_t() function for the link bonding pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
As Steve pointed out, the commit 11b220c649 ("ixgbe: fix release queue mbufs")
is not complete.
As at queue stop we don't reset vector related rx queue fields to their
initial values.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Reported-by: Cunming Liang <cunming.liang@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
fm10k has the capability to do checksum offload in TX side. This
change will expose the capability to application in infos_get
function.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the rte_dev_uninit_t() function for the ring pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.ruchardson@intel.com>
This is build infrastructure changes for bnx2x driver.
- enable BNX2X poll mode driver in default config.
- add it to mk
- put entry in MAINTAINERS
Note: I intentionally did not list myself as maintainer of this
driver. QLogic has discussed taking over as maintainer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
More code for the Broadcom/Qlogic NetExtreme II poll mode driver.
Split into pieces for review and not to overwhelm mailers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
This is the first of several parts for a new driver supporting
Broadcom/Qlogic NetXtremeII 10 gigabit devices.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
This patch enables jumbo frame support for the 82583V.
It has been tested ( rx and tx ) with real HW.
Signed-off-by: Klaus Degner <kd@allegro-packets.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The check for split packets to be reassembled in the vector ixgbe PMD
was incorrectly only checking the first 16 elements of the array instead
of all 32. This is fixed by changing the uint32_t values to be uint64_t
instead.
Fixes: cf4b4708a8 ("ixgbe: improve slow-path perf with vector scattered Rx")
Reported-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC config option is not really
necessary, as bulk alloc rx function can be used anyway, as long as the
necessary conditions are satisfied, which are checked already
in the library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The vector/SSE pmd used a different element type for the tx queue sw_ring
entries. This led to lots of typecasts in the code which required specific
use of bracketing, leading to subtle errors.
For example, in the original code:
txe = (struct ixgbe_tx_entry_v *)&txq->sw_ring[i];
instead needs to be written as:
txe = &((struct ixgbe_tx_entry_v *)txq->sw_ring)[i];
We can eliminate this problem, by having two software ring pointers in the
structure for the two different element types.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function inside the vector/SSE poll-mode driver for releasing
the mbufs on the TX queues had the same name as another function
inside the regular PMD. To keep consistency and avoid confusion,
rename the vector PMD version to have a "_vec" suffix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The calculations of what mbufs were valid in the RX and TX queues were
incorrect when freeing the mbufs for the vector PMD. This led to crashes
due to invalid reference counts when mbuf debugging was turned on, and
possibly other more subtle problems (such as mbufs being freed when in use)
in other cases.
To fix this, the following changes were made:
* correct counts and post-loop values in the TX release function for the
vector code.
* create a new separate RX release function for the RX vector code, since the
tracking of what mbufs are valid or not is different for that code path
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The bug fix was incorrect as it did not take account of the fact that
the mbufs that were previously freed may have since be re-allocated.
Reverts: b35d0d80f0 ("ixgbe: check mbuf refcnt when clearing a ring")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The two fields for vector RX rearming in the rx queue structure were
incorrectly labelled. Switching the comments on each around makes things
clearer.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Bug fix to remove (rxnfgpc - hw_stats->gprc) which does not account
for phy errors.
hw_stats->gprc is the Number of good (non-erred) Rx packets (from the
network) that pass L2 filtering and has a legal length as defined by
LongPacketEnable. While rxnfgpc is the Number of good (non-erred with
legal length) Rx packets (from the network) regardless of packet
filtering and receive enablement. Thus hw_stats->gprc can be > rxnfgpc
and this calculation should be removed from the calculation of ierrors.
Validated with testpmd by sending packets to the interface without
forwarding enabled - packets should be dropped and the error counters
incremented.
Fixes: f6bf669b99 ("ixgbe: account more Rx errors")
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Balazs Nemeth <balazs.nemeth@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Fix "MACRO redefined" and "function redefined" compilation errors in FreeBSD
by adding CXGBE prefix to them. Also remove reference to a linux header
linux/if_ether.h and use DPDK macros directly. Finally, enable CXGBE PMD
for FreeBSD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The fm10k driver was reading the interrupt cause register but then
using the interrupt mask register defines to look at the bits.
The result is that if a fault happens, the driver would never clear
the fault and would get into an infinite cycle of interrupts.
Note: I don't work for Intel or have the hardware manuals (probably
requires NDA anyway), but this looks logical and matches how the
known working Linux driver handles these bits.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The return in fm10k_dev_handle_fault has useless conditional
since it always returns 0 here.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jing Chen <jing.d.chen@intel.com>
If FM10K_DEBUG_DRIVER is enabled, then the log messages about
function entry are missing newline causing extremely long lines.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jing Chen <jing.d.chen@intel.com>
ixgbe_recv_pkts_lro uses field rx_free_trigger
in structure ixgbe_rx_queue, but that field is only defined
if IXGBE_RX_ALLOW_BULK_ALLOC is enabled, so even though
that field is not used when it is disabled,
compiler complains about it.
Therefore, the lines of code that use that field
have been ifdef.
Fixes: 8eecb329 ("ixgbe: add LRO support")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some minor cleanups.
* pass constant to virtio_dev_queue_setup
* fix message on rx_queue_setup
* get rid of extra double spaces
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
The virtual queue ring size and the number of slots actually usable
are separate parameters. In the most common environment (QEMU)
the virtual queue ring size is 256, but some environments the
ring maybe much larger.
The ring size comes from the host and the driver must use the
actual size passed.
The number of descriptors can be either zero to use the whole
available ring, or some value smaller. This is used to limit
the number of mbufs allocated for the receive ring. If more
descriptors are requested than available the size is silently
truncated.
Note: the ring size (from host) must be a power of two, but
the number of descriptors used can be any size from 1 to the
size of the virtual ring.
Fixes: d78deadae4 ("virtio: fix ring size negotiation")
Reported-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Cleanup the code in bonding that checks ports.
* Use standard rte_eth_dev_is_valid_port
* Change name of driver string to avoid variable namespace conflicts
* Get rid of unnecessary string comparison stuff. A simple pointer
check is enough here.
* Get rid of unnecessary assignment of driver_name, it is already
done by common code.
* Don't generate unnecessary log messages on error.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
I40e VF driver uses the num_queue_pairs in vf structure to construct
queue index look up table. When the nb_rx_queue is less than nb_tx_queue,
num_queue_pairs is equal to nb_tx_queue. It will make the table use
invalid queue index, then application cannot poll packets on these queues.
This patch also moves the inline function i40e_align_floor from
i40e_ethdev.c to i40e_ethdev.h.
Test report: http://dpdk.org/ml/archives/dev/2015-July/021838.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Due to the NIC's firmware update, the input set of sctp flow is changed
to source IP, destination IP, source port, destination port and
Verification-Tag. This patch adds the sport and dport in the programming
packet of flow director.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Add function virtio_free_queues() and call from virtio_dev_close()
Use virtio_dev_rx_queue_release() and virtio_dev_tx_queue_release()
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add functions virtio_dev_queue_release(), virtio_dev_rx_queue_release() and
virtio_dev_tx_queue_release().
Use queue_release in virtio_dev_uninit().
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
If vq is NULL, there is a segmentation fault.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit_t() function for virtio pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add i40e_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
There is a segmentation fault if rxq is NULL.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
_clear_cmd() was not being called in failure situations,
resulting in the next command also failing.
Fix several typos.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_i40e_pmd and
rte_i40evf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add ixgbe_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_ixgbe_pmd and
rte_ixgbevf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Queues were freed in clear function called in stop function.
Split clearing and freeing in separate functions to
move queue freeing from stop to close function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
