The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Some duplex values are replaced from 0 to half-duplex when link is down.
Some drivers are still using their own constants for duplex modes.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Loop that calculates total number of tx descriptors in slave tx queues
should iterate up to nb_tx_queues, not nb_rx_queues.
Fixes: 3ef7955700 ("bonding: fix LACP mempool size")
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Stopping then re-starting a bond interface containing slaves that
used polling for link detection caused the bond to think all slave
links were down and inactive.
Move the start of the polling for link from slave_add() to
bond_ethdev_start() and in bond_ethdev_stop() make sure we clear
the last_link_status of the slaves.
Fixes: a45b288ef2 ("bond: support link status polling")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch adds out-of-place operations to qat symmetric crypto PMD,
i.e. the result of the operation can be written to the destination buffer
instead of overwriting the source buffer as done in "in-place" operation.
Both buffers can be of different sizes.
Previously the qat PMD assumed that m_src and m_dst in rte_crypto_sym_op
were identical.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
In SUSE11-SP3 i686 platform, with gcc 4.5.1, there are compile issues, e.g:
null_crypto_pmd_ops.c:44:3: error:
unknown field 'sym' specified in initializer
cc1: warnings being treated as errors
The member in anonymous union initialization should be inside '{}',
otherwise it will report an error.
Fixes: 26c2e4ad5a ("cryptodev: add capabilities discovery")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
These asserts are only for debugging and never fired during
any testing, but they confuse coverity's null tracking.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yong Wang <yongwang@vmware.com>
Silence a compiler warning that this variable may be used uninitialized.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The device lsc interrupt check has a misleading whitespace around it which
can be improved by adding appropriate braces to the check. Since the ret
variable was checked after previous assignment, this introduces no functional
change.
Fixes: 921a72008f ("e1000: add Rx interrupt handler")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The register read/write mphy functions have misleading whitespace around
the `locked` check. This cleanup merely preserves the existing functionality
and suppresses future gcc versions' "misleading indentation" warning.
Suggested-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If the provided configuration does not call for RSS, then RSS is
explicitly disabled. Without this change, the device continues to
operate under the previous RSS configuration.
Fixes: 57033cdf8f ("fm10k: add PF RSS")
Signed-off-by: Michael Frasca <michael.frasca@oracle.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Now that vmxnet3 supports TCP/UDP checksum offload, let's update
the default txq flags to allow such offloads. Also fixed the tx
queue setup check to allow TCP/UDP checksum and only error out
if SCTP checksum is requested.
Fixes: f598fd063b ("vmxnet3: add Tx L4 checksum offload")
Reported-by: Heng Ding <hengx.ding@intel.com>
Signed-off-by: Yong Wang <yongwang@vmware.com>
The NFP driver (unlike other PCI devices) was not copying the pci info
from the pci_dev to the eth_dev. This would make the driver_name be
null (and other unset fields) when application uses dev_info_get.
This was found by code review; do not have the hardware.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When the number of RX queues is not a power of two,
the RETA table is configured to its maximum size for
better balancing.
Testing showed that limiting its size to 256 improves performance
noticeably with little to no impact on balancing results.
Fixes: ebb30ec64a ("mlx5: increase RETA table size")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Once freed, completed mbufs pointers are not set to NULL in the TX queue.
Clean up function must take this into account.
Fixes: 2e22920b85 ("mlx5: support non-scattered Tx and Rx")
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Calling rte_eth_dev_get_dcb_info to get dcb info from i40e
driver if VMDQ is disabled, results in a segmentation fault.
This patch fixes it by treating VMDQ and No-VMDQ respectively
when querying dcb information.
Fixes: 5135f3ca49 ("i40e: enable DCB in VMDQ VSIs")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The lower 16 bits of EICR register are used for queue interrupts,
dpdk framework take over the first bit for other interrupts like
LSC, so there're only 15 bits left for queue interrupts mapping.
This patch adds a check for the num of interrupt queues at
dev_start.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When starting testpmd with multiple queues on a ixgbe VF
port, it failed with this printing, "nb_rxq(4) is greater
than max_rx_queues(1)".
The root cause is the VF doesn't get the right max rx queue
number from PF and it uses the default value 1.
VF max rx queue number is set by PF through mailbox messages.
The message for this setting only supports version 1.1. As
message version is updated to 1.2, VF cannot parse the rx queue
number setting message correctly.
This patch raise a specific base code update for this issue.
Fixes: 72dec9e37a ("ixgbe: support multicast promiscuous mode on VF")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update the 'imissed' counter with the number of packets dropped
by the NIC.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
When the enic was disabled, link notification was correctly disabled
in the NIC but the software indicator that it was disabled was not
updated (vdev->notify_pa not set to 0). When the link came back up,
enic did not re-enable notification in the NIC.
This affected bonding when a enic slave device link bounced.
The fix is to unconditionally enable notification when the enic is
enabled.
Fixes: 9913fbb91d ("enic/base: common code")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
If the nb_pkts parameter to rte_eth_tx_burst() was greater than
the TX descriptor count, a completion was not being requested
from the NIC, so descriptors would not be released back to the
host causing a lock-up.
Introduce a limit of how many TX descriptors can be used in a single
call to the enic PMD burst TX function before requesting a completion.
Fixes: d739ba4c6a ("enic: improve Tx packet rate")
Signed-off-by: John Daley <johndale@cisco.com>
FreeBSD was not defined in ena_plat.h
ETIME is not defined in FreeBSD.
In file included from DPDK/drivers/net/ena/base/ena_com.h:37:0,
from DPDK/drivers/net/ena/ena_ethdev.h:39,
from DPDK/drivers/net/ena/ena_ethdev.c:41:
DPDK/drivers/net/ena/base/ena_plat.h:48:2: error: #error "Invalid platform"
Fixes: 99ecfbf845 ("ena: import communication layer")
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix for multiple compilation errors for ICC:
error #188: enumerated type mixed with another type
error #592: variable "flags" is used before its value is set
Fixes: 99ecfbf845 ("ena: import communication layer")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Build log:
/root/dpdk/app/test-pmd/cmdline.c:6687:45: error: no member named
's6_addr32' in 'struct in6_addr'
rte_be_to_cpu_32(res->ip_value.addr.ipv6.s6_addr32[i]);
This is caused by macro "s6_addr32" not defined on FreeBSD and testpmd
swap big endian parameter to host endian. Move the swap action to i40e
ethdev will fix this issue.
Fixes: 7b1312891b ("ethdev: add IP in GRE tunnel")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
The code uses "entry" in the next loop of LIST_FOREACH after calling free()
on it in i40e_res_pool_destroy().
Change to a safe way to free entry, which is similar with LIST_FOREACH_SAFE
in FreeBSD.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Jiangu Zhao <zhaojg@arraynetworks.com.cn>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This solves issues when an active device is added to a bond.
If a device to be enslaved already has transmit and/or receive queues
allocated, use those and then create any additional queues that are
necessary.
Fixes: 2efb58cbab ("bond: new link bonding library")
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
On the 82575 chipset, there is a pool of global TX contexts instead of 2
per queues on 82576. See Table A-1 "Changes in Programming Interface
Relative to 82575" of Intel® 82576EB GbE Controller datasheet (*).
In the driver, the contexts are attributed to a TX queue: 0-1 for txq0,
2-3 for txq1, and so on.
In igbe_set_xmit_ctx(), the variable ctx_curr contains the index of the
per-queue context (0 or 1), and ctx_idx contains the index to be given
to the hardware (0 to 7). The size of txq->ctx_cache[] is 2, and must
be indexed with ctx_curr to avoid an out-of-bound access.
Also, the index returned by what_advctx_update() is the per-queue
index (0 or 1), so we need to add txq->ctx_start before sending it
to the hardware.
(*) The datasheets says 16 global contexts, however the IDX fields in TX
descriptors are 3 bits, which gives a total of 8 contexts. The
driver assumes there are 8 contexts on 82575: 2 per queues, 4 txqs.
Fixes: 4c8db5f09a ("igb: enable TSO support")
Fixes: af75078fec ("first public release")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When using RSS, the number of rxqs has to be a power of two.
This is a problem because there is no API in DPDK that makes
the application aware of that.
A good compromise is to allow the application to request a
number of rxqs that is not a power of 2, but having inactive
queues that will never receive packets. In this configuration,
a warning will be issued to users to let them know that
this is not an optimal configuration.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
l2 tunnel and e-tag are not supported on the new x550em_a NICs, due
to missing checks for that mac type in the code.
This patch adds in the necessary conditional checks to enable the features
for x550em_a.
Fixes: 22e77d4501 ("ixgbe: support L2 tunnel operations")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
An issue is found on x550em NICs: ieee1588 is not working, the time is
always reported as 0.
The root cause is that the timer is only supported by the driver for x550,
switch statement entries are missing for x550em_x and x550em_a. This patch
adds those missing entries.
Fixes: a7740dc130 ("ixgbe: support new devices and MAC types")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The current_primary_port is initialised to an invalid value
during bonded device creation.
It must be set to a valid value later.
This fix sets it to a valid value when the first slave port
is added to the bonding device.
Fixes: 2efb58cbab ("bond: new link bonding library")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
icc (icc (ICC) 16.0.1 20151021) is generating following compile error:
CC ixgbe_rxtx.o
.../drivers/net/ixgbe/ixgbe_rxtx.c(153): error #3656: variable
"free" may be used before its value is set
(nb_free > 0 && m->pool != free[0]->pool)) {
^
Indeed this is a false positive and code is correct.
"nb_free" check prevents the free[] access before its value set.
Disabling this icc warning (#3656) for file ixgbe_rxtx.c.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Ixgbe HW supports 128 TX queues. However, the full 128 queues are only
available in VT and DCB mode. In normal default "none" mode (VT/DCB off)
the maximum number of available queues is only 64.
The driver doesn't check the mode when reporting the available
number of queues, allowing more that 64 queues to be used in all cases.
If a queue no. >=64 is used in default mode, the TX packets will be dropped
silently.
This change adds a check to forbid using a queue number larger than 64
during device configuration (in default mode), so that the problem is
reported as early as possible.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Internal variable containing the number of TX queues for a device,
was being incorrectly assigned the number of RX queues, instead of TX.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In the function set_rx_mode, the pointer of device data points
to the wrong address as found in ixgbe code, and fixed in commit:
"ixgbe: fix PF promiscuous mode after VF closed"
Fixes: be2d648a2d ("igb: add PF support")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
There's an issue reported. In the scenario DPDK PF + DPDK VF,
if the VF port is closed, PF port cannot receive packets.
I found at that time the promicuous mode is disabled on the PF
port. But it should be enabled.
When VF port is closed, it will send a message to its PF port to
reset it. During this, PF port will also reset its own
promicuous mode. Which promiscuous mode should be set depends on
the parameter stored in the device data. In the function
set_rx_mode, the pointer of device data points to the wrong
address. So, the promiscuous mode is wrong.
Fixes: 00e30184da ("ixgbe: add PF support")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Current vector RX can't always set the packet_type properly.
To be more specific:
a) it never sets RTE_PTYPE_L2_ETHER
b) it doesn't handle tunnel ipv4/ipv6 case correctly.
c) it doesn't check is IXGBE_RXDADV_PKTTYPE_ETQF set or not.
While a) is pretty easy to fix, b) and c) are not that straightforward
in terms of SIMD ops (specially b).
So far I wasn't able to make vRX support packet_type properly without
noticeable performance loss.
So for now, just remove that functionality from vector RX and
update dev_supported_ptypes_get().
Fixes: 3962541758 ("mbuf: redefine packet type")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Notify user otherwise. A similar check has already been added to mlx5 in
commit "mlx5: check port is configured as ethernet device".
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Currently, the maximum value of rx/tx queues are kept by EAL. But,
the value is used like below with different meanings in vhost PMD.
- The maximum value of current enabled queues.
- The maximum value of current supported queues.
This wrong double meaning will cause an issue like below steps.
* Invoke application with below option.
--vdev 'eth_vhost0,iface=<socket path>,queues=4'
* Configure queues like below.
rte_eth_dev_configure(portid, 2, 2, ...);
* Configure queues again like below.
rte_eth_dev_configure(portid, 4, 4, ...);
The second rte_eth_dev_configure() will fail because both
the maximum value of current enabled queues and supported queues
will be '2' after calling first rte_eth_dev_configure().
To fix the issue, the patch adds another variable to keep the maximum
number of supported queues in vhost PMD.
Fixes: 23981fb0d78b ("vhost: Add vhost PMD")
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
Issue:
When CONFIG_RTE_LIBTRE_I40E_RX_ALLOW_BULK_ALLOC=n in config file, there
will be a build error:
'i40e_recv_pkts_bulk_alloc' undeclared
Now DPDK i40e PMD uses the preprocessor to choose whether or not to define
the bulk recv functions, but for selection of the RX function, PMD only
depends on a C variable. This causes the inconsistency and leads to the
build error due to the bulk recv function not being defined.
Fixes: 8e109464c0 ("i40e: allow vector Rx and Tx usage")
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch extends flow director to select vlan id as part of
filter's input set and program the filter rule with vlan id.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds missing VLAN bitmask for inner frame in case of
tunneling and fixes VLAN tags bitmasks for single or outer frame
in case of tunneling.
Fixes: 98f0557076 ("i40e: configure input fields for RSS or flow director")
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends flow director to select more IP Header fields
as filter input set.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a new function to set the fdir input set to default
when initialization.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
